Catalytic ozonation is regarded as a promising technology in the advanced treatment of refractory organic wastewater.Packed-bed reactors are widely used in practical applications due to simple structures,installation ...Catalytic ozonation is regarded as a promising technology in the advanced treatment of refractory organic wastewater.Packed-bed reactors are widely used in practical applications due to simple structures,installation and operation.However,mass transfer of packed-bed reactors is relatively restrained and amplified deviations usually occurred in scale-up application.Herein,a multi-scale packed-bed model of catalytic ozonation was established to guide pilot tests.First,a laboratory-scale test was conducted to obtain kinetic parameters needed for modeling.Then,a multi-scale packed-bed model was developed to research the effects of water distribution structure,catalyst particle size,and hydraulic retention time(HRT)on catalytic ozonation.It was found that the performance of packed bed reactor was increased with evenly distributed water inlet,HRT of 60 min,and catalyst diameter of about 3-7 mm.Last,an optimized reactor was manufactured and a pilot-scale test was conducted to treat kitchen wastewater using catalytic ozonation process.In the pilot-scale test with an ozone dosage of 50 mg/L and HRT of 60 min,the packed-bed reactor filled with catalysts I was able to reduce chemical oxygen demand(COD)from 117 to 59 mg/L.The performance of the catalytic ozonation process in the packed-bed reactor for the advanced treatment of actual kitchen wastewater was investigated via both multi-scale simulation and pilot-scale tests in this study,which provided a practical method for optimizing the reactors of treating refractory organic wastewater.展开更多
Pr_(83)Cu_(17)(wt%) grain boundary reconstruction was applied to prepare sintered NdFeB magnets. The effects of addition amount and annealing on the bending strength were investigated. The results show that Pr_(83)Cu_...Pr_(83)Cu_(17)(wt%) grain boundary reconstruction was applied to prepare sintered NdFeB magnets. The effects of addition amount and annealing on the bending strength were investigated. The results show that Pr_(83)Cu_(17) can not only effectively enhance the bending strength, but also change the mechanical anisotropy in two directions parallel and perpendicular to c-axis. The bending strength perpendicular to c-axis reaches 404 MPa in 10 wt% addition magnet, higher than 348 MPa along parallel direction. This change is attributed to the preferred distribution of boundary phases, i.e., ductile(Nd,Pr)-Fe-Cu phase along perpendicular direction to c-axis and(Nd,Pr)-Fe phase along parallel direction. Moreover, the Cu migration during 480 ℃ annealing is found to be related to this boundary phase distribution.展开更多
基金supported by the“Explorer 100”cluster system of Tsinghua HPC Platform.
文摘Catalytic ozonation is regarded as a promising technology in the advanced treatment of refractory organic wastewater.Packed-bed reactors are widely used in practical applications due to simple structures,installation and operation.However,mass transfer of packed-bed reactors is relatively restrained and amplified deviations usually occurred in scale-up application.Herein,a multi-scale packed-bed model of catalytic ozonation was established to guide pilot tests.First,a laboratory-scale test was conducted to obtain kinetic parameters needed for modeling.Then,a multi-scale packed-bed model was developed to research the effects of water distribution structure,catalyst particle size,and hydraulic retention time(HRT)on catalytic ozonation.It was found that the performance of packed bed reactor was increased with evenly distributed water inlet,HRT of 60 min,and catalyst diameter of about 3-7 mm.Last,an optimized reactor was manufactured and a pilot-scale test was conducted to treat kitchen wastewater using catalytic ozonation process.In the pilot-scale test with an ozone dosage of 50 mg/L and HRT of 60 min,the packed-bed reactor filled with catalysts I was able to reduce chemical oxygen demand(COD)from 117 to 59 mg/L.The performance of the catalytic ozonation process in the packed-bed reactor for the advanced treatment of actual kitchen wastewater was investigated via both multi-scale simulation and pilot-scale tests in this study,which provided a practical method for optimizing the reactors of treating refractory organic wastewater.
基金supported by National Natural Science Foundation of China(51401021)the State Key Laboratory Advanced Metals and Materials(20162-14)
文摘Pr_(83)Cu_(17)(wt%) grain boundary reconstruction was applied to prepare sintered NdFeB magnets. The effects of addition amount and annealing on the bending strength were investigated. The results show that Pr_(83)Cu_(17) can not only effectively enhance the bending strength, but also change the mechanical anisotropy in two directions parallel and perpendicular to c-axis. The bending strength perpendicular to c-axis reaches 404 MPa in 10 wt% addition magnet, higher than 348 MPa along parallel direction. This change is attributed to the preferred distribution of boundary phases, i.e., ductile(Nd,Pr)-Fe-Cu phase along perpendicular direction to c-axis and(Nd,Pr)-Fe phase along parallel direction. Moreover, the Cu migration during 480 ℃ annealing is found to be related to this boundary phase distribution.
