This work presents an electrochemical extraction of cerium and synthesization of Al–Ce alloy in LiCl–KCl melts on Mo and Al electrodes by chlorination of CeO2 using AlCl3 at 873 K. The cyclic voltammogram on Mo elec...This work presents an electrochemical extraction of cerium and synthesization of Al–Ce alloy in LiCl–KCl melts on Mo and Al electrodes by chlorination of CeO2 using AlCl3 at 873 K. The cyclic voltammogram on Mo electrodes in LiCl–KCl–CeO2 melt showed no obvious reduction wave other than the reduction of Li(I). After the addition of AlCl3, the signals of the reaction of Ce(ⅡI)/Ce(0) and the synthesization of Al–Ce and Al–Li alloys were investigated by cyclic voltammetry, square-wave voltammetry, open-circuit chronopotentiometry and chronopotentiometry. These results indicated that AlCl3 can chloridize CeO2 and that it is possible to extract cerium and form Al–Ce and Al–Li–Ce alloys in LiCl–KCl–CeO2–AlCl3 melts. According to potentiostatic electrolysis, only the Al4 Ce layer coated the Al electrodes. According to galvanostatic electrolysis, Al–Ce(Al4Ce, Al3 Ce, and Al92Ce8), Al2Li3, and Al phases were formed on Mo electrodes, and the content of cerium in the Al–Li–Ce alloys was more than 17 wt%.展开更多
The electrochemical properties of CeCl3, dissolved in LiCI-KCI eutectic melt, were investigated by electrochemical techniques, such as cyclic voltammetry and square wave voltammetry on Mo electrode. It was shown that...The electrochemical properties of CeCl3, dissolved in LiCI-KCI eutectic melt, were investigated by electrochemical techniques, such as cyclic voltammetry and square wave voltammetry on Mo electrode. It was shown that Ce（Ⅲ） is reduced to Ce（0） based on a three-step mechanism. In a temperature range of 833-923 K, the diffusion coefficient of Ce（Ⅲ） is lgDceoH）=-2.49-1704/T determined by means of the Berzins-Delahay equation with two different expressions under reversible and irreversible conditions. The apparent standard potential of a Ce（Ⅲ）/Ce（0） redox system is ECE^3＋0^＊/Ce^0 =3.551＋0.0006132T（K） vs. Cl2/Cl^-. Some thermochemical properties of CeCl3 solutions were also derived from the electrochemical measurements, such as the enthalpy, entropy, Gibbs free energies and the activity coefficients of Ce（Ⅲ）. The Gibbs free energy of a dilute solution of CeCl3 in this system was determined to be △G^0CeCl3/（kJ·mol^-1）=-1027.9＋0.178T（K） And the activity coefficients, γCeCl3 , range between （7.78-9.14）×10^-3. Furthermore, the standard rate constant of kinetic reaction was calculated to be （4.94-9.72）× 10^-3 cmZ/s and the reaction was regarded as a quasi-reversible reaction under the present experimental conditions at 833 K.展开更多
基金supported by the High Technology Research and Development Program of China(2011AA03A409)the National Natural Science Foundation of China(51104050,91326113,21271054,21173060)+6 种基金the Natural Science Foundation of Heilongjiang Province(E201413)China Postdoctoral Science Foundation(20110491029)the HeilongJiang Postdoctoral Fund(LBH-Z10208)the Heilongjiang Educational Commission Foundation(12513045)the Fundamental Research Funds for the Central Universities(HEUCFD1415)the Scientific Technology Bureau of Harbin(2012RFQXS102)the Basic Research Foundation of Harbin Engineering University(HEUFT08031)
文摘This work presents an electrochemical extraction of cerium and synthesization of Al–Ce alloy in LiCl–KCl melts on Mo and Al electrodes by chlorination of CeO2 using AlCl3 at 873 K. The cyclic voltammogram on Mo electrodes in LiCl–KCl–CeO2 melt showed no obvious reduction wave other than the reduction of Li(I). After the addition of AlCl3, the signals of the reaction of Ce(ⅡI)/Ce(0) and the synthesization of Al–Ce and Al–Li alloys were investigated by cyclic voltammetry, square-wave voltammetry, open-circuit chronopotentiometry and chronopotentiometry. These results indicated that AlCl3 can chloridize CeO2 and that it is possible to extract cerium and form Al–Ce and Al–Li–Ce alloys in LiCl–KCl–CeO2–AlCl3 melts. According to potentiostatic electrolysis, only the Al4 Ce layer coated the Al electrodes. According to galvanostatic electrolysis, Al–Ce(Al4Ce, Al3 Ce, and Al92Ce8), Al2Li3, and Al phases were formed on Mo electrodes, and the content of cerium in the Al–Li–Ce alloys was more than 17 wt%.
基金Supported by the High Technology Research and Development Program of China（No.2011AA03A409）, the National Natural Science Foundation of China（Nos.51104050, 91326113, 21271054, 21173060）, the China Postdoctoral Science Foundation（No.20110491029）, the Heilongjiang Postdoctoral Fund, China（No.LBH-Z10208）, the Heilongjiang Educational Commission Foundation, China（No.12513045）, the Fundamental Research Funds for the Central Universities, China（No.HEUCF141502）, the Project of the Scientific Technology Bureau of Harbin, China（No.2012RFQXS 102） and the Basic Research Foundation of Harbin Engineering University, China（No.HEUFT08031）.
文摘The electrochemical properties of CeCl3, dissolved in LiCI-KCI eutectic melt, were investigated by electrochemical techniques, such as cyclic voltammetry and square wave voltammetry on Mo electrode. It was shown that Ce（Ⅲ） is reduced to Ce（0） based on a three-step mechanism. In a temperature range of 833-923 K, the diffusion coefficient of Ce（Ⅲ） is lgDceoH）=-2.49-1704/T determined by means of the Berzins-Delahay equation with two different expressions under reversible and irreversible conditions. The apparent standard potential of a Ce（Ⅲ）/Ce（0） redox system is ECE^3＋0^＊/Ce^0 =3.551＋0.0006132T（K） vs. Cl2/Cl^-. Some thermochemical properties of CeCl3 solutions were also derived from the electrochemical measurements, such as the enthalpy, entropy, Gibbs free energies and the activity coefficients of Ce（Ⅲ）. The Gibbs free energy of a dilute solution of CeCl3 in this system was determined to be △G^0CeCl3/（kJ·mol^-1）=-1027.9＋0.178T（K） And the activity coefficients, γCeCl3 , range between （7.78-9.14）×10^-3. Furthermore, the standard rate constant of kinetic reaction was calculated to be （4.94-9.72）× 10^-3 cmZ/s and the reaction was regarded as a quasi-reversible reaction under the present experimental conditions at 833 K.
