This paper reports on modem developments related to nanotechnology of cement and concrete. Recent advances in instrumentation and design of advanced nano-composite materials is discussed. New technological directions ...This paper reports on modem developments related to nanotechnology of cement and concrete. Recent advances in instrumentation and design of advanced nano-composite materials is discussed. New technological directions and historical milestones in nanoengineering and nanomodification of cement-based materials are presented. It is concluded that there is a strong potential of nanotechnology to improve the performance of cement-based materials.展开更多
The nanoparticles of SiO2 were used in cement systems to modify the rheological behavior, to enhance the reactivity of supplementary cementitious materials, and also to improve the strength and durability. In this res...The nanoparticles of SiO2 were used in cement systems to modify the rheological behavior, to enhance the reactivity of supplementary cementitious materials, and also to improve the strength and durability. In this research, low-cost nano-SiO2 particles from natural hydrothermal solutions obtained by membrane ultrafiltration and, optionally, by cryochemical vacuum sublimation drying, were evaluated in portland cement based systems. The SiO2-rich solutions were obtained from the wells of Mutnovsky geothermal power station （Far East of Russia）. The constant nano-SiO2 dosage of 0.25% （as a solid material by weight of cementitious materials） was used to compare the cement systems with different nanoparticles against a reference mortar and a commercially available nano-SiO2. Nanoparticles were characterized by X-Ray Diffraction （XRD）, BET Surface Area, Scanning Electron Microscope （SEM） and Fourier Transform Infrared （FTIR） spectroscopy techniques. It was demonstrated that the addition of polycarboxylate ether superplasticizer and the dispersion treatment using an ultrasound processor can be used to facilitate the distribution ofnano-SiOz particles in the mixing water. The effect ofnano-SiO2 particles in portland cement mortars was investigated by evaluating the flow, heat of hydration and compressive strength development. It was demonstrated that the use ofnano- SiO2 particles can reduce the segregation and improve strength properties.展开更多
Atomic Force Microscope （AFM） is a relatively new technique for investigation of construction materials. In this study AFM was used to investigate the interaction of asphalt binder with fly ash. Fly ash is a coal co...Atomic Force Microscope （AFM） is a relatively new technique for investigation of construction materials. In this study AFM was used to investigate the interaction of asphalt binder with fly ash. Fly ash is a coal combustion byproduct of electric power utilities having pozzolanic properties and commonly used in Portland cement concrete. In this study, an investigation was made by using different types of fly ash with two types of asphalt binders such as PG 58-28 and PG 64-28. Asphalt microstructure is divided into four subgroups such as Saturates, Aromatics, Resins and Asphaltenes （SARA）. These four phases can be distinguished by the atomic force microscope. The interaction of these phases affected by introducing fly-ash was investigated and correlation with rheological properties was observed.展开更多
文摘This paper reports on modem developments related to nanotechnology of cement and concrete. Recent advances in instrumentation and design of advanced nano-composite materials is discussed. New technological directions and historical milestones in nanoengineering and nanomodification of cement-based materials are presented. It is concluded that there is a strong potential of nanotechnology to improve the performance of cement-based materials.
文摘The nanoparticles of SiO2 were used in cement systems to modify the rheological behavior, to enhance the reactivity of supplementary cementitious materials, and also to improve the strength and durability. In this research, low-cost nano-SiO2 particles from natural hydrothermal solutions obtained by membrane ultrafiltration and, optionally, by cryochemical vacuum sublimation drying, were evaluated in portland cement based systems. The SiO2-rich solutions were obtained from the wells of Mutnovsky geothermal power station （Far East of Russia）. The constant nano-SiO2 dosage of 0.25% （as a solid material by weight of cementitious materials） was used to compare the cement systems with different nanoparticles against a reference mortar and a commercially available nano-SiO2. Nanoparticles were characterized by X-Ray Diffraction （XRD）, BET Surface Area, Scanning Electron Microscope （SEM） and Fourier Transform Infrared （FTIR） spectroscopy techniques. It was demonstrated that the addition of polycarboxylate ether superplasticizer and the dispersion treatment using an ultrasound processor can be used to facilitate the distribution ofnano-SiOz particles in the mixing water. The effect ofnano-SiO2 particles in portland cement mortars was investigated by evaluating the flow, heat of hydration and compressive strength development. It was demonstrated that the use ofnano- SiO2 particles can reduce the segregation and improve strength properties.
文摘Atomic Force Microscope （AFM） is a relatively new technique for investigation of construction materials. In this study AFM was used to investigate the interaction of asphalt binder with fly ash. Fly ash is a coal combustion byproduct of electric power utilities having pozzolanic properties and commonly used in Portland cement concrete. In this study, an investigation was made by using different types of fly ash with two types of asphalt binders such as PG 58-28 and PG 64-28. Asphalt microstructure is divided into four subgroups such as Saturates, Aromatics, Resins and Asphaltenes （SARA）. These four phases can be distinguished by the atomic force microscope. The interaction of these phases affected by introducing fly-ash was investigated and correlation with rheological properties was observed.
