Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved s...Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.展开更多
TiN films deposited by the VCAD method at the substrate of stainless steel and superhigh speed tool steels are uniform and dense.Their colour,orientation and lattice parameter depend on deposited condition The lattice...TiN films deposited by the VCAD method at the substrate of stainless steel and superhigh speed tool steels are uniform and dense.Their colour,orientation and lattice parameter depend on deposited condition The lattice structure of deposited film,the change of the lattice parameter and its preferred orientation were studied by the XRD method,different behaviours of TiNx film were analysed.The lattice parameter of TiNx films is increased with the nitrogen content and The colour of TiNx film is strongly related to the content of Nitrogen also.The change of preferred orientation depends mainly on the Bias.展开更多
The general temporal-spatial consistency for the formation of adakitic rocks and lithospheric thinning in northern China provide a window to examine the processes and mechanism for the destruction of the North China C...The general temporal-spatial consistency for the formation of adakitic rocks and lithospheric thinning in northern China provide a window to examine the processes and mechanism for the destruction of the North China Craton.With experimental petrology data,this paper demonstrates that the adakitic rocks in northern China are the products of partial melting of middle-to high-potassic metabasalts at the base of the lower continent crust.Based on the TiO2 solubility model,many adakitic rocks in Dabie,Jiaodong and the northern part of the craton appear to have been saturated with TiO2.This indicates the presence of a Ti-rich accessory phase in their source regions.This phase must be rutile based on the decreasing Nb/La with increasing La/Yb in the adakitic rocks.The adakitic magmas were,thus,derived from a depth of more than 50 km,based on pressures (higher than 1.5 GPa) for the stability of rutile in a metabasalt system.Because present-day crustal thickness is generally only 35 km,we suggest that the destruction of the North China Craton may have led to at least 15 km of thinning or delamination of the crust.展开更多
基金funded by the Key Project of NSFC-Guangdong Province Joint Program(Grant No.U2001204)the National Natural Science Foundation of China(Grant Nos.61873290 and 61972431)+1 种基金the Science and Technology Program of Guangzhou,China(Grant No.202002030470)the Funding Project of Featured Major of Guangzhou Xinhua University(2021TZ002).
文摘Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.
文摘TiN films deposited by the VCAD method at the substrate of stainless steel and superhigh speed tool steels are uniform and dense.Their colour,orientation and lattice parameter depend on deposited condition The lattice structure of deposited film,the change of the lattice parameter and its preferred orientation were studied by the XRD method,different behaviours of TiNx film were analysed.The lattice parameter of TiNx films is increased with the nitrogen content and The colour of TiNx film is strongly related to the content of Nitrogen also.The change of preferred orientation depends mainly on the Bias.
基金was supported jointly by National Natural Science Foundation of China (Grant Nos. 90714011 and 40825010)the NBRP of China (Grant No. 2007CB411303)Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (Grant No. IS-1285)
文摘The general temporal-spatial consistency for the formation of adakitic rocks and lithospheric thinning in northern China provide a window to examine the processes and mechanism for the destruction of the North China Craton.With experimental petrology data,this paper demonstrates that the adakitic rocks in northern China are the products of partial melting of middle-to high-potassic metabasalts at the base of the lower continent crust.Based on the TiO2 solubility model,many adakitic rocks in Dabie,Jiaodong and the northern part of the craton appear to have been saturated with TiO2.This indicates the presence of a Ti-rich accessory phase in their source regions.This phase must be rutile based on the decreasing Nb/La with increasing La/Yb in the adakitic rocks.The adakitic magmas were,thus,derived from a depth of more than 50 km,based on pressures (higher than 1.5 GPa) for the stability of rutile in a metabasalt system.Because present-day crustal thickness is generally only 35 km,we suggest that the destruction of the North China Craton may have led to at least 15 km of thinning or delamination of the crust.