Objective:Based on the health belief model,the depression status of medical students was analyzed in order to provide new ideas for the intervention of mental health problems of medical students.Methods:By using the m...Objective:Based on the health belief model,the depression status of medical students was analyzed in order to provide new ideas for the intervention of mental health problems of medical students.Methods:By using the method of stratified cluster sampling,1053 medical students in a medical college in Hainan province were investigated with self-designed general situation questionnaire,SCL-90,CSQ and emotional management health belief questionnaire.Results:The positive rate of depressive symptoms in medical students was 17.5%.Multivariate unconditional Logistic regression analysis showed that gender,coping style,"perceived obstacles","perceived severity","perceived susceptibility"and"self-efficacy"were related factors of depression in medical studengts.Conclusion:The related factors of depression in medical students include personal factors and the health belief factors such as"perceived obstacles","perceived severity","perceived susceptibility"and"self-efficacy".Psychological intervention based on Health belief model can be used for intervention of medical students.展开更多
In the present work, Zn-（0-1）Mg（wt%） alloys were prepared by casting and indirect extrusion at 200 and300 ℃, respectively. With Mg addition, both the size and amount of second phase Mg2Zn（11） increased, and the...In the present work, Zn-（0-1）Mg（wt%） alloys were prepared by casting and indirect extrusion at 200 and300 ℃, respectively. With Mg addition, both the size and amount of second phase Mg2Zn（11） increased, and the equiaxed grains were significantly refined. The extrusion temperature had little influence on Mg2Zn（11）, but the grains were refined at low extrusion temperature. For the alloys extruded at 200 ℃, as Mg content increased, the tensile yield strength（TYS）increased from 64 MPa for pure Zn to 262 MPa for Zn-1Mg; the elongation increased from 14.3% for pure Zn to 25% for Zn-0.02Mg and then decreased to 5% for Zn-1Mg. For the alloys extruded at 300 ℃, as Mg content increased, the TYS increased from 67 MPa for pure Zn to 252 MPa for Zn-1Mg, while the elongation decreased from 11.7% to 2%. The alloy extruded at 200 ℃ exhibited higher TYS and elongation than the corresponding alloy extruded at 300 ℃. The combination of grain refinement and second phase Mg2Zn（11） contributed to the improvement in the TYS, and the grain refinement played a major role in strengthening alloy. Zn-0.02Mg and Zn-0.05Mg alloys extruded at 200 ℃ show a mixture of cleavage and ductile fracture corresponding to higher elongation, while the other alloys show cleavage fracture.展开更多
Mg–Zn–Ag alloys have been extensively studied in recent years for potential biodegradable implants due to their unique mechanical properties,biodegradability and biocompatibility.In the present study,Mg–3Zn-x Ag（w...Mg–Zn–Ag alloys have been extensively studied in recent years for potential biodegradable implants due to their unique mechanical properties,biodegradability and biocompatibility.In the present study,Mg–3Zn-x Ag（wt%,x=0.2,0.5 and0.8）alloys with single-phase crystal structure were prepared by backward extrusion at 340°C.The addition of Ag element into Mg–3Zn slightly influences the ultimate tensile strength and microstructure,but the elongation firstly increases from12%to 19.8%and then decreases from 19.8%to 9.9%with the increment of Ag concentration.The tensile yield strength,ultimate tensile strength and elongation of Mg–3Zn–0.2Ag alloy reach up to 142,234 MPa and 19.8%,respectively,which are the best mechanical performance of Mg–Zn–Ag alloys in the present work.The extruded Mg–3Zn–0.2Ag alloy also possesses the best corrosion behavior with the corresponding corrosion rate of 3.2 mm/year in immersion test,which could be explained by the single-phase and uniformly distributed grain structure,and the fewer twinning.展开更多
基金Projects(51371046,51525101,U1610253)supported by the National Natural Science Foundation of ChinaProject(NECT-12-0109)supported by the Program for New Century Excellent Talents in University,China+1 种基金Projects(N130510002,N141008001)supported by the Fundamental Research Funds for the Central Universities,ChinaProject supported by the Doctoral Thesis Cultivation Program of Northeastern University,China
基金Hainan provincial philosophy and social science planning project(No.HNSK(YB)16-114).
文摘Objective:Based on the health belief model,the depression status of medical students was analyzed in order to provide new ideas for the intervention of mental health problems of medical students.Methods:By using the method of stratified cluster sampling,1053 medical students in a medical college in Hainan province were investigated with self-designed general situation questionnaire,SCL-90,CSQ and emotional management health belief questionnaire.Results:The positive rate of depressive symptoms in medical students was 17.5%.Multivariate unconditional Logistic regression analysis showed that gender,coping style,"perceived obstacles","perceived severity","perceived susceptibility"and"self-efficacy"were related factors of depression in medical studengts.Conclusion:The related factors of depression in medical students include personal factors and the health belief factors such as"perceived obstacles","perceived severity","perceived susceptibility"and"self-efficacy".Psychological intervention based on Health belief model can be used for intervention of medical students.
基金supported by the National Natural Science Foundation of China (Nos.51525101 and 51371046)the Program for New Century Excellent Talents in University (No.NECT-12-0109)the Fundamental Research Funds for the Central Universities (Nos.N130510002,N141008001)
文摘In the present work, Zn-（0-1）Mg（wt%） alloys were prepared by casting and indirect extrusion at 200 and300 ℃, respectively. With Mg addition, both the size and amount of second phase Mg2Zn（11） increased, and the equiaxed grains were significantly refined. The extrusion temperature had little influence on Mg2Zn（11）, but the grains were refined at low extrusion temperature. For the alloys extruded at 200 ℃, as Mg content increased, the tensile yield strength（TYS）increased from 64 MPa for pure Zn to 262 MPa for Zn-1Mg; the elongation increased from 14.3% for pure Zn to 25% for Zn-0.02Mg and then decreased to 5% for Zn-1Mg. For the alloys extruded at 300 ℃, as Mg content increased, the TYS increased from 67 MPa for pure Zn to 252 MPa for Zn-1Mg, while the elongation decreased from 11.7% to 2%. The alloy extruded at 200 ℃ exhibited higher TYS and elongation than the corresponding alloy extruded at 300 ℃. The combination of grain refinement and second phase Mg2Zn（11） contributed to the improvement in the TYS, and the grain refinement played a major role in strengthening alloy. Zn-0.02Mg and Zn-0.05Mg alloys extruded at 200 ℃ show a mixture of cleavage and ductile fracture corresponding to higher elongation, while the other alloys show cleavage fracture.
基金supported by the National Natural Science Foundation of China (Nos. 51371046 and 51525101)the National Key Research and Development Program of China (No. 2016YFB0701202)the Fundamental Research Funds of the Central Universities (No. N141008001)
文摘Mg–Zn–Ag alloys have been extensively studied in recent years for potential biodegradable implants due to their unique mechanical properties,biodegradability and biocompatibility.In the present study,Mg–3Zn-x Ag（wt%,x=0.2,0.5 and0.8）alloys with single-phase crystal structure were prepared by backward extrusion at 340°C.The addition of Ag element into Mg–3Zn slightly influences the ultimate tensile strength and microstructure,but the elongation firstly increases from12%to 19.8%and then decreases from 19.8%to 9.9%with the increment of Ag concentration.The tensile yield strength,ultimate tensile strength and elongation of Mg–3Zn–0.2Ag alloy reach up to 142,234 MPa and 19.8%,respectively,which are the best mechanical performance of Mg–Zn–Ag alloys in the present work.The extruded Mg–3Zn–0.2Ag alloy also possesses the best corrosion behavior with the corresponding corrosion rate of 3.2 mm/year in immersion test,which could be explained by the single-phase and uniformly distributed grain structure,and the fewer twinning.
