Athermal third harmonic generation in micro‐ring resonators

Nonlinear high-harmonic generation in micro-resonators is a common technique used to extend the operating range of applications such as self-referencing systems and coherent communications in the visible region.However,the generated high-harmonic emissions are subject to a resonance shift with a change in temperature.We present a comprehensive study of the thermal behavior induced phase mismatch that shows this resonance shift can be compensated by a combination of the linear and nonlinear thermo-optics effects.Using this model,we predict and experimentally demonstrate visible third harmonic modes having temperature dependent wavelength shifts between−2.84 pm/ºC and 2.35 pm/ºC when pumped at the L-band.Besides providing a new way to achieve athermal operation,this also allows one to measure the thermal coefficients and Q-factor of the visible modes.Through steady state analysis,we have also identified the existence of stable athermal third harmonic generation and experimentally demonstrated orthogonally pumped visible third harmonic modes with a temperature dependent wavelength shift of 0.05 pm/ºC over a temperature range of 12ºC.Our findings promise a configurable and active temperature dependent wavelength shift compensation scheme for highly efficient and precise visible emission generation for potential 2f–3f self-referencing in metrology,biological and chemical sensing applications.

Advances in soliton microcomb generation

Optical frequency combs,a revolutionary light source characterized by discrete and equally spaced frequencies,are usually regarded as a cornerstone for advanced frequency metrology,precision spectroscopy,high-speed communication,distance ranging,molecule detection,and many others.Due to the rapid development of micro/nanofabrication technology,breakthroughs in the quality factor of microresonators enable ultrahigh energy buildup inside cavities,which gives birth to microcavity-based frequency combs.In particular,the full coherent spectrum of the soliton microcomb(SMC)provides a route to low-noise ultrashort pulses with a repetition rate over two orders of magnitude higher than that of traditional mode-locking approaches.This enables lower power consumption and cost for a wide range of applications.This review summarizes recent achievements in SMCs,including the basic theory and physical model,as well as experimental techniques for single-soliton generation and various extraordinary soliton states(soliton crystals,Stokes solitons,breathers,molecules,cavity solitons,and dark solitons),with a perspective on their potential applications and remaining challenges.

Influences of multiphoton absorption and freecarrier effects on frequency-comb generation in normal dispersion silicon microresonators

We investigate frequency-comb generation in normal dispersion silicon microresonators from the near-infrared to mid-infrared wavelength range in the presence of multiphoton absorption and free-carrier effects. It is found that parametric oscillation is inhibited in the telecom wavelength range resulting from strong two-photon absorption.On the contrary, beyond the wavelength of 2200 nm, where three-and four-photon absorption are less detrimental,a comb can be generated with moderate pump power, or free-carriers are swept out by a positive-intrinsic-negative structure. In the temporal domain, the generated combs correspond to flat-top pulses, and the pulse duration can be easily controlled by varying the laser detuning. The reported comb generation process shows a high conversion efficiency compared with anomalous dispersion regime, which can guide and promote comb formation in materials with normal dispersion. As the comb spectra cover the mid-infrared wavelength range, they can find applications in comb-based radiofrequency photonic filters and mid-infrared spectroscopy.

Program-controlled single soliton microcomb source

Soliton microcombs(SMCs)are spontaneously formed in a coherently pumped high-quality microresonator,which provides a new tool for use as an on-chip frequency comb for applications of high-precision metrology and spectroscopy.However,generation of SMCs seriously relies on advanced experimental techniques from professional scientists.Here,we experimentally demonstrate a program-controlled single SMC source where the intracavity thermal effect is timely balanced using an auxiliary laser during single SMC generation.The microcomb power is adopted as the criteria for microcomb states discrimination and a forward and backward thermal tuning technique is employed for the deterministic single SMC generation.Further,based on a closed-loop control system,the repetition rate stability of the SMC source improved more than 20 times and the pump frequency can be continuously tuned by simply changing the operation temperature.The reliability of the SMC source is verified by consecutive 200 generation trials and maintaining over 10 h.We believe the proposed SMC source will have significant promising influences in future SMC-based application development.

Numerical simulation and temporal characterization of dual-pumped microringresonator-based optical frequency combs

Dual-pumped microring-resonator-based optical frequency combs(OFCs) and their temporal characteristics are numerically investigated and experimentally explored. The calculation results obtained by solving the driven and damped nonlinear Schr?dinger equation indicate that an ultralow coupled pump power is required to excite the primary comb modes through a non-degenerate four-wave-mixing(FWM) process and, when the pump power is boosted, both the comb mode intensities and spectral bandwidths increase. At low pump powers, the field intensity profile exhibits a cosine variation manner with frequency equal to the separation of the two pumps, while a roll Turing pattern is formed resulting from the increased comb mode intensities and spectral bandwidths at high pump powers. Meanwhile, we found that the power difference between the two pump fields can be transferred to the newly generated comb modes, which are located on both sides of the pump modes, through a cascaded FWM process. Experimentally, the dual-pumped OFCs were realized by coupling two self-oscillating pump fields into a microring resonator. The numerically calculated comb spectrum is verified by generating an OFC with 2.0 THz mode spacing over 160 nm bandwidth. In addition, the formation of a roll Turing pattern at high pump powers is inferred from the measured autocorrelation trace of a 10 free spectral range(FSR) OFC. The experimental observations accord well with the numerical predictions. Due to their large and tunable mode spacing, robustness,and flexibility, the proposed dual-pumped OFCs could find potential applications in a wide range of fields,including arbitrary optical waveform generation, high-capacity optical communications, and signal-processing systems.

Mid-infrared broadband optical frequency comb generated in MgF_2 resonators

Microresonator-based optical frequency combs are broadband light sources consisting of equally spaced and coherent narrow lines,which are extremely promising for applications in molecular spectroscopy and sensing in the mid-infrared(MIR)spectral region.There are still great challenges in exploring how to improve materials for microresonator fabrication,extend spectral bandwidth of parametric combs,and realize fully stabilized soliton MIR frequency combs.Here,we present an effective scheme for broadband MIR optical frequency comb generation in a MgF_(2) crystalline microresonator pumped by the quantum cascade laser.The spectral evolution dynamics of the MIR Kerr frequency comb is numerically investigated,revealing the formation mechanism of the microresonator soliton comb via scanning the pump-resonance detuning.We also experimentally implement the modulation instability state MIR frequency comb generation in MgF_(2) resonators covering from 3380 nm to 7760 nm.This work proceeds microresonator-based comb technology toward a miniaturization MIR spectroscopic device that provides potential opportunities in many fields such as fundamental physics and metrology.