Grain shape of the hot deforming alloy is an important of material. The fractal theory was applied to analyze index to character the microstructure and performance the recrystallized microstructure of Ti-15-3 alloy af...Grain shape of the hot deforming alloy is an important of material. The fractal theory was applied to analyze index to character the microstructure and performance the recrystallized microstructure of Ti-15-3 alloy after hot deformation and solution treatment. The fractal dimensions of recrystallized grains were calculated by slit island method. The influence of processing parameters on fractal dimension and grain size was studied, It has been shown that the shapes of recrystallized grain boundaries are self-similar, and the fractal dimension varies from 1 to 2. With increasing deformation degree and strain rate or decreasing deformation temperature, the fractal dimension of grain boundaries increased and the grain size decreased. So the fractal dimension could characterize the grain shape and size. A neural network model was trained to predict the fractal dimension of recrystallized microstructure and the result is in excellent agreement with the experimental data.展开更多
The Mg–Zn–Gd alloy with quasicrystal icosahedral phase was processed by high-pressure torsion (HPT). The effect of bimodal I-phase on the dynamic recrystallization was analyzed by transmission electron microscopy. T...The Mg–Zn–Gd alloy with quasicrystal icosahedral phase was processed by high-pressure torsion (HPT). The effect of bimodal I-phase on the dynamic recrystallization was analyzed by transmission electron microscopy. The results showed that the block I-phase can stimulate obvious particle-stimulated nucleation and dynamic recrystallization (DRX) grains were preferentially formed after HPT for 5 turns, while the granular I-phase only promoted the generation of sub-grains. The orientation relationship was determined as twofold//[1210] and fivefold//(0002)_(Mg). Moreover, after HPT for 9 turns, the DRX grains induced by block I-phase appeared to grow up and coarsened. Compared with block I-phase, the grains induced by granular I-phase presented much smaller size and distributed more homogeneous due to the strong pinning effect.展开更多
基金supported by the National Natural Science Foundation of China under grant No.50405020.
文摘Grain shape of the hot deforming alloy is an important of material. The fractal theory was applied to analyze index to character the microstructure and performance the recrystallized microstructure of Ti-15-3 alloy after hot deformation and solution treatment. The fractal dimensions of recrystallized grains were calculated by slit island method. The influence of processing parameters on fractal dimension and grain size was studied, It has been shown that the shapes of recrystallized grain boundaries are self-similar, and the fractal dimension varies from 1 to 2. With increasing deformation degree and strain rate or decreasing deformation temperature, the fractal dimension of grain boundaries increased and the grain size decreased. So the fractal dimension could characterize the grain shape and size. A neural network model was trained to predict the fractal dimension of recrystallized microstructure and the result is in excellent agreement with the experimental data.
基金support from the National Natural Science Foundation of China(Grant Nos.51975175 and 52375329)the Projects of Natural Science Key Research of Anhui Province(2023AH051664).
文摘The Mg–Zn–Gd alloy with quasicrystal icosahedral phase was processed by high-pressure torsion (HPT). The effect of bimodal I-phase on the dynamic recrystallization was analyzed by transmission electron microscopy. The results showed that the block I-phase can stimulate obvious particle-stimulated nucleation and dynamic recrystallization (DRX) grains were preferentially formed after HPT for 5 turns, while the granular I-phase only promoted the generation of sub-grains. The orientation relationship was determined as twofold//[1210] and fivefold//(0002)_(Mg). Moreover, after HPT for 9 turns, the DRX grains induced by block I-phase appeared to grow up and coarsened. Compared with block I-phase, the grains induced by granular I-phase presented much smaller size and distributed more homogeneous due to the strong pinning effect.
