超薄磨耗层是公路预防性养护最有效的技术手段之一,热拌超薄磨耗层混合料由于生产施工温度较高,不仅会造成资源浪费,还会使混合料老化严重、性能下降。通过在高黏沥青中添加降黏剂可有效降低沥青高温条件下的黏度,从而降低拌和温度。研...超薄磨耗层是公路预防性养护最有效的技术手段之一,热拌超薄磨耗层混合料由于生产施工温度较高,不仅会造成资源浪费,还会使混合料老化严重、性能下降。通过在高黏沥青中添加降黏剂可有效降低沥青高温条件下的黏度,从而降低拌和温度。研究表明,Sasobit、聚乙烯蜡和SZ能有效降低沥青的黏度,以1000 m Pa·s为基准黏度情况下能降低拌和温度约15℃,磨耗层混合料性能测试结果表明添加Sasobit和聚乙烯蜡可提升沥青混合料的高温稳定性,然而马歇尔稳定度、水稳定性和抗松散性能有所降低。而国产SZ降黏剂不仅能提升混合料的高温性能,还能提升马歇尔稳定度和抗水损害性能,是一种高性能降黏剂。展开更多
There is a cross-cutting relationship between the E-W trending structures and the NE- trending structures in the northern Longmen-Micang Mountains region, which reflects possible regional tectonic transition and migra...There is a cross-cutting relationship between the E-W trending structures and the NE- trending structures in the northern Longmen-Micang Mountains region, which reflects possible regional tectonic transition and migration. Apatite fission track （AFT） analyses of 15 samples collected from this area yield apparent ages varying from 30.3±4.2 Ma to 111.7±9.0 Ma and confined-track-lengths ranging from 10.6±0.3 pm to 12.4±0.1 μm. Four specific groups were identified on the basis of the Track Age Spectrum Calculation （TASC） patterns, i.e., 143-112 Ma, 93.6-88 Ma, 42-40 Ma and -25.6 Ma. These age groups correspond to the spatial distributions of datasets and may represent four tectonic events. Together with the regional deformation patterns, the four age groups are interpreted to indicate tectonic superposition, transition and migration during the Meso-Cenozoic with the following possible order： （1） the Micang Mountains belt was dominated by the E-W trending structure during 143-112 Ma; （2） the contraction of the Longmen Mountains belt from the NW to the SE during 93.6-88 Ma led to the superposition of the NE-trending structures over the E-W trendinding structures; （3） dextral strike-slip shear dominated the Longmen Mountains belt at 42-40 Ma; （4） westward migration of the active tectonic belt occurred from 93.6-25.6 Ma in a break-back sequence in the northern Longmen Mountains belt. The Late Cenozoic tectonics in the northern Longmen Mountains belt are characterized by the dextral strike-slip shear and the occurrence of westward break-back sequence of deformations. As a result, north-south differences in deformations along the Longmen Mountains belt were intensified since the Miocene time and strains were mainly accumulated in the hinterland of the Longmen Mountains instead of being propagated to the foreland basin.展开更多
The Kuqa and the Southern Junggar foreland thrust belts, which lie to the southern and northern Tianshan, respectively, were formed under a strong compressional tectonic setting. Due to the differential propagation an...The Kuqa and the Southern Junggar foreland thrust belts, which lie to the southern and northern Tianshan, respectively, were formed under a strong compressional tectonic setting. Due to the differential propagation and deformation under the control of the décollement horizon, the structural deformation styles differ in the Kuqa and Southern Junggar thrust belts. Imbricated stacking is developed in the Kuqa thrust belt, forming a piggyback imbricated pattern of faulted anticline and fault-block structural assemblage dominated by salt structures. In contrast, wedge-shaped thrusts are developed in Southern Junggar, mainly forming vertical laminated patterns of multi-wedge-structure stacks strongly influenced by the décollement horizons. The different deformation patterns and structural styles of the north and south of Tian Shan control the contrasting characteristics of hydrocarbon accumulation in the foreland thrust belts of the Kuqa and the Southern Junggar thrust belts, including the variance in the hydrocarbon trap types, pathway systems and hydrocarbon-bearing horizons. Proven by the hydrocarbon accumulation research and exploration achievements, recent exploration targets should focus on sub-salt piggyback imbricated structural patterns in the Kuqa and the deep laminated patterns in the Southern Junggar thrust belt.展开更多
The Eastern Kunlun Mountains play an important role in the growth and eastward extrusion of the Tibetan Plateau. Tectonic and sedimentary study of the Cenozoic Qaidam Basin, especially the southern part, provides key ...The Eastern Kunlun Mountains play an important role in the growth and eastward extrusion of the Tibetan Plateau. Tectonic and sedimentary study of the Cenozoic Qaidam Basin, especially the southern part, provides key evidence for understanding their evolution. Here we present evidence including isopach maps, seismic sections and sedimentary analysis of single well to illustrate the sedimentary development of the basin and the structural features of its southern margin. The Qaidam Basin extended across Qiman Tagh-Eastern Kunlun Mountains in the early Cenozoic and withdrew northward at ca. 35.5 Ma, and then buckled as an EW striking elliptical depression since ca. 14.9 Ma, with the main depocenter migrating eastward. Our results support the view that the Kumukol and Hoh Xil basins joined the Qaidam Basin in the early Cenozoic time and we propose the Eastern Kunlun Mountains uplifted in the mid-Miocene.展开更多
文摘超薄磨耗层是公路预防性养护最有效的技术手段之一,热拌超薄磨耗层混合料由于生产施工温度较高,不仅会造成资源浪费,还会使混合料老化严重、性能下降。通过在高黏沥青中添加降黏剂可有效降低沥青高温条件下的黏度,从而降低拌和温度。研究表明,Sasobit、聚乙烯蜡和SZ能有效降低沥青的黏度,以1000 m Pa·s为基准黏度情况下能降低拌和温度约15℃,磨耗层混合料性能测试结果表明添加Sasobit和聚乙烯蜡可提升沥青混合料的高温稳定性,然而马歇尔稳定度、水稳定性和抗松散性能有所降低。而国产SZ降黏剂不仅能提升混合料的高温性能,还能提升马歇尔稳定度和抗水损害性能,是一种高性能降黏剂。
基金supported by the National Natural Science Foundation of China(Grant No.40702035)the National Science and Technology Special Project of China(Grant No.2011ZX05003-002)the Key Project of Petro China Company Limited(Grant No.2011B-0401)
文摘There is a cross-cutting relationship between the E-W trending structures and the NE- trending structures in the northern Longmen-Micang Mountains region, which reflects possible regional tectonic transition and migration. Apatite fission track （AFT） analyses of 15 samples collected from this area yield apparent ages varying from 30.3±4.2 Ma to 111.7±9.0 Ma and confined-track-lengths ranging from 10.6±0.3 pm to 12.4±0.1 μm. Four specific groups were identified on the basis of the Track Age Spectrum Calculation （TASC） patterns, i.e., 143-112 Ma, 93.6-88 Ma, 42-40 Ma and -25.6 Ma. These age groups correspond to the spatial distributions of datasets and may represent four tectonic events. Together with the regional deformation patterns, the four age groups are interpreted to indicate tectonic superposition, transition and migration during the Meso-Cenozoic with the following possible order： （1） the Micang Mountains belt was dominated by the E-W trending structure during 143-112 Ma; （2） the contraction of the Longmen Mountains belt from the NW to the SE during 93.6-88 Ma led to the superposition of the NE-trending structures over the E-W trendinding structures; （3） dextral strike-slip shear dominated the Longmen Mountains belt at 42-40 Ma; （4） westward migration of the active tectonic belt occurred from 93.6-25.6 Ma in a break-back sequence in the northern Longmen Mountains belt. The Late Cenozoic tectonics in the northern Longmen Mountains belt are characterized by the dextral strike-slip shear and the occurrence of westward break-back sequence of deformations. As a result, north-south differences in deformations along the Longmen Mountains belt were intensified since the Miocene time and strains were mainly accumulated in the hinterland of the Longmen Mountains instead of being propagated to the foreland basin.
基金financially supported by the National Key Projects of China(2011ZX05003)the 12th Five-year Program of Petrochina(2011B-04)the State Key Laboratory of EOR
文摘The Kuqa and the Southern Junggar foreland thrust belts, which lie to the southern and northern Tianshan, respectively, were formed under a strong compressional tectonic setting. Due to the differential propagation and deformation under the control of the décollement horizon, the structural deformation styles differ in the Kuqa and Southern Junggar thrust belts. Imbricated stacking is developed in the Kuqa thrust belt, forming a piggyback imbricated pattern of faulted anticline and fault-block structural assemblage dominated by salt structures. In contrast, wedge-shaped thrusts are developed in Southern Junggar, mainly forming vertical laminated patterns of multi-wedge-structure stacks strongly influenced by the décollement horizons. The different deformation patterns and structural styles of the north and south of Tian Shan control the contrasting characteristics of hydrocarbon accumulation in the foreland thrust belts of the Kuqa and the Southern Junggar thrust belts, including the variance in the hydrocarbon trap types, pathway systems and hydrocarbon-bearing horizons. Proven by the hydrocarbon accumulation research and exploration achievements, recent exploration targets should focus on sub-salt piggyback imbricated structural patterns in the Kuqa and the deep laminated patterns in the Southern Junggar thrust belt.
基金supported by Qinghai Oilfield Company,PetroChina(Grant No.2007-technology-exploration-14)National Key Scientific and Technological Projects(Grant No.2008ZX05003-001)
文摘The Eastern Kunlun Mountains play an important role in the growth and eastward extrusion of the Tibetan Plateau. Tectonic and sedimentary study of the Cenozoic Qaidam Basin, especially the southern part, provides key evidence for understanding their evolution. Here we present evidence including isopach maps, seismic sections and sedimentary analysis of single well to illustrate the sedimentary development of the basin and the structural features of its southern margin. The Qaidam Basin extended across Qiman Tagh-Eastern Kunlun Mountains in the early Cenozoic and withdrew northward at ca. 35.5 Ma, and then buckled as an EW striking elliptical depression since ca. 14.9 Ma, with the main depocenter migrating eastward. Our results support the view that the Kumukol and Hoh Xil basins joined the Qaidam Basin in the early Cenozoic time and we propose the Eastern Kunlun Mountains uplifted in the mid-Miocene.
