The temperature effects on the photoluminescence(PL) properties of porous silicon(PS) have been observed in the early stage. However, the obtained results are different. Through repeated experiments, some different an...The temperature effects on the photoluminescence(PL) properties of porous silicon(PS) have been observed in the early stage. However, the obtained results are different. Through repeated experiments, some different and useful information are got, which benefits us in that PL properties of porous silicon can be fully made use of. Firstly, samples with porosity of 76% and 49% were chosen to study the exciting temperature effects on the PL spectrum. For the samples with low porosity, the decreasing temperature causes the peak wavelength to be red-shifting and that of the samples with high porosity to present the blue-shifting trend. The light intensity of both reaches the maximum at -10℃. These experimental results can be well explained with the synthesized center PL model based on the quantum confinement model, other than the PL efficiency function σ(λ). Thereafter, PL properties of PS samples fabricated separately under the temperature of -10℃, 0℃, 10℃, 20℃ and 30℃ were studied. The results indicate that with the decrease of the etching temperature, the PL intensity increases from 406.7 to 716.6 and the peak wavelength blue-shifts from 698.9nm to 671.8nm. The WHFM of the PL spectrum dramatically narrows. At the same time, the images observed by AFM show that with the decreasing temperature, the holes are becoming deeper and the porosity is higher, which suggests that the decreasing temperature accelerates the etching rate.展开更多
Using transfer matrix method, the optical transmission properties in one-dimensional （l-D） photonic crystal is analyzed, When the temperature varies, not only the refractive index of the optical medium is changed be...Using transfer matrix method, the optical transmission properties in one-dimensional （l-D） photonic crystal is analyzed, When the temperature varies, not only the refractive index of the optical medium is changed because of the thermo-optical effect, but also the thickness of the optical medium is changed due to the thermal-expansion effect. Thus, the structure of 1/4 wave-plate stack in original photonic crystal is destroyed and the band structure varies. In this work, the effects of the temperature variation on the first and second band gap in a I-D photonic crystal are analyzed in detail. It is found that the changes of the starting wavelength, the cut-off wavelength and the forbidden band width depend linearly on the temperature.展开更多
When the organic vapors absorbed to the surface of porous silicon(PS), capillary condensation takes place due to the porous structure of the PS layer, accordingly resulting in the effective refractive index changing. ...When the organic vapors absorbed to the surface of porous silicon(PS), capillary condensation takes place due to the porous structure of the PS layer, accordingly resulting in the effective refractive index changing. For PS multi-layer microcavities, the different resonant peaks shift in the reflectivity spectrum of porous silicon microcavities(PSMs). The optical sensing model is set up by applying Bruggeman effective medium approximation theory, capillary condensation process and transfer matrix theoretically analytical method of one-dimensional photonic crystals. At the same time, comprehensively researched on are the sensing characteristics of PSMs which are exposed to give concentration organic vapors. At last, made is the theoretical simulation for sensing model of the PSMs in case of saturation by using computer numerical calculation, and found is the linearity relation between the refractive index of organic solvent and the peak-shift. At the same time deduced is the peak-shift as a function of the concentration of ethanol vapors.展开更多
文摘The temperature effects on the photoluminescence(PL) properties of porous silicon(PS) have been observed in the early stage. However, the obtained results are different. Through repeated experiments, some different and useful information are got, which benefits us in that PL properties of porous silicon can be fully made use of. Firstly, samples with porosity of 76% and 49% were chosen to study the exciting temperature effects on the PL spectrum. For the samples with low porosity, the decreasing temperature causes the peak wavelength to be red-shifting and that of the samples with high porosity to present the blue-shifting trend. The light intensity of both reaches the maximum at -10℃. These experimental results can be well explained with the synthesized center PL model based on the quantum confinement model, other than the PL efficiency function σ(λ). Thereafter, PL properties of PS samples fabricated separately under the temperature of -10℃, 0℃, 10℃, 20℃ and 30℃ were studied. The results indicate that with the decrease of the etching temperature, the PL intensity increases from 406.7 to 716.6 and the peak wavelength blue-shifts from 698.9nm to 671.8nm. The WHFM of the PL spectrum dramatically narrows. At the same time, the images observed by AFM show that with the decreasing temperature, the holes are becoming deeper and the porosity is higher, which suggests that the decreasing temperature accelerates the etching rate.
文摘Using transfer matrix method, the optical transmission properties in one-dimensional （l-D） photonic crystal is analyzed, When the temperature varies, not only the refractive index of the optical medium is changed because of the thermo-optical effect, but also the thickness of the optical medium is changed due to the thermal-expansion effect. Thus, the structure of 1/4 wave-plate stack in original photonic crystal is destroyed and the band structure varies. In this work, the effects of the temperature variation on the first and second band gap in a I-D photonic crystal are analyzed in detail. It is found that the changes of the starting wavelength, the cut-off wavelength and the forbidden band width depend linearly on the temperature.
文摘When the organic vapors absorbed to the surface of porous silicon(PS), capillary condensation takes place due to the porous structure of the PS layer, accordingly resulting in the effective refractive index changing. For PS multi-layer microcavities, the different resonant peaks shift in the reflectivity spectrum of porous silicon microcavities(PSMs). The optical sensing model is set up by applying Bruggeman effective medium approximation theory, capillary condensation process and transfer matrix theoretically analytical method of one-dimensional photonic crystals. At the same time, comprehensively researched on are the sensing characteristics of PSMs which are exposed to give concentration organic vapors. At last, made is the theoretical simulation for sensing model of the PSMs in case of saturation by using computer numerical calculation, and found is the linearity relation between the refractive index of organic solvent and the peak-shift. At the same time deduced is the peak-shift as a function of the concentration of ethanol vapors.
