The discovery of chirped pulse amplification has led to great improvements in laser technology,enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few micrometer...The discovery of chirped pulse amplification has led to great improvements in laser technology,enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few micrometers.Protons with energies of tens of MeV can be accelerated using,for instance,target normal sheath acceleration and focused on secondary targets.Under such conditions,nuclear reactions can occur,with the production of radioisotopes suitable for medical application.The use of high-repetition lasers to produce such isotopes is competitive with conventional methods mostly based on accelerators.In this paper,we study the production of^(67)Cu,^(63)Zn,^(18)F,and^(11)C,which are currently used in positron emission tomography and other applications.At the same time,we study the reactions^(10)B(p,α)^(7)Be and^(70)Zn(p,4n)^(67)Ga to put further constraints on the proton distributions at different angles,as well as the reaction^(11)B(p,α)^(8)Be relevant for energy production.The experiment was performed at the 1 PW laser facility at VegaⅢin Salamanca,Spain.Angular distributions of radioisotopes in the forward(with respect to the laser direction)and backward directions were measured using a high purity germanium detector.Our results are in reasonable agreement with numerical estimates obtained following the approach of Kimura and Bonasera[Nucl.Instrum.Methods Phys.Res.,Sect.A 637,164–170(2011)].展开更多
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for ...The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation,although to-date this has been the accepted methodology due to low data acquisition rates.High repetition-rate(HRR)lasers augmented by machine learning present a valuable opportunity for efficient source optimization.Here,an automated,HRR-compatible system produced high-fidelity parameter scans,revealing the influence of laser intensity on target pre-heating and proton generation.A closed-loop Bayesian optimization of maximum proton energy,through control of the laser wavefront and target position,produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60%of the laser energy.This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.展开更多
We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was meas...We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was measured to be stable on the sub-micrometre scale,compatible with the high-numerical aperture focusing geometries required to achieve relativistic intensity interactions with the pulse energy available in current multi-Hz and near-future higher repetition-rate lasers(>kHz).Long-term drift was characterized at 100 Hz demonstrating suitability for operation over extended periods.The target was continuously operated at up to 5 Hz in a recent experiment for 70,000 shots without intervention by the experimental team,with the exception of tape replacement,producing the largest data-set of relativistically intense laser–solid foil measurements to date.This tape drive provides robust targetry for the generation and study of high-repetitionrate ion beams using next-generation high-power laser systems,also enabling wider applications of laser-driven proton sources.展开更多
Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora e...Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora et al.,Laser Part. Beams 33, 607(2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10^(20) cm s^(-2)for plasma blocks was theoretically and numerically predicted since 1978(Hora, Physics of Laser Driven Plasmas(Wiley, 1981), pp. 178 and 179) and measured(Sauerbrey, Phys. Plasmas 3, 4712(1996)) in exact agreement(Hora et al., Phys. Plasmas 14, 072701(2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell's stress tensor by the dielectric properties of plasma leading to the nonlinear(ponderomotive) force f_(NL)resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions(Labaune et al., Nature Commun.4, 2506(2013)).展开更多
文摘The discovery of chirped pulse amplification has led to great improvements in laser technology,enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few micrometers.Protons with energies of tens of MeV can be accelerated using,for instance,target normal sheath acceleration and focused on secondary targets.Under such conditions,nuclear reactions can occur,with the production of radioisotopes suitable for medical application.The use of high-repetition lasers to produce such isotopes is competitive with conventional methods mostly based on accelerators.In this paper,we study the production of^(67)Cu,^(63)Zn,^(18)F,and^(11)C,which are currently used in positron emission tomography and other applications.At the same time,we study the reactions^(10)B(p,α)^(7)Be and^(70)Zn(p,4n)^(67)Ga to put further constraints on the proton distributions at different angles,as well as the reaction^(11)B(p,α)^(8)Be relevant for energy production.The experiment was performed at the 1 PW laser facility at VegaⅢin Salamanca,Spain.Angular distributions of radioisotopes in the forward(with respect to the laser direction)and backward directions were measured using a high purity germanium detector.Our results are in reasonable agreement with numerical estimates obtained following the approach of Kimura and Bonasera[Nucl.Instrum.Methods Phys.Res.,Sect.A 637,164–170(2011)].
基金support from the UK STFC grants ST/V001639/1 with the XFEL Physical Sciences Hub and ST/P002021/1the UK EPSRC grants EP/V049577/1 and EP/R006202/1+5 种基金as well as the U.S.DOE Office of Science,Fusion Energy Sciences under FWP No.100182in part by the National Science Foundation under Grant No.1632708 and Award No.PHY–1903414M.J.V.S.acknowledges support from the Royal Society URFR1221874support from the DOE NNSA SSGF program under DE-NA0003960support from the U.S.DOE grant DESC0016804support from the project‘Advanced research using high-intensity laser-produced photons and particles’(CZ.02.1.01/0.0/0.0/16_019/0000789)from the European Regional Development Fund(ADONIS)。
文摘The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation,although to-date this has been the accepted methodology due to low data acquisition rates.High repetition-rate(HRR)lasers augmented by machine learning present a valuable opportunity for efficient source optimization.Here,an automated,HRR-compatible system produced high-fidelity parameter scans,revealing the influence of laser intensity on target pre-heating and proton generation.A closed-loop Bayesian optimization of maximum proton energy,through control of the laser wavefront and target position,produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60%of the laser energy.This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
基金Special thanks go to the staff at the Central Laser Facility who provided laser operational support,mechanical and electrical support and computational and administrative support throughout the experiment.We acknowledge funding from UK STFC,Grant Nos.ST/P002021/1 and ST/V001639/1U.S.DOE Office of Science,Fusion Energy Sciences under FWP No.100182+2 种基金in part by the National Science Foundation under Grant No.1632708G.D.G.acknowledges support from the DOE NNSA SSGF program under DE-NA0003960This work has been partially supported by the project Advanced Research Using High-intensity Laser-produced Photons and Particles(CZ.02.1.01/0.0/0.0/16_019/0000789)from the European Regional Development Fund(ADONIS).
文摘We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was measured to be stable on the sub-micrometre scale,compatible with the high-numerical aperture focusing geometries required to achieve relativistic intensity interactions with the pulse energy available in current multi-Hz and near-future higher repetition-rate lasers(>kHz).Long-term drift was characterized at 100 Hz demonstrating suitability for operation over extended periods.The target was continuously operated at up to 5 Hz in a recent experiment for 70,000 shots without intervention by the experimental team,with the exception of tape replacement,producing the largest data-set of relativistically intense laser–solid foil measurements to date.This tape drive provides robust targetry for the generation and study of high-repetitionrate ion beams using next-generation high-power laser systems,also enabling wider applications of laser-driven proton sources.
文摘Measured highly elevated gains of proton–boron(HB11) fusion(Picciotto et al., Phys. Rev. X 4, 031030(2014))confirmed the exceptional avalanche reaction process(Lalousis et al., Laser Part. Beams 32, 409(2014); Hora et al.,Laser Part. Beams 33, 607(2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10^(20) cm s^(-2)for plasma blocks was theoretically and numerically predicted since 1978(Hora, Physics of Laser Driven Plasmas(Wiley, 1981), pp. 178 and 179) and measured(Sauerbrey, Phys. Plasmas 3, 4712(1996)) in exact agreement(Hora et al., Phys. Plasmas 14, 072701(2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell's stress tensor by the dielectric properties of plasma leading to the nonlinear(ponderomotive) force f_(NL)resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions(Labaune et al., Nature Commun.4, 2506(2013)).