Extensive studies on rotor systems with single or coupled multiple faults have been carried out. However these studies are limited to single-span rotor systems. A finite element model for a complex rotor-bearing syste...Extensive studies on rotor systems with single or coupled multiple faults have been carried out. However these studies are limited to single-span rotor systems. A finite element model for a complex rotor-bearing system with coupled faults is presented. The dynamic responses of the rotor-bearing system are obtained by using the rotor dynamics theory and the modern nonlinear dynamics theory in connection with the continuation-shooting algorithm（commonly used for obtaining a periodic solution for a nonlinear system） for a range of rub-impact clearances and crack depths. The stability and Hopf instability of the periodic motion of the rotor-bearing system with coupled faults are analyzed by using the procedure described. The results indicate that the finite element method is an effective way for determining the dynamic responses of such complex rotor-bearing systems. Further for a rotor system with rub-impact and crack faults, the influences of the clearances are significantly different for different rub-impact stiffness. On the contrary, the influence of crack depths is rather small. The instability speeds of the rotor-bearing system increase due to the presence of the crack fault. The results obtained using the new finite element model, presented for computation and analysis of dynamic responses of the rotor-bearing systems with coupled faults, are in accordance with measurements in experiment. The formulations given can be used for diagnosis of faults, vibration control, and safe and stable operations of real rotor-bearing systems.展开更多
In the classical process for stability studies on the rotor-bearing system with crack faults, the simple discrete model is adopted for research on such problems, which neglect some needful dynamical influence factor, ...In the classical process for stability studies on the rotor-bearing system with crack faults, the simple discrete model is adopted for research on such problems, which neglect some needful dynamical influence factor, such as the material damping, shearing effect and gyroscopic effects, etc. Therefore, it is necessary to find a precise calculation model for simulation of the rotor-bearing system with cracks faults. In this paper, instead of the traditional simple discrete model, finite element （FE） model is adopted to investigate the motion stability of a nonlinear rotor system with crack fault. According to finite element theory, the FE model of the cracked rotor system is established firstly. It should be pointed out that the element where the crack occurs is modeled by a particular crack element and the supports at both ends are simulated by two nonlinear loads. Then, based on dimensionless and dimensionality reduction, the Newmark-[3 method and the shooting method are employed to study the effect of eccentricity and the depth of crack on instability speed and bifurcation feature. Furthermore, the simulation results are verified by some corresponding experiments. The simulation and experimental results show that instability speed does not change monotonically, but decreases firstly and then increases when the amount of eccentricity increases. Moreover, as the type of instability changes, the instability speed jumps concomitantly. Additionally, the presence of crack fault can disturb the oil whirl, as a result, instability speed tends to increase slightly, but it does not affect the type of instability and jumping phenomenon. This research presents an effective and convenient method which uses the finite element method （FEM） to research the motion stability of the nonlinear rotor-bearing system with cracked faults and other nonlinear force, and the proposed method can provide a theoretical reference for stability analysis and vibration control in more complex relevant rotor-bearing system.展开更多
The task of clustering Web sessions is to group Web sessions based on similarity and consists of maximizing the intra-group similarity while minimizing the inter-group similarity. The first and foremost question neede...The task of clustering Web sessions is to group Web sessions based on similarity and consists of maximizing the intra-group similarity while minimizing the inter-group similarity. The first and foremost question needed to be considered in clustering Web sessions is how to measure the similarity between Web sessions. However, there are many shortcomings in traditional measurements. This paper introduces a new method for measuring similarities between Web pages that takes into account not only the URL but also the viewing time of the visited Web page. Then we give a new method to measure the similarity of Web sessions using sequence alignment and the similarity of Web page access in detail Experiments have proved that our method is valid and efficient.展开更多
基金Supported by National Basic Research Program of China(973 Program,Grant No.2012CB026000)
文摘Extensive studies on rotor systems with single or coupled multiple faults have been carried out. However these studies are limited to single-span rotor systems. A finite element model for a complex rotor-bearing system with coupled faults is presented. The dynamic responses of the rotor-bearing system are obtained by using the rotor dynamics theory and the modern nonlinear dynamics theory in connection with the continuation-shooting algorithm（commonly used for obtaining a periodic solution for a nonlinear system） for a range of rub-impact clearances and crack depths. The stability and Hopf instability of the periodic motion of the rotor-bearing system with coupled faults are analyzed by using the procedure described. The results indicate that the finite element method is an effective way for determining the dynamic responses of such complex rotor-bearing systems. Further for a rotor system with rub-impact and crack faults, the influences of the clearances are significantly different for different rub-impact stiffness. On the contrary, the influence of crack depths is rather small. The instability speeds of the rotor-bearing system increase due to the presence of the crack fault. The results obtained using the new finite element model, presented for computation and analysis of dynamic responses of the rotor-bearing systems with coupled faults, are in accordance with measurements in experiment. The formulations given can be used for diagnosis of faults, vibration control, and safe and stable operations of real rotor-bearing systems.
基金supported by National Natural Science Foundation of China(Grant No.51105063)Fundamental Research Funds for the Central Universities of China(Grant Nos.N120403004,N100303001)
文摘In the classical process for stability studies on the rotor-bearing system with crack faults, the simple discrete model is adopted for research on such problems, which neglect some needful dynamical influence factor, such as the material damping, shearing effect and gyroscopic effects, etc. Therefore, it is necessary to find a precise calculation model for simulation of the rotor-bearing system with cracks faults. In this paper, instead of the traditional simple discrete model, finite element （FE） model is adopted to investigate the motion stability of a nonlinear rotor system with crack fault. According to finite element theory, the FE model of the cracked rotor system is established firstly. It should be pointed out that the element where the crack occurs is modeled by a particular crack element and the supports at both ends are simulated by two nonlinear loads. Then, based on dimensionless and dimensionality reduction, the Newmark-[3 method and the shooting method are employed to study the effect of eccentricity and the depth of crack on instability speed and bifurcation feature. Furthermore, the simulation results are verified by some corresponding experiments. The simulation and experimental results show that instability speed does not change monotonically, but decreases firstly and then increases when the amount of eccentricity increases. Moreover, as the type of instability changes, the instability speed jumps concomitantly. Additionally, the presence of crack fault can disturb the oil whirl, as a result, instability speed tends to increase slightly, but it does not affect the type of instability and jumping phenomenon. This research presents an effective and convenient method which uses the finite element method （FEM） to research the motion stability of the nonlinear rotor-bearing system with cracked faults and other nonlinear force, and the proposed method can provide a theoretical reference for stability analysis and vibration control in more complex relevant rotor-bearing system.
基金Supported by the Foundation of Hubei Key Technology Research and Development(2005AA101C18)the Natural Science Founda-tion of South-Central University for Nationalities(YZY06009)
文摘The task of clustering Web sessions is to group Web sessions based on similarity and consists of maximizing the intra-group similarity while minimizing the inter-group similarity. The first and foremost question needed to be considered in clustering Web sessions is how to measure the similarity between Web sessions. However, there are many shortcomings in traditional measurements. This paper introduces a new method for measuring similarities between Web pages that takes into account not only the URL but also the viewing time of the visited Web page. Then we give a new method to measure the similarity of Web sessions using sequence alignment and the similarity of Web page access in detail Experiments have proved that our method is valid and efficient.
