Au investigation was carried ont of the effect of Y addition upon the internal stress of Al_2O_3 scale formed during oxidation of sputtering coating on Co-30Cr-6Al alloy and the growth stress of oxidized film on Fe-23...Au investigation was carried ont of the effect of Y addition upon the internal stress of Al_2O_3 scale formed during oxidation of sputtering coating on Co-30Cr-6Al alloy and the growth stress of oxidized film on Fe-23Cr-5Al alloy heating up to 900℃ in air,using a specially designed deflection method from thin strip specimen with coat- ings,ion-implanted Y on one side and oxidized onto both sides.Results indicate that Y may decrease the internal stress of oxide scale on 2×10^(17) Y^+/cm^2 implanted Co- 30Cr-6Al coating,and increase one on 2×10^(16) Y^+/cm^2 implanted Fe-23Cr-5Al alloy. This seems due to whether or not Y promotes the plastic deformation of oxide scale.In addition,at initial oxidation stage,the change of growth stress of oxide scale formed on Y-implanted Co-30Cr-6Al coating may be related to the influence of Y on oxidation process of the coating.展开更多
The dynamic behaviour of transient liquid phase during sintering 5wt% Al-Cu alloy compacts with green density of 7.56g/cn￣3 is observed by means of high temperature metallographic microscopy. The structures and preci...The dynamic behaviour of transient liquid phase during sintering 5wt% Al-Cu alloy compacts with green density of 7.56g/cn￣3 is observed by means of high temperature metallographic microscopy. The structures and precipitating order of the phases are identified by means of DTA, TEM and composion analysis at the definite point and phase diagram. The results show that little Al-rich liquid phase resulting from eutectic reaction flows into the capillaries in Cu powder, because the peritectic reactions exhausts the liquid in high density compact,the composition homogenization needs longer sintering time. The remainder γ2-phase is discovered at place of the neck of sintered Cu particle and has a crystallographic relationship of (111)_(Cu)∥(033)_γ_2 after alloy is sintered at 900 ℃for 3h.展开更多
High temperature corrosion properties of M38 alloy with and without 0.04 wt-%Y and 0.05 wt-%Ce additions were studied in equilibrated S0_(2)+0_(2)gas mixtures at 850℃and 900℃.It was found that adding Y or Ce decreas...High temperature corrosion properties of M38 alloy with and without 0.04 wt-%Y and 0.05 wt-%Ce additions were studied in equilibrated S0_(2)+0_(2)gas mixtures at 850℃and 900℃.It was found that adding Y or Ce decreased the corrosion rate of M38 and changed considerably the surface morphologies and composition of corrosion products on M38.The effectiveness of Y and Ce were also discussed.展开更多
316L stainless steel coatings were prepared by cold gas dynamic spraying （CGDS） on a carbon steel. A new heater of sprayed powders was added to the traditional facility. The results show that the coating quality is ...316L stainless steel coatings were prepared by cold gas dynamic spraying （CGDS） on a carbon steel. A new heater of sprayed powders was added to the traditional facility. The results show that the coating quality is obviously improved, due to better interface bonding and reduced porosity.展开更多
文摘Au investigation was carried ont of the effect of Y addition upon the internal stress of Al_2O_3 scale formed during oxidation of sputtering coating on Co-30Cr-6Al alloy and the growth stress of oxidized film on Fe-23Cr-5Al alloy heating up to 900℃ in air,using a specially designed deflection method from thin strip specimen with coat- ings,ion-implanted Y on one side and oxidized onto both sides.Results indicate that Y may decrease the internal stress of oxide scale on 2×10^(17) Y^+/cm^2 implanted Co- 30Cr-6Al coating,and increase one on 2×10^(16) Y^+/cm^2 implanted Fe-23Cr-5Al alloy. This seems due to whether or not Y promotes the plastic deformation of oxide scale.In addition,at initial oxidation stage,the change of growth stress of oxide scale formed on Y-implanted Co-30Cr-6Al coating may be related to the influence of Y on oxidation process of the coating.
文摘The dynamic behaviour of transient liquid phase during sintering 5wt% Al-Cu alloy compacts with green density of 7.56g/cn￣3 is observed by means of high temperature metallographic microscopy. The structures and precipitating order of the phases are identified by means of DTA, TEM and composion analysis at the definite point and phase diagram. The results show that little Al-rich liquid phase resulting from eutectic reaction flows into the capillaries in Cu powder, because the peritectic reactions exhausts the liquid in high density compact,the composition homogenization needs longer sintering time. The remainder γ2-phase is discovered at place of the neck of sintered Cu particle and has a crystallographic relationship of (111)_(Cu)∥(033)_γ_2 after alloy is sintered at 900 ℃for 3h.
基金supported by the Natural Science Foundation of China。
文摘High temperature corrosion properties of M38 alloy with and without 0.04 wt-%Y and 0.05 wt-%Ce additions were studied in equilibrated S0_(2)+0_(2)gas mixtures at 850℃and 900℃.It was found that adding Y or Ce decreased the corrosion rate of M38 and changed considerably the surface morphologies and composition of corrosion products on M38.The effectiveness of Y and Ce were also discussed.
文摘316L stainless steel coatings were prepared by cold gas dynamic spraying （CGDS） on a carbon steel. A new heater of sprayed powders was added to the traditional facility. The results show that the coating quality is obviously improved, due to better interface bonding and reduced porosity.
