Antiviral Oral Liquid(AOL)is an adult medicine in the Chinese Pharmacopoeia used to treat upper respiratory infections such as influenza.It has shown promising clinical efficacy in relieving flu-like symptoms such as ...Antiviral Oral Liquid(AOL)is an adult medicine in the Chinese Pharmacopoeia used to treat upper respiratory infections such as influenza.It has shown promising clinical efficacy in relieving flu-like symptoms such as fever,inflammation,and pharyngalgia both in adults and children.However,the instruction manual does not specify the exact usage and dosage of AOL for children.In this article,we set 6 dosage ranges:0.2,0.5,0.7,0.9,1.1,1.4 mL/kg/d,according to its dosage for adults and the conversion method between adult and children dosage.And six animal models were used to evaluate the effectiveness of AOL in different doses.The results indicated that AOL could reduce the lung index,virus load,and expression of proinflammatory cytokines in the lung.AOL could improve pathological changes and prolong the survival time of mice infected by the Influenza A virus(H1N1)A/PR/8/34 strains at 0.5–0.9 mL/kg/d concentrations in different degrees.The four dose groups of 0.7–1.4 mL/kg/d could significantly inhibit the ear shell swelling caused by xylene and reduce the rabbit body temperature induced by lipopolysaccharide(P<0.01,P<0.05).All the five dosage groups of 0.2–1.1 mL/kg/d could inhibit the increase of peritoneal capillary permeability induced by glacial acetic acid(P<0.01).AOL at 0.7 and 0.9 mL/kg/d reduced the painful writhing times in young mice induced by glacial acetic(P<0.01).These results indicated that the optimal dose of AOL in antiviral,antipyretic,anti-inflammatory,and analgesic effects is 0.7 mL/kg/d.展开更多
目的比较腹腔镜辅助胰十二指肠切除术(LAPD)与开腹胰十二指肠切除术(OPD)的近期疗效,探讨LAPD的手术安全性及可行性。方法回顾性分析2015年10月至2017年12月沧州市中心医院普外科施行的102例LAPD和179例OPD患者的临床资料,将两组各项临...目的比较腹腔镜辅助胰十二指肠切除术(LAPD)与开腹胰十二指肠切除术(OPD)的近期疗效,探讨LAPD的手术安全性及可行性。方法回顾性分析2015年10月至2017年12月沧州市中心医院普外科施行的102例LAPD和179例OPD患者的临床资料,将两组各项临床数据进行对比分析。结果 LAPD组手术时间显著长于OPD组[(381±67)min vs (245±43)min],但LAPD组术中出血量更少[(186±102)mL vs(322±75)mL],手术切口更小[(8.1±3.9)cm vs (18.9±4.3)cm],术后进流食时间、术后ICU入住时间及术后住院时间均更短,两组比较差异均有统计学意义(P<0.05)。术中淋巴结清扫数目、R0切除率、术后并发症发生率及术后6个月无瘤生存率的差异均无统计学意义(P>0.05)。结论 LAPD具有与传统OPD手术相似的安全性和肿瘤根治效果,而且具有创伤小、恢复快等优势。但LAPD手术时间更长,对术者经验要求更高。展开更多
利用无线通讯网络中的微波链路来监测降雨和水汽等是大气环境监测的新技术之一。这个技术可以测量近地面的降雨强度和水汽密度等气象参数,具有时空分辨率高、成本低等优势。利用瑞典爱立信公司(Ericsson)提供的位于哥德堡地区E频段的微...利用无线通讯网络中的微波链路来监测降雨和水汽等是大气环境监测的新技术之一。这个技术可以测量近地面的降雨强度和水汽密度等气象参数,具有时空分辨率高、成本低等优势。利用瑞典爱立信公司(Ericsson)提供的位于哥德堡地区E频段的微波通讯链路资料、位于链路一端的气象站1资料和由瑞典气象水文研究所(SMHI)气象网站提供的气象站2资料,对2017年06月13日至2017年07月13日近1个月的水汽密度进行反演计算和分析。结果表明:同一区域的不同地点处的气象要素有一定的差异性,同一区域的温度会有一定的浮动(0~4℃),两者之间的相关性为0. 87;微波通讯链路反演的水汽密度结果与研究区域的地面气象站1和气象站2测量结果有很好的一致性,两者之间的相关性分别为0. 89和0. 97,均方根误分别差为0. 75 g m3和0. 79 g m3;利用微波链路,与现有的湿度监测方法相比,可以为现有的天气监测网络提供额外的丰富的数据源。展开更多
Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that...Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that 300C24 h homogenization treatment shows better improvement on the microstructure including the refinement of grain size,the dispersion of cellular dendrite and low melting point particles.Before treatment,La and Nd segregate effectively at grain boundary and Zr segregates in the form of precipitates.Homogenization treatment induces the reduction of RE segregation.However,the segregation of Zr in precipitates cannot be abated due to the relatively low diffusion rate compared with RE elements.展开更多
Four Mg–Gd–Y–Nd–Zr alloys were prepared by mold casting to investigate the effects of Nd/Gd ratios on microstructures and mechanical properties.The as-cast alloys mainly consist ofα-Mg andβ-Mg5(GdYNd).Volume fra...Four Mg–Gd–Y–Nd–Zr alloys were prepared by mold casting to investigate the effects of Nd/Gd ratios on microstructures and mechanical properties.The as-cast alloys mainly consist ofα-Mg andβ-Mg5(GdYNd).Volume fractions of the second phase increase and grains were slightly refined with the rising Nd/Gd ratio,when the alloying addition is equal.Meanwhile,fibers of second phase also increase in the extruded alloys when the Nd/Gd value increases.However,the Nd/Gd ratio could hardly influence the mechanical properties of the extruded alloys.The aging hardening response of the extruded alloy differs due to different Nd/Gd ratios.The potential mechanisms have also been discussed in detail.展开更多
Reducing the yield asymmetry is very important concern for wrought Mg-Li alloys.In this study,Mg-5Li-3Al-2 Zn(LAZ532)alloy was successfully produced by hot-extrusion followed by multi-pass rolling at 573 K.Microstruct...Reducing the yield asymmetry is very important concern for wrought Mg-Li alloys.In this study,Mg-5Li-3Al-2 Zn(LAZ532)alloy was successfully produced by hot-extrusion followed by multi-pass rolling at 573 K.Microstructure evolution,mechanical properties and yield asymmetry reducing of LAZ532 alloys at different rolling passes were studied.By observing microstructure using transmission electron microscopy showed that a small amount of ultra-fine Al Mg_(4)Zn_(11)and nano Li_(3)Al_(2) phases existed in the alloy.With the increasing of rolling passes,the grains of the alloys were obviously refined,and comprehensive mechanical properties were dramatically improved.Meanwhile,it also showed an excellent tension and compression yield symmetry(TYS/CYS was about 1).The results showed that the combined action of the weak{0001}basal lamellar texture,grain refinement and addition of Li element could effectively improve the yield symmetry.Furthermore,based on theoretical analysis,the yield strength in the alloys mainly depended on the strengthening contributions of LAGBs and HAGBs,and strengthening effect of HAGBs most(~50%)to the yield strength improvement.展开更多
A comprehensive two-dimensional axisymmetric mathematical model that couples transient electromagnetic force with fluid flow,heat transfer,and solidification was established to describe the interaction of multiphysics...A comprehensive two-dimensional axisymmetric mathematical model that couples transient electromagnetic force with fluid flow,heat transfer,and solidification was established to describe the interaction of multiphysics field during DC casting.The melt flow,heat transfer,and solidification characteristics under differential phase pulse magnetic field and differential phase low-frequency electromagnetic field(DP-PMF and DP-LFEF)were numerically investigated by means of numerical simulation during electromagnetic direct-chill(DC)casting of AZ31 alloy at the same casting conditions.The effects of differential phase electromagnetic fields on Lorentz forces distributions,melt flow,heat transfer,and liquid sump shape were discussed systematically.Based on measured current waveform,the results were compared with those obtained without magnetic field(MF)and under conventional pulse magnetic field(PMF)and low-frequency electromagnetic field(LFEF)under the same conditions.The results show that the application of magnetic fields can significantly change the solidification process of DC casting.Differential phase magnetic fields(DP-LFEF and DP-PMF)can effectively reduce the temperature of the melt in the liquid sump,and the shallower liquid sump depth can be obtained under the differential phase magnetic fields.A large velocity vibration amplitude and a lower temperature are available simultaneously under DP-PMF,resulting in more uniform temperature distribution.展开更多
Phased array ultrasonic testing, an effective ultrasonic testing(UT) technology, has been widely used in steel inspection because of its high accuracy, sensitivity, and efficiency. However, as its application in as-ca...Phased array ultrasonic testing, an effective ultrasonic testing(UT) technology, has been widely used in steel inspection because of its high accuracy, sensitivity, and efficiency. However, as its application in as-cast magnesium alloys has just begun, more research is needed. Considering the important role of the gain compensation in quantifying defects in magnesium alloys by ultrasonic phased array technology, the effects of microstructure, the position, size, and overlap of defects, and boundary distance(distance from the defect position to the side surface of the test casting) on gain compensation of as-cast AZ80 and AZ31 magnesium alloys were studied. Results show the gain compensation increases with the increase of grain size. There is a strict linear positive correlation between gain compensation and defect depth, but such relationship no longer exists due to the defects overlap, orientation and boundary distance. In addition, there is a strict linear negative correlation between the gain compensation and defect size.展开更多
基金This work was supported by the National Key R&D Program of China(2021YFE0200300,2021YFC1712903)the Technical System of Chinese Medicine Prevention and Treatment of Influenza of the China Academy of Chinese Medical Sciences(No.ZZ13-035-09)the 2020 Annual Graduate Students Innovation Fund,School of Integrative Medicine,Tianjin University of Traditional Chinese Medicine,Tianjin,China(ZXYCXLX202021).
基金support of ABSL-2 biosafety laboratory of the Institute of Chinese Materia Medica.National Natural Science Foundation of China(No.82104500)Scientific and Technological Innovation Project of China Academy of Chinese Medical Sciences(No.CI2021B015).
文摘Antiviral Oral Liquid(AOL)is an adult medicine in the Chinese Pharmacopoeia used to treat upper respiratory infections such as influenza.It has shown promising clinical efficacy in relieving flu-like symptoms such as fever,inflammation,and pharyngalgia both in adults and children.However,the instruction manual does not specify the exact usage and dosage of AOL for children.In this article,we set 6 dosage ranges:0.2,0.5,0.7,0.9,1.1,1.4 mL/kg/d,according to its dosage for adults and the conversion method between adult and children dosage.And six animal models were used to evaluate the effectiveness of AOL in different doses.The results indicated that AOL could reduce the lung index,virus load,and expression of proinflammatory cytokines in the lung.AOL could improve pathological changes and prolong the survival time of mice infected by the Influenza A virus(H1N1)A/PR/8/34 strains at 0.5–0.9 mL/kg/d concentrations in different degrees.The four dose groups of 0.7–1.4 mL/kg/d could significantly inhibit the ear shell swelling caused by xylene and reduce the rabbit body temperature induced by lipopolysaccharide(P<0.01,P<0.05).All the five dosage groups of 0.2–1.1 mL/kg/d could inhibit the increase of peritoneal capillary permeability induced by glacial acetic acid(P<0.01).AOL at 0.7 and 0.9 mL/kg/d reduced the painful writhing times in young mice induced by glacial acetic(P<0.01).These results indicated that the optimal dose of AOL in antiviral,antipyretic,anti-inflammatory,and analgesic effects is 0.7 mL/kg/d.
文摘目的比较腹腔镜辅助胰十二指肠切除术(LAPD)与开腹胰十二指肠切除术(OPD)的近期疗效,探讨LAPD的手术安全性及可行性。方法回顾性分析2015年10月至2017年12月沧州市中心医院普外科施行的102例LAPD和179例OPD患者的临床资料,将两组各项临床数据进行对比分析。结果 LAPD组手术时间显著长于OPD组[(381±67)min vs (245±43)min],但LAPD组术中出血量更少[(186±102)mL vs(322±75)mL],手术切口更小[(8.1±3.9)cm vs (18.9±4.3)cm],术后进流食时间、术后ICU入住时间及术后住院时间均更短,两组比较差异均有统计学意义(P<0.05)。术中淋巴结清扫数目、R0切除率、术后并发症发生率及术后6个月无瘤生存率的差异均无统计学意义(P>0.05)。结论 LAPD具有与传统OPD手术相似的安全性和肿瘤根治效果,而且具有创伤小、恢复快等优势。但LAPD手术时间更长,对术者经验要求更高。
文摘利用无线通讯网络中的微波链路来监测降雨和水汽等是大气环境监测的新技术之一。这个技术可以测量近地面的降雨强度和水汽密度等气象参数,具有时空分辨率高、成本低等优势。利用瑞典爱立信公司(Ericsson)提供的位于哥德堡地区E频段的微波通讯链路资料、位于链路一端的气象站1资料和由瑞典气象水文研究所(SMHI)气象网站提供的气象站2资料,对2017年06月13日至2017年07月13日近1个月的水汽密度进行反演计算和分析。结果表明:同一区域的不同地点处的气象要素有一定的差异性,同一区域的温度会有一定的浮动(0~4℃),两者之间的相关性为0. 87;微波通讯链路反演的水汽密度结果与研究区域的地面气象站1和气象站2测量结果有很好的一致性,两者之间的相关性分别为0. 89和0. 97,均方根误分别差为0. 75 g m3和0. 79 g m3;利用微波链路,与现有的湿度监测方法相比,可以为现有的天气监测网络提供额外的丰富的数据源。
基金This work was supported by the Major State Basic Research Development Program of China(No.2013CB632203)National Key Technology R&D Program of China(2011BAE22B03)+3 种基金(2012BAF09B01)National Natural Science Foundation of China(51074207)Chinese Postdoctoral Science Foundation(2012M520634)the Fundamental Research Foundation of Central Universities(Grant Nos.N120509002 and N120309003).
文摘Mge3Lie0.4Zr alloys containing RE elements(Gd,La,Nd)(Mge3LieREe0.4Zr alloys)are investigated to reveal the influence of homogenization treatment on microstructures and distributions of RE,Zr elements.It is found that 300C24 h homogenization treatment shows better improvement on the microstructure including the refinement of grain size,the dispersion of cellular dendrite and low melting point particles.Before treatment,La and Nd segregate effectively at grain boundary and Zr segregates in the form of precipitates.Homogenization treatment induces the reduction of RE segregation.However,the segregation of Zr in precipitates cannot be abated due to the relatively low diffusion rate compared with RE elements.
基金the National Basic Research Program of China(2013CB632203)Liaoning Provincial Natural Science Foundation(Grant No.2014028027)。
文摘Four Mg–Gd–Y–Nd–Zr alloys were prepared by mold casting to investigate the effects of Nd/Gd ratios on microstructures and mechanical properties.The as-cast alloys mainly consist ofα-Mg andβ-Mg5(GdYNd).Volume fractions of the second phase increase and grains were slightly refined with the rising Nd/Gd ratio,when the alloying addition is equal.Meanwhile,fibers of second phase also increase in the extruded alloys when the Nd/Gd value increases.However,the Nd/Gd ratio could hardly influence the mechanical properties of the extruded alloys.The aging hardening response of the extruded alloy differs due to different Nd/Gd ratios.The potential mechanisms have also been discussed in detail.
基金financially supported by the National Key Research and Development Program of China(No.2016YFB0301104)National Natural Science Foundation of China(No.51771043)Programme of Introducing Talents of Discipline Innovation to Universities 2.0(the 111 Project 2.0 of China,No.BP0719037)。
文摘Reducing the yield asymmetry is very important concern for wrought Mg-Li alloys.In this study,Mg-5Li-3Al-2 Zn(LAZ532)alloy was successfully produced by hot-extrusion followed by multi-pass rolling at 573 K.Microstructure evolution,mechanical properties and yield asymmetry reducing of LAZ532 alloys at different rolling passes were studied.By observing microstructure using transmission electron microscopy showed that a small amount of ultra-fine Al Mg_(4)Zn_(11)and nano Li_(3)Al_(2) phases existed in the alloy.With the increasing of rolling passes,the grains of the alloys were obviously refined,and comprehensive mechanical properties were dramatically improved.Meanwhile,it also showed an excellent tension and compression yield symmetry(TYS/CYS was about 1).The results showed that the combined action of the weak{0001}basal lamellar texture,grain refinement and addition of Li element could effectively improve the yield symmetry.Furthermore,based on theoretical analysis,the yield strength in the alloys mainly depended on the strengthening contributions of LAGBs and HAGBs,and strengthening effect of HAGBs most(~50%)to the yield strength improvement.
基金the National Natural Science Foundation of China(51974082)the National Natural Science Foundation of China(51771043)the Programme of Introducing Talents of Discipline Innovation to Universities 2.0(the 111 Project 2.0 of China,No.BP0719037).
文摘A comprehensive two-dimensional axisymmetric mathematical model that couples transient electromagnetic force with fluid flow,heat transfer,and solidification was established to describe the interaction of multiphysics field during DC casting.The melt flow,heat transfer,and solidification characteristics under differential phase pulse magnetic field and differential phase low-frequency electromagnetic field(DP-PMF and DP-LFEF)were numerically investigated by means of numerical simulation during electromagnetic direct-chill(DC)casting of AZ31 alloy at the same casting conditions.The effects of differential phase electromagnetic fields on Lorentz forces distributions,melt flow,heat transfer,and liquid sump shape were discussed systematically.Based on measured current waveform,the results were compared with those obtained without magnetic field(MF)and under conventional pulse magnetic field(PMF)and low-frequency electromagnetic field(LFEF)under the same conditions.The results show that the application of magnetic fields can significantly change the solidification process of DC casting.Differential phase magnetic fields(DP-LFEF and DP-PMF)can effectively reduce the temperature of the melt in the liquid sump,and the shallower liquid sump depth can be obtained under the differential phase magnetic fields.A large velocity vibration amplitude and a lower temperature are available simultaneously under DP-PMF,resulting in more uniform temperature distribution.
基金financially supported by the National Key Research and Development Program of China(Grant No.2017YFB0305504)the National Natural Science Foundation of China(Grant No.51771043)
文摘Phased array ultrasonic testing, an effective ultrasonic testing(UT) technology, has been widely used in steel inspection because of its high accuracy, sensitivity, and efficiency. However, as its application in as-cast magnesium alloys has just begun, more research is needed. Considering the important role of the gain compensation in quantifying defects in magnesium alloys by ultrasonic phased array technology, the effects of microstructure, the position, size, and overlap of defects, and boundary distance(distance from the defect position to the side surface of the test casting) on gain compensation of as-cast AZ80 and AZ31 magnesium alloys were studied. Results show the gain compensation increases with the increase of grain size. There is a strict linear positive correlation between gain compensation and defect depth, but such relationship no longer exists due to the defects overlap, orientation and boundary distance. In addition, there is a strict linear negative correlation between the gain compensation and defect size.
