Low grade dumped limestone sample having high silica of 8.1%, 36.8% CaO, and 3% Al2O3 has been studied with the aim to reduce the silica level to below 3% for its utilization in iron making. Beneficiation study of the...Low grade dumped limestone sample having high silica of 8.1%, 36.8% CaO, and 3% Al2O3 has been studied with the aim to reduce the silica level to below 3% for its utilization in iron making. Beneficiation study of the sample was initiated with desliming of the feed sample of -100 μm to remove the siliceous ultrafine particles and to improve the feed quality. Flotation study was carried out by column flotation technique varying the collector dosage, superficial air flow velocity and froth depth to assess their effect on silica reduction and CaO recovery. It was observed that increased collector dosage and superficial air velocity increases the recovery of CaO, and increase in the froth depth reduces the mass flow and silica content in the concentrate. The best result was found at 1.25 cm/sec superficial air velocity, 25 cm froth depth, 1.25 kgpt collector dosage and concentrate assayed 47.3% CaO, 2.8% silica with 72% CaO recovery.展开更多
Coal is primarily beneficiated by wet gravity methods. The wet processing of coal is an efficient practice. However, it introduces the moisture in the range of 6%-15%, depending upon the size of coal which is as detri...Coal is primarily beneficiated by wet gravity methods. The wet processing of coal is an efficient practice. However, it introduces the moisture in the range of 6%-15%, depending upon the size of coal which is as detrimental as ash content to the heating value of coal. Dry beneficiation of coal fines was carried out using an air fluidized vibrating table in which the coal particles get separated from the heavier mineral particles as a result of horizontal and vertical stratification. Two level factorial design matrix was used to optimize and assess the interactive effects of the operational parameters of a pneumatic table viz. deck eccentric, side tilt and air flow rate on the clean coal yield and its ash content. Double stage processing was found to be more effective for reducing the ash content of the clean coal. Initial stage of processing at a higher ash level generates a reject of high ash with low combustibles. Cleaning of the rougher concentrate at 34%-35% ash level shows significant improvement in the organic efficiency （88.6%） and useful heat value of clean coal （15690 kJ/kg）. The performance of air fluidized vibrating deck was measured by Ep value which is 0.18.展开更多
文摘Low grade dumped limestone sample having high silica of 8.1%, 36.8% CaO, and 3% Al2O3 has been studied with the aim to reduce the silica level to below 3% for its utilization in iron making. Beneficiation study of the sample was initiated with desliming of the feed sample of -100 μm to remove the siliceous ultrafine particles and to improve the feed quality. Flotation study was carried out by column flotation technique varying the collector dosage, superficial air flow velocity and froth depth to assess their effect on silica reduction and CaO recovery. It was observed that increased collector dosage and superficial air velocity increases the recovery of CaO, and increase in the froth depth reduces the mass flow and silica content in the concentrate. The best result was found at 1.25 cm/sec superficial air velocity, 25 cm froth depth, 1.25 kgpt collector dosage and concentrate assayed 47.3% CaO, 2.8% silica with 72% CaO recovery.
文摘Coal is primarily beneficiated by wet gravity methods. The wet processing of coal is an efficient practice. However, it introduces the moisture in the range of 6%-15%, depending upon the size of coal which is as detrimental as ash content to the heating value of coal. Dry beneficiation of coal fines was carried out using an air fluidized vibrating table in which the coal particles get separated from the heavier mineral particles as a result of horizontal and vertical stratification. Two level factorial design matrix was used to optimize and assess the interactive effects of the operational parameters of a pneumatic table viz. deck eccentric, side tilt and air flow rate on the clean coal yield and its ash content. Double stage processing was found to be more effective for reducing the ash content of the clean coal. Initial stage of processing at a higher ash level generates a reject of high ash with low combustibles. Cleaning of the rougher concentrate at 34%-35% ash level shows significant improvement in the organic efficiency （88.6%） and useful heat value of clean coal （15690 kJ/kg）. The performance of air fluidized vibrating deck was measured by Ep value which is 0.18.
