The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics ...The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.展开更多
The solidification and corrosion behavior of the Ti/B added Zn-Al-Mg alloys were experimentally investigated by means of microstructure characterization and electrochemical test.The basic calculations were carried out...The solidification and corrosion behavior of the Ti/B added Zn-Al-Mg alloys were experimentally investigated by means of microstructure characterization and electrochemical test.The basic calculations were carried out to predict the characteristics of the Ti-added Zn-Al-Mg alloys.The Zn-Al-Mg ingots with minor doping of Ti/B were prepared and solidified under different cooling rate,including air cooling,water quenching and furnace cooling.The scanning electron microscopy(SEM)and the X-ray diffraction method(XRD)were used to determine the microstructures and phase types of the alloy samples.It could be discovered that trace TiAl3 particles were dispersed in the Ti/B added alloy samples which provide the heterogeneous nucleation sites to refine the size of the dendrites and the eutectic microstructures.More fined microstructures with the addition of both Ti and B were obtained compared with those with the merely addition of Ti,and the water cooled alloys presented the finest microstructures due to the fastest cooling rate.It could also be noticed that with the increasing solidification rate,the percentage of the MgZn_(2) phase turned out to be higher because of the Mg_(2)Zn_(11)↔MgZn_(2) transition,which is in consistent with the results in the actual hot-dip galvanizing process.Electrochemical experiments in the previous work included methods the of the Tafel polarization test and the electrochemical impedance spectroscopy test(EIS).Results show that the quenched Zn-Al-Mg alloy with the addition of both Ti and B takes on best corrosion resistance.Consequently,the addition of certain amount of Ti/B elements and the appropriate elevation of the cooling rate will be the practicable approaches to optimize the microstructure and the corrosion resistance of the Zn-Al-Mg coatings in the actual galvanizing process.展开更多
The results of evaluation on field control efficacy of Trichogramma dendrolimi against Ostrinia furnacalis showed that the correction rates of Ostrinia furnacalis egg mass parasitism were 71.75% and 73.57%,the average...The results of evaluation on field control efficacy of Trichogramma dendrolimi against Ostrinia furnacalis showed that the correction rates of Ostrinia furnacalis egg mass parasitism were 71.75% and 73.57%,the average control effect were 65.85% and 70.24%,the restoration yield loss rates were 6.78% and 7.97%,input-output ratio at 1:27.8 and 1:33.5 in Longjiang county of Heilongjiang province in 2009 and 2010,respectively.The technology is a integration of advanced,practical,environmental safety,effective biocontrol measures,embodies the "public plant protection,green plant protection" fully,has significant economic,social and ecological benefits.展开更多
Based on well logging responses,sedimentary patterns and sandstone thickness,the distribution characteristics of meandering river sedimentary sand body of Neogene Minghuazhen Formation NmⅢ2 layer in the west of Shiji...Based on well logging responses,sedimentary patterns and sandstone thickness,the distribution characteristics of meandering river sedimentary sand body of Neogene Minghuazhen Formation NmⅢ2 layer in the west of Shijiutuo Bulge,Chengning Uplift,Bohai Bay Basin were investigated.A new approach to calculate the occurrence of the sand-mudstone interfaces using resistivity log of horizontal well was advanced to solve the multiple solution problem of abandoned channel’s orientation.This method uses the trigonometric function relationship between radius,dip and length of the resistivity log to calculate the occurrence qualitatively-quantitatively to help determine the true direction of the abandoned channels.This method can supplement and improve the architecture dissection technique for meandering river sandbodies.This method was used to study the dip angle and scale of the lateral accretion layers in point bar quantitatively to help determine the spatial distribution of lateral accretion layers.The fine architecture model of underground meandering river reservoir in the study area has been established.Different from traditional grids,different grid densities for lateral accretion layers and bodies were used in this model by non-uniform upscaling to establish the inner architecture model of point-bars and realize industrial numerical simulation of the whole study area.The research results can help us predict the distribution of remaining oil,tap remaining oil,and optimize the waterflooding in oilfields.展开更多
Objective VATER/VACTERL-like association is associated with adverse pregnancy outcomes.Genetic evidence of this disorder is sporadic.In this study,we aimed to provide genetic insights to improve the diagnosis of VACTE...Objective VATER/VACTERL-like association is associated with adverse pregnancy outcomes.Genetic evidence of this disorder is sporadic.In this study,we aimed to provide genetic insights to improve the diagnosis of VACTERL.Methods We have described a Chinese family in which four members were affected by renal defects or agenesis,anal atresia,and anovaginal fistula,which is consistent with the diagnosis of a VACTERL-like association.Pedigree and genetic analyses were conducted using genome and exome sequencing.Results Segregation analysis revealed the presence of a recessive X-linked microdeletion in two living affected individuals,harboring a 196–380 kb microdeletion on Xq27.1,which was identified by familial exome sequencing.Genome sequencing was performed on the affected male,confirming a-196 kb microdeletion in Xq27.1,which included a 28%loss of the CDR-1 gene.Four family members were included in the co-segregation analysis,and only VACTERL-like cases with microdeletions were reported in X27.1.Conclusion These results suggest that the 196–380 kb microdeletion in Xq27.1 could be a possible cause of the VATER/VACTERL-like association.However,further genetic and functional analyses are required to confirm or rule out genetic background as the definitive cause of the VACTERL association.展开更多
A LiFePO4/C composite was synthesized by a simple solid-state reaction method using glucose as reductive agent and carbon source and FePO4 as precursor, which was prepared by introduction of Na3PO4 as phosphorus sourc...A LiFePO4/C composite was synthesized by a simple solid-state reaction method using glucose as reductive agent and carbon source and FePO4 as precursor, which was prepared by introduction of Na3PO4 as phosphorus source and pH regulator in order to pursue lower cost and environmental protection. The structure and morphology of FePO4 and LiFePO4/C were investigated by X-ray diffraction(XRD) and scanning electron microscopy(SEM). Furthermore, electrochemical performance of LiFePO4/C was investigated by galvanostatic charge–discharge tests and cyclicvoltammogram(CV). The results indicate that FePO4 obtained has a small particle size and uniform particle distribution, which is demonstrated to be applicable as the iron source to synthesize LiFePO4/C. Prepared LiFePO4/C shows an excellent rate capability and cycle performance. At rates of 0.1 C, 0.2 C, 1 C and 2 C, the initial discharge capacities of 161, 158, 145 and 120 mAh/g were achieved, respectively and the discharge capacity is 154, 153, 140 and 116 mAh/g after 400 cycles. The employed method of preparing FePO4 by introduction of Na3PO4 has advantages such as low cost, safe raw material, environmental benign and recyclable products, which is suitable for industrial production.展开更多
基金financially supported by the Natural Science Foundation of China(Grant Nos.42272104,42172094 and 41772076)。
文摘The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.
基金Funded by the Provincial Key Research and Development Program of Hebei(No.20311004D)the Foundation of Shougang Research Institute of Technology(No.2020RZ06-031)。
文摘The solidification and corrosion behavior of the Ti/B added Zn-Al-Mg alloys were experimentally investigated by means of microstructure characterization and electrochemical test.The basic calculations were carried out to predict the characteristics of the Ti-added Zn-Al-Mg alloys.The Zn-Al-Mg ingots with minor doping of Ti/B were prepared and solidified under different cooling rate,including air cooling,water quenching and furnace cooling.The scanning electron microscopy(SEM)and the X-ray diffraction method(XRD)were used to determine the microstructures and phase types of the alloy samples.It could be discovered that trace TiAl3 particles were dispersed in the Ti/B added alloy samples which provide the heterogeneous nucleation sites to refine the size of the dendrites and the eutectic microstructures.More fined microstructures with the addition of both Ti and B were obtained compared with those with the merely addition of Ti,and the water cooled alloys presented the finest microstructures due to the fastest cooling rate.It could also be noticed that with the increasing solidification rate,the percentage of the MgZn_(2) phase turned out to be higher because of the Mg_(2)Zn_(11)↔MgZn_(2) transition,which is in consistent with the results in the actual hot-dip galvanizing process.Electrochemical experiments in the previous work included methods the of the Tafel polarization test and the electrochemical impedance spectroscopy test(EIS).Results show that the quenched Zn-Al-Mg alloy with the addition of both Ti and B takes on best corrosion resistance.Consequently,the addition of certain amount of Ti/B elements and the appropriate elevation of the cooling rate will be the practicable approaches to optimize the microstructure and the corrosion resistance of the Zn-Al-Mg coatings in the actual galvanizing process.
基金The National public service sectors (agriculture) research special (201103002)
文摘The results of evaluation on field control efficacy of Trichogramma dendrolimi against Ostrinia furnacalis showed that the correction rates of Ostrinia furnacalis egg mass parasitism were 71.75% and 73.57%,the average control effect were 65.85% and 70.24%,the restoration yield loss rates were 6.78% and 7.97%,input-output ratio at 1:27.8 and 1:33.5 in Longjiang county of Heilongjiang province in 2009 and 2010,respectively.The technology is a integration of advanced,practical,environmental safety,effective biocontrol measures,embodies the "public plant protection,green plant protection" fully,has significant economic,social and ecological benefits.
基金Supported by the China National Science and Technology Major Project(2008ZX05030-005-012011ZX05004-004-007).
文摘Based on well logging responses,sedimentary patterns and sandstone thickness,the distribution characteristics of meandering river sedimentary sand body of Neogene Minghuazhen Formation NmⅢ2 layer in the west of Shijiutuo Bulge,Chengning Uplift,Bohai Bay Basin were investigated.A new approach to calculate the occurrence of the sand-mudstone interfaces using resistivity log of horizontal well was advanced to solve the multiple solution problem of abandoned channel’s orientation.This method uses the trigonometric function relationship between radius,dip and length of the resistivity log to calculate the occurrence qualitatively-quantitatively to help determine the true direction of the abandoned channels.This method can supplement and improve the architecture dissection technique for meandering river sandbodies.This method was used to study the dip angle and scale of the lateral accretion layers in point bar quantitatively to help determine the spatial distribution of lateral accretion layers.The fine architecture model of underground meandering river reservoir in the study area has been established.Different from traditional grids,different grid densities for lateral accretion layers and bodies were used in this model by non-uniform upscaling to establish the inner architecture model of point-bars and realize industrial numerical simulation of the whole study area.The research results can help us predict the distribution of remaining oil,tap remaining oil,and optimize the waterflooding in oilfields.
基金National High Level Hospital Clinical Research Funding(BJ-2018-204,BJ-2023-112)。
文摘Objective VATER/VACTERL-like association is associated with adverse pregnancy outcomes.Genetic evidence of this disorder is sporadic.In this study,we aimed to provide genetic insights to improve the diagnosis of VACTERL.Methods We have described a Chinese family in which four members were affected by renal defects or agenesis,anal atresia,and anovaginal fistula,which is consistent with the diagnosis of a VACTERL-like association.Pedigree and genetic analyses were conducted using genome and exome sequencing.Results Segregation analysis revealed the presence of a recessive X-linked microdeletion in two living affected individuals,harboring a 196–380 kb microdeletion on Xq27.1,which was identified by familial exome sequencing.Genome sequencing was performed on the affected male,confirming a-196 kb microdeletion in Xq27.1,which included a 28%loss of the CDR-1 gene.Four family members were included in the co-segregation analysis,and only VACTERL-like cases with microdeletions were reported in X27.1.Conclusion These results suggest that the 196–380 kb microdeletion in Xq27.1 could be a possible cause of the VATER/VACTERL-like association.However,further genetic and functional analyses are required to confirm or rule out genetic background as the definitive cause of the VACTERL association.
基金Funded by Natural Science Foundation of Hebei Province(No E2017409004)Department of Education of Hebei Province(No QN2016224)
文摘A LiFePO4/C composite was synthesized by a simple solid-state reaction method using glucose as reductive agent and carbon source and FePO4 as precursor, which was prepared by introduction of Na3PO4 as phosphorus source and pH regulator in order to pursue lower cost and environmental protection. The structure and morphology of FePO4 and LiFePO4/C were investigated by X-ray diffraction(XRD) and scanning electron microscopy(SEM). Furthermore, electrochemical performance of LiFePO4/C was investigated by galvanostatic charge–discharge tests and cyclicvoltammogram(CV). The results indicate that FePO4 obtained has a small particle size and uniform particle distribution, which is demonstrated to be applicable as the iron source to synthesize LiFePO4/C. Prepared LiFePO4/C shows an excellent rate capability and cycle performance. At rates of 0.1 C, 0.2 C, 1 C and 2 C, the initial discharge capacities of 161, 158, 145 and 120 mAh/g were achieved, respectively and the discharge capacity is 154, 153, 140 and 116 mAh/g after 400 cycles. The employed method of preparing FePO4 by introduction of Na3PO4 has advantages such as low cost, safe raw material, environmental benign and recyclable products, which is suitable for industrial production.
