Study of Distal Pyroclastic-flow Stratum from Tianchi Volcano in 1215(±15) Eruption:Pyroclastic-flow Over Water

In this paper, we describe three strata at the distal part of the pyroclastic-flow from the Tianchi volcano in 1215 （±15） eruption. One of the strata with crosslayers that are different from typical pyroclastic-flow strata may come from a ground-surge. The grain-size and scanning electron microscopy （SEM） analysis was performed to study the origin of the pyroclastic-flow. Characteristics of grain-size distribution show that it is similar with the ash cloud. Through the SEM analyses, we found some quench structures with less damage on the surfaces of the vitric pumices. These phenomena indicate that there has been hydration in the transportation processes at the distal of pyroclastic-flow. It has partly changed the transportation mechanism of pyroclastic-flow, which transitions form dense flow to diluted flow. This paper develops a new distal pyroclastic-flow model in the Tianchi volcano that can be divided into three stages, i.e. the quench stage, expanding stage and depositing stage.

Magmatic Processes of Ashi Volcano, Western Kunlun Mountains, China

The Ashikule volcanic cluster （AVC） in western Kunlun Mountains is located in a graben region at the convergence of the Altun and Kangxiwa fault zones,and consists of more than 10 main volcanoes and dozens of volcanelloes.The Ashi volcano lies in the central part of the volcanic cluster.The lithology,chemical composition and texture of Ashi volcanic rocks were studied in detail,and their implication in magmatic processes was discussed.The phenocrysts in Ashi volcanic rocks consist mainly of plagioclase and pyroxene,and the statistical results of phenocryst contents show that the rocks can be subdivided into two groups.In group A,the content of pyroxene phenocrysts is generally higher than that of plagioclase phenocrysts,but an inverse relation occurs in group B.In TAS diagram,the compositions of both groups fall into the trachyandensite field,but they are obviously concentrated into two clusters.The two clusters exist also in the oxide diagrams.The pyroxene phenocrysts comprise augite,bronzite and hypersthene,and their Mg# histogram shows two peaks.Plagioclase phenocrysts with reaction rim are observed in rocks of both groups.The An values of the core are generally 30-40,and those of the rim are 44-48,which are closer to those of euhedral plagioclases.The bronzites are in equilibrium with the melt,and two sets of magma depths,i.e.,18-25 km and 13-18 km,can be estimated by using thermobarometer proposed by Putirka.The hypersthenes are not in equilibrium with the melt,and can be assigned to xenocrysts.The crystal size distribution （CSD） curves of plagioclase appear as kinked lines indicative of magma mixing.The above analyses show that two magma pockets might exist beneath the Ashi volcano.It is likely that they are connected with each other.The one has more evolved and contains more acidic magma,and the other is a trachyandensite magma pocket characterized by layering.The magma from the upper part of the trachyandensite magma pocket might mix with more acidic magma,resulting in a magma that is more acidic than the magma from the lower part.

分析变量差异方法在发动机冷试中的应用研究

介绍了德国戴姆勒公司创建的分析变量差异问题解决方法,利用简单的逻辑策略及数据统计,快速地分离出对问题影响最大的原因。通过对比状态不同的问题零件,利用统计的方法排除其次要原因并验证其根本原因。详细介绍了分析变量差异方法的六大步骤和分析思路。基于发动机整机装配测试工艺,结合冷试案例对分析变量差异应用进行介绍,同时将该方法进行归纳总结。

Features and genesis of micro-nanometer-sized grains on shear slip surface of the 2008 Wenchuan earthquake

In coseismic surface rupture zones caused by the 2008 Mw 7.9 Wenchuan earthquake, some thin-layered fault gouges with strong deformation were observed in different locations. In this paper, fault gouge samples were taken as research objects from the Bajiaomiao village in the south-west segment of the principal rupture and the Heshangping village and the Shaba village in the north-east segment of the principal rupture where larger displacements were measured. Fabric characteristics of the fault gouge samples and the morphologies and structures of micro-nanometer grains on Y-shear surfaces were then analyzed by using a stereoscope and SEM. Observation results showed that obvious Y- and R-shears and obvious scratches were well developed in coseismic gouges caused by the 2008 Wenchuan earthquake. Micro-nanometer grains in the fault gouge of the Wenhcuan earthquake were formed mainly due to breaking, grinding, and powdering of fault slipping friction surface. Heat caused by fault slipping(maybe also including heat caused by thermal decomposition) played an important role in producing micro-nanometer sized grains. Existence occurrence state of micro-nanometer sized grains on fault slip surface includes singled grains and their complexes with shapes of ball, silkworm, pancake and mass. The structures mainly include dispersed and close-packed structures besides a few of striped and layered structures. All these structures were formed at the extreme unbalance conditions caused by rapid deforming during an earthquake. There always exist some voids between structures due to loosely contact. Only alienated grains are included in the stripped structure. But there are some singled grains with no deformation in dispersed and close-packed structures besides complexes of grains with morphologies of ball, silkworm, pancake and mass. The striped and close-packed structures are the results of plastic deformation, and the dispersed and layered structures are the results of brittle deformation whereas loose contact of different structures was caused mainly by discontinuous dynamic friction(fault stick-slipping). The structures of the micro-nanometer sized grains in coseismic fault gouge caused by the Wenchuan earthquake are the geological records of seismic fault slipping(it is not pseudotachylite), which could be used as an index of paleo-seismic events.

Rheology of the lower crust beneath the northern part of North China: Inferences from lower crustal xenoliths from Hannuoba basalts, Hebei Province, China

Lower crustal xenoliths brought up rapidly by basaltic magma onto the earth surface may provide di-rect information on the lower crust. The main purpose of this research is to gain an insight into the rheology of the lower crust through the detailed study of lower crustal xenoliths collected from the Hannuoba basalt, North China. The lower crustal xenoliths in this area consist mainly of two pyroxene granulite, garnet granulite, and light-colored granulite, with a few exception of felsic granulite. The equilibration temperature and pressure of these xenoliths are estimated by using geothermometers and geobarometers suitable for lower crustal xenoliths. The obtained results show that the equilibration temperature of these xenoliths is within the range of 785―900℃, and the equilibrium pressure is within the range of 0.8―1.2 GPa, corresponding to a depth range of 28―42 km. These results have been used to modify the previously constructed lower crust-upper mantle geotherm for the studied area. The dif-ferential stress during the deformation process of the lower crustal xenoliths is estimated by using recrystallized grain-size paleo-piezometer to be in the range of 14―20 MPa. Comparing the available steady state flow laws for lower crustal rocks, it is confirmed that the flow law proposed by Wilks et al. in 1990 is applicable to the lower crustal xenoliths studied in this paper. The strain rate of the lower crust estimated by using this flow law is within the range of 10-13―10-11 s-1, higher than the strain rate of the upper mantle estimated previously for the studied area (10-17―10-13 s-1); the equivalent viscosity is estimated to be within the range of 1017―1019Pa·s, lower than that of the upper mantle (1019―1021 Pa·s). The constructed rheological profiles of the lower crust indicate that the differential stress shows no significant linear relation with depth, while the strain rate increases with depth and equivalent vis-cosity decrease with depth. The results support the viewpoint of weak lower continental crust.