The failure of slope is a progressive process, and the whole sliding surface is caused by the gradual softening of soil strength of the potential sliding surface. From this viewpoint, a local dynamic strength reductio...The failure of slope is a progressive process, and the whole sliding surface is caused by the gradual softening of soil strength of the potential sliding surface. From this viewpoint, a local dynamic strength reduction method is proposed to capture the progressive failure of slope. This method can calculate the warning deformation of landslide in this study. Only strength parameters of the yielded zone of landslide will be reduced by using the method. Through continuous local reduction of the strength parameters of the yielded zone, the potential sliding surface developed gradually and evolved to breakthrough finally. The result shows that the proposed method can simulate the progressive failure of slope truly. The yielded zone and deformation of landslide obtained by the method are smaller than those of overall strength reduction method. The warning deformation of landslide can be obtained by using the local dynamic strength reduction method which is based on the softening characteristics of the sliding surface.展开更多
As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accu...As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accurately identify crack initiation stress level by proper method. In this study, confined compression tests of sandstone samples are used to examine the validity/applicability of proposed axial strain stiffness method. The results show that by highlighting the minuscule changes in stress-strain curve, the axial strain stiffness curve provided further insight into rock failure process and revealed five stages:(a) irregular fluctuation,(b) nearly horizontal regular fluctuation,(c) irregular fluctuation gradually decreasing to zero,(d) extreme fluctuation, and(e) near zero, which mainly correspond to five stages of stress–strain curve. The ratio of crack-initiation stress to peak strength determined using this approach is 0.44–0.51, similar to the ranges previously reported by other researchers. In this method, the key is to accurately detect the end point of the stage(b), "nearly horizontal regular fluctuation" characterized by a sudden change in axial strain stiffness curve, and the sudden change signifies crack initiation in rock sample. Finally, the research indicates that the axial strain stiffness curve can provide a mean to identify the crack-initiation stress thresholds in brittle rocks.展开更多
High geothermal temperatures appear to be unfavorable for the construction of tunnels in slate rocks with high overburden. To investigate the mechanical characteristics of slates at various levels of geothermal temper...High geothermal temperatures appear to be unfavorable for the construction of tunnels in slate rocks with high overburden. To investigate the mechanical characteristics of slates at various levels of geothermal temperature, conventional triaxial compression tests at different levels of confining stress were carried out at 4 different temperatures from 20℃ to 120℃. The obtained results show high confining pressures weaken the thermal effects on rock mechanical characteristics while higher temperatures enhance the effect of confining pressure.At higher levels of confining stress the thermal effects on the rock strength characteristics decrease. The higher the temperature, the larger is the effect of confining pressure on the mechanical characteristics of the slate. Increase of temperature leads to a decrease of the peak strength but increases the deformability and ductility of the slate, the thermo effect on the peak strength and Poisson's ratio is larger than on the elastic modulus. Higher temperatures reduce the shear strength of slate, the decrease is mainly caused by a decrease of the cohesion. In general, the slate samples fail in shear failure.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.41002110,41272330and41130745)the research fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No.SKLGP2012Z003)supported by the funding of Science and Technology Office of Sichuan Province(Grant No.2012JY0110)
文摘The failure of slope is a progressive process, and the whole sliding surface is caused by the gradual softening of soil strength of the potential sliding surface. From this viewpoint, a local dynamic strength reduction method is proposed to capture the progressive failure of slope. This method can calculate the warning deformation of landslide in this study. Only strength parameters of the yielded zone of landslide will be reduced by using the method. Through continuous local reduction of the strength parameters of the yielded zone, the potential sliding surface developed gradually and evolved to breakthrough finally. The result shows that the proposed method can simulate the progressive failure of slope truly. The yielded zone and deformation of landslide obtained by the method are smaller than those of overall strength reduction method. The warning deformation of landslide can be obtained by using the local dynamic strength reduction method which is based on the softening characteristics of the sliding surface.
基金supported by the National Natural Science Foundation of China(Grants No.41772329,41572283 and 41230635)the funding of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Nos.SKLGP2017Z001 and SKLGP2013Z004)supported by the Funding of Science and Technology Office of Sichuan Province(Grants No.2015JQ0020 and 2017TD0018)
文摘As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accurately identify crack initiation stress level by proper method. In this study, confined compression tests of sandstone samples are used to examine the validity/applicability of proposed axial strain stiffness method. The results show that by highlighting the minuscule changes in stress-strain curve, the axial strain stiffness curve provided further insight into rock failure process and revealed five stages:(a) irregular fluctuation,(b) nearly horizontal regular fluctuation,(c) irregular fluctuation gradually decreasing to zero,(d) extreme fluctuation, and(e) near zero, which mainly correspond to five stages of stress–strain curve. The ratio of crack-initiation stress to peak strength determined using this approach is 0.44–0.51, similar to the ranges previously reported by other researchers. In this method, the key is to accurately detect the end point of the stage(b), "nearly horizontal regular fluctuation" characterized by a sudden change in axial strain stiffness curve, and the sudden change signifies crack initiation in rock sample. Finally, the research indicates that the axial strain stiffness curve can provide a mean to identify the crack-initiation stress thresholds in brittle rocks.
基金supported by National Natural Science Foundation of China(Grant No.41230635)Projects of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No.SKLGP2013Z004)+1 种基金The Cultivating programme of middle-aged backbone teachers of Chengdu University of Technology(Grant No.JXGG201703)Key Projects of Education Department of Sichuan Province(Grant No.16ZA0095)
文摘High geothermal temperatures appear to be unfavorable for the construction of tunnels in slate rocks with high overburden. To investigate the mechanical characteristics of slates at various levels of geothermal temperature, conventional triaxial compression tests at different levels of confining stress were carried out at 4 different temperatures from 20℃ to 120℃. The obtained results show high confining pressures weaken the thermal effects on rock mechanical characteristics while higher temperatures enhance the effect of confining pressure.At higher levels of confining stress the thermal effects on the rock strength characteristics decrease. The higher the temperature, the larger is the effect of confining pressure on the mechanical characteristics of the slate. Increase of temperature leads to a decrease of the peak strength but increases the deformability and ductility of the slate, the thermo effect on the peak strength and Poisson's ratio is larger than on the elastic modulus. Higher temperatures reduce the shear strength of slate, the decrease is mainly caused by a decrease of the cohesion. In general, the slate samples fail in shear failure.
