期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
单向复合材料单搭接粘结节点的破坏预测及增强 被引量:13
1
作者 kwang-soo kim Yeong-Moo Yi +1 位作者 Gwang-Rae Cho Chun-Gon kim 《钢结构》 2008年第7期85-85,共1页
提出了一种预测复合材料单搭接粘结节点在复合材料本体和粘结界面上破坏的方法。该方法采用了粘结剂和分层破坏判断的一个完全弹塑性模型,采用有限元方法和本文方法进行破坏预测。预测结果显示:破坏模式和强度都与各种粘结方法和参数下... 提出了一种预测复合材料单搭接粘结节点在复合材料本体和粘结界面上破坏的方法。该方法采用了粘结剂和分层破坏判断的一个完全弹塑性模型,采用有限元方法和本文方法进行破坏预测。预测结果显示:破坏模式和强度都与各种粘结方法和参数下进行的节点模型试验结果吻合很好。基于数值分析,建立最佳节点强度条件,并提出一种新的提高节点强度的方法。验证结果表明:该方法可显著提高节点强度。 展开更多
关键词 复合材料粘结节点 破坏预测 粘结破坏 单搭接
下载PDF
Propylene Polymerization by TiCl_4 Supported on Mg(OEt)_2 Activating with Ethanol/CO_2 System
2
作者 Dong-hoLEE kwang-soo kim 《应用化学》 CAS CSCD 北大核心 2001年第5期310-315,共6页
In the preparation of catalyst for propylene polymerization, the Mg(OEt) 2 support was activated with ethanol/CO 2 system followed by solidification, and treated with TiCl 4 in the presence of ethylbenzoate as an inte... In the preparation of catalyst for propylene polymerization, the Mg(OEt) 2 support was activated with ethanol/CO 2 system followed by solidification, and treated with TiCl 4 in the presence of ethylbenzoate as an internal donor(ID). The chemical compositions of the activated support and the prepared catalyst were examined in detail. During the dissolution of Mg(OEt) 2 support in ethanol medium with CO 2 bubbling, the structure of support changed to magnesium hydrocarbyl carbonate, (CH 3CH 2O) 2- x Mg(O (C O) OCH 2CH 3) x ( x = 1,2). The content of carbonated CO 2 in the activated support was dependent on the heat treatment in the solidification of support. In the preparation procedure of polymerization catalyst, the activated support was treated with TiCl 4 so that the structure of support was converted to MgCl 2 with the incorporation of ID. The polymerization behavior of the pre-pared catalyst was also studied in the presence of phenyltriethoxysilane as an external donor. 展开更多
关键词 丙烯 催化聚合 聚丙烯 乙醇镁 四氯化钛 负载型催化剂 催化活性
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部