Superconducting quantum interference devices(SQUIDs) are low-noise amplifiers that are essential for the readouts of translation edge sensors(TESs). The linear flux range is an important parameter for SQUID amplifiers...Superconducting quantum interference devices(SQUIDs) are low-noise amplifiers that are essential for the readouts of translation edge sensors(TESs). The linear flux range is an important parameter for SQUID amplifiers, especially those controlled by high-bandwidth digital flux-locked-loop circuits. A large linear flux range conduces to accurately measuring the input signal and also increasing the multiplexing factor in the time-division multiplexed(TDM) readout scheme of the TES array. In this work, we report that the linear flux range of an SQUID can be improved by using self-feedback effect. When the SQUID loop is designed to be asymmetric, a voltage-biased SQUID shows an asymmetric current–flux(I–Φ) response curve. The linear flux range is improved along the I–Φ curve with a shallow slope. The experimental results accord well with the numerical simulations. The asymmetric SQUID will be able to serve as a building block in the development of the TDM readout systems for large TES arrays.展开更多
Superconducting nanowire single-photon detectors(SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of inci...Superconducting nanowire single-photon detectors(SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability(PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum(SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter(MMD2 Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ_(0)/M with Φ_(0) being a single magnetic flux quantum. By employing the MMD2 Q circuit,the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2 Q circuit is fabricated, and a PNR of3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2 Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.展开更多
Several types of REBa2Cu3O7-x （REBCO, RE=Y, Ho etc.） films are prepared on single crystal substrate LaAIO3 by TFA-MOD method. The phase transformation and optimized growth conditions in the crystallization are studi...Several types of REBa2Cu3O7-x （REBCO, RE=Y, Ho etc.） films are prepared on single crystal substrate LaAIO3 by TFA-MOD method. The phase transformation and optimized growth conditions in the crystallization are studied. Compared with SmBCO and GdBCO, high quality YBCO and HoBCO films are relatively easy to produce. It is revealed that the YBCO grains can form at low temperatures such as 730 ℃ during the initial heating ramp. With a high heating rate of 20 K/min and a low oxygen pressure of 100 ppm, the optimum growth temperature is around 780℃, at which the films show a Jc value of 2.88 MMcm2. Further decrease of the heating rate may produce the highquality YBCO Film with a higher Jc of 3.65 MA/cm2. The temperature dependence of resistances in various magnetic fields up to 9 T shows that the present TFAMOD YBCO and HoBCO films have similar superonducting transition temperature and magnetotransport properties.展开更多
基金Project supported by the Fund from China National Space Administration (CNSA) (Grant No. D050104)the Fund for Low Energy Gamma Ray Detection Research Based on SQUID Techniquethe Superconducting Electronics Facility (SELF) of Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences。
文摘Superconducting quantum interference devices(SQUIDs) are low-noise amplifiers that are essential for the readouts of translation edge sensors(TESs). The linear flux range is an important parameter for SQUID amplifiers, especially those controlled by high-bandwidth digital flux-locked-loop circuits. A large linear flux range conduces to accurately measuring the input signal and also increasing the multiplexing factor in the time-division multiplexed(TDM) readout scheme of the TES array. In this work, we report that the linear flux range of an SQUID can be improved by using self-feedback effect. When the SQUID loop is designed to be asymmetric, a voltage-biased SQUID shows an asymmetric current–flux(I–Φ) response curve. The linear flux range is improved along the I–Φ curve with a shallow slope. The experimental results accord well with the numerical simulations. The asymmetric SQUID will be able to serve as a building block in the development of the TDM readout systems for large TES arrays.
基金supported by the National Key R&D Program of China (Grant No. 2017YFA0304000)the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDA18000000)the Science and Technology Commission of Shanghai Municipality, China (Grant No. 18511110200)。
文摘Superconducting nanowire single-photon detectors(SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability(PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum(SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter(MMD2 Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ_(0)/M with Φ_(0) being a single magnetic flux quantum. By employing the MMD2 Q circuit,the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2 Q circuit is fabricated, and a PNR of3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2 Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.
基金This work was supported by the National Natural Science Foundation of China under Grant No. 50672057, 50702033 and 10774098the National Science Foundation of China (973 Projects) under Grant No. 2006CB601005+1 种基金the Science and Technology Commission of Shanghai Municipality under Grant No. 0752nm017the Project Based Personnel Exchange Program between China and Germany under Grant No. [2006] 3139.
文摘Several types of REBa2Cu3O7-x （REBCO, RE=Y, Ho etc.） films are prepared on single crystal substrate LaAIO3 by TFA-MOD method. The phase transformation and optimized growth conditions in the crystallization are studied. Compared with SmBCO and GdBCO, high quality YBCO and HoBCO films are relatively easy to produce. It is revealed that the YBCO grains can form at low temperatures such as 730 ℃ during the initial heating ramp. With a high heating rate of 20 K/min and a low oxygen pressure of 100 ppm, the optimum growth temperature is around 780℃, at which the films show a Jc value of 2.88 MMcm2. Further decrease of the heating rate may produce the highquality YBCO Film with a higher Jc of 3.65 MA/cm2. The temperature dependence of resistances in various magnetic fields up to 9 T shows that the present TFAMOD YBCO and HoBCO films have similar superonducting transition temperature and magnetotransport properties.
