Asymptotic solutions for laminar flow in a channel with uniformly accelerating rigid porous walls

A theoretical investigation was done for the generalized Berman problem, which arises in steady laminar flow of an incompressible viscous fluid along a channel with accelerating rigid porous walls. The existence of multiple solutions and its conditions were established by taking into account exponentially small terms in matched asymptotic expansion. The correctness of the analytical predictions was verified by numerical results.

Magnetic nanoparticle drug targeting to patient-specific atherosclerosis: effects of magnetic field intensity and configuration

Nanoparticle-mediated drug delivery is recognized as a promising option for targeted treatment of atherosclerosis. In this paper, the Eulerian-Lagrangian technique is adopted to simulate the delivery of drug-loaded nanoparticles to patient-specific atherosclerotic plaque with the aid of an external magnetic field. Plaques and vascular walls are introduced as porous media formulated by the Darcy-Forchheimer model in this targeted transport process. The results demonstrate that the delivery efficiency of particles to atherosclerosis depends on the external magnetic field, such as configuration and intensity, in which the configuration angle of the current wire is a key factor and the double current wires have advantages over the single current wire. Meanwhile, the delivery efficiency gradually decreases as the distance between the plaque cap and the current wire increases. Further, although augmenting the current or magnetic susceptibility can generally improve the delivery efficiency of nanoparticles, this increase is not apparent when small-sized nanoparticles are employed as drug transport particles. The results obtained can potentially serve as the guideline to optimize regimens for the targeted therapy of atherosclerosis.

Second-order slip MHD flow and heat transfer of nanofluids with thermal radiation and chemical reaction

The effects of the second-order velocity slip and temperature jump boundary conditions on the magnetohydrodynamic （MHD） flow and heat transfer in the presence of nanoparticle fractions are investigated. In the modeling of the water-based nanofluids containing Cu and A1203, the effects of the Brownian motion, thermophoresis, and thermal radiation are considered. The governing boundary layer equations are transformed into a system of nonlinear differential equations, and the analytical approximations of the solutions axe derived by the homotopy analysis method （HAM）. The reliability and efficiency of the HAM solutions are verified by the residual errors and the numerical results in the literature. Moreover, the effects of the physical factors on the flow and heat transfer are discussed graphically.

Heat transfer of nanofluids considering nanoparticle migration and second-order slip velocity

The heat transfer of a magnetohydrodynamics nanofluid inside an annulus considering the second-order slip condition and nanoparticle migration is theoret-ically investigated. A second-order slip condition, which appropriately represents the non-equilibrium region near the interface, is prescribed rather than the no-slip condition and the linear Navier slip condition. To impose different temperature gradients, the outer wall is subjected to q2, the inner wall is subjected to q1, and q1 〉 q2. A modified two-component four-equation non-homogeneous equilibrium model is employed for the nanofiuid, which have been reduced to two-point ordinary boundary value differential equations in the consideration of the thermally and hydrodynamically fully developed flow. The homotopy analysis method （HAM） is employed to solve the equations, and the h-curves are plotted to verify the accuracy and efficiency of the solutions. Moreover, the effects of the physical factors on the flow and heat transfer are discussed in detail, and the semi-analytical relation between NUB and NBT is obtained.

Effects of nonlinear velocity slip and temperature jump onpseudo-plastic power-law fluid over moving permeable surface in presence of magnetic field

Flow and heat transfer of a pseudo-plastic power-law fluid over a stretching permeable surface with the magnetic effect is investigated. In the boundary conditions,the nonlinear temperature jump and the velocity slip are considered. Semi-similarity equations are obtained and solved by bvp4c with MATLAB. The problem can be considered as an extension of the previous work done by Mahmoud(Mahmoud, M. A. A. Slip velocity effect on a non-Newtonian power-law fluid over a moving permeable surface with heat generation. Mathematical and Computer Modelling, 54, 1228–1237(2011)). Efforts are made to discuss the effects of the power-law number, slip velocity, and temperature jump on the dimensionless velocity and temperature distribution.

Convection of Maxwell fluid over stretching porous surface with heat source/sink in presence of nanoparticles:Lie group analysis

The convection of a Maxwell fluid over a stretching porous surface with a heat source/sink in the presence of nanoparticles is investigated. The Lie symmetry group transformations are used to convert the boundary layer equations into coupled nonlinear ordinary differential equations. The ordinary differential equations are solved numerically by the Bvp4c with MATLAB, which is a collocation method equivalent to the fourth-order mono-implicit Runge-Kutta method. Furthermore, more attention is paid to the effects of the physical parameters, especially the parameters related to nanoparticles, on the temperature and concentration distributions with consideration of permeability and the heat source/sink.

An efficient analytical decomposition and numerical procedure for boundary layer flow on a continuous stretching surface

An efficient Adomian analytical decomposition technique for studying the momentum and heat boundary layer equations with exponentially stretching surface conditions was presented and an approximate analytical solution was obtained, which can be represented in terms of a rapid convergent power series with elegantly computable terms. The reliability and efficiency of the approximate solution were verified using numerical solutions in the literature. The approximate solution can be successfully applied to provide the values of skin friction and the temperature gradient coefficient.

Drag characteristics of power law fluids on an upstream moving surface

The specific problem to be considered here concerns the boundary layer problem of a non-Newtonian fluid on a flat plate in length, whose surface has a constant velocity opposite in the direction to that of the mainstream with Uw 〉〉 U∞, or alternatively when the plate surface velocity is kept fixed but the stream speed is reduced to zero. A theoretical analysis for a boundary layer flow is made and the self-similar equation is determined. Solutions are presented numerically for special power index and the associated transfer behavior is discussed.

Heat transfer characteristics of thin power-law liquid films over horizontal stretching sheet with internal heating and variable thermal coefficient

The effect of internal heating source on the film momentum and thermal transport characteristic of thin finite power-law liquids over an accelerating unsteady horizontal stretched interface is studied. Unlike most classical works in this field, a general surface temperature distribution of the liquid film and the generalized Fourier＇s law for varying thermal conductivity are taken into consideration. Appropriate similarity transformations are used to convert the strongly nonlinear governing partial differential equations （PDEs） into a boundary value problem with a group of two-point ordinary differential equations （ODEs）. The correspondence between the liquid film thickness and the unsteadiness parameter is derived with the BVP4C program in MATLAB. Numerical solutions to the self-similarity ODEs are obtained using the shooting technique combined with a Runge-Kutta iteration program and Newton＇s scheme. The effects of the involved physical parameters on the fluid＇s horizontal velocity and temperature distribution are presented and discussed.

Non-Newtonian biomagnetic fluid flow through a stenosed bifurcated artery with a slip boundary condition

The effects of a velocity slip and an external magnetic field on the flow of biomagnetic fluid(blood)through a stenosed bifurcated artery are investigated by using ANSYS FLUENT.Blood is regarded as a non-Newtonian power-law fluid,and the magnetization and electrical conductivity are considered in the mathematical model.The no-slip condition is replaced by the first-order slip condition.The slip boundary condition and magnetic force are compiled in the solver by the user-defined function(UDF).Numerical solutions are obtained by the finite volume method based on a nonuniform grid structure.The accuracy and efficiency of the solver are verified through a comparison with the literature.The results are presented graphically for different parameter values,and the effects of the magnetic number,the magnetic source position,the vascular obstruction ratio,the slip parameter,and the power-law index on the flow and temperature fields are illustrated.

Machine learning of synaptic structure with neurons to promote tumor growth

In this paper,we use machine learning techniques to form a cancer cell model that displays the growth and promotion of synaptic and electrical signals.Here,such a technique can be applied directly to the spiking neural network of cancer cell synapses.The results show that machine learning techniques for the spiked network of cancer cell synapses have the powerful function of neuron models and potential supervisors for different implementations.The changes in the neural activity of tumor microenvironment caused by synaptic and electrical signals are described.It can be used to cancer cells and tumor training processes of neural networks to reproduce complex spatiotemporal dynamics and to mechanize the association of excitatory synaptic structures which are between tumors and neurons in the brain with complex human health behaviors.

Mechanism from particle compaction to fluidization of liquid–solid two-phase flow

A new model of particle yield stress including cohesive strength is proposed,which considers the friction and cohesive strength between particles.A calculation method for the fluidization process of liquid–solid two-phase flow in compact packing state is given,and the simulation and experimental studies of fluidization process are carried out by taking the sand–water two-phase flow in the jet dredging system as an example,and the calculation method is verified.

Boundary layer flow on a moving surface in otherwise quiescent pseudo-plastic non-Newtonian fluids

A theoretical analysis for the boundary layer flow over a continuous moving surface in an otherwise quiescent pseudo-plastic non-Newtonian fluid medium was presented. The types of potential flows necessary for similar solutions to the boundary layer equations were determined and the solutions were numerically presented for different values of power law exponent.

Time–space dependent fractional boundary layer flow of Maxwell fluid over an unsteady stretching surface

Fractional boundary layer flow of Maxwell fluid on an unsteady stretching surface was investigated. Time-space dependent fractional derivatives are introduced into the constitutive equations of the fluid. We developed and solved the governing equations using explicit finite difference method and the L1- algorithm as well as shifted Grunwald-Letnikov formula. The effects of fractional parameters, relaxation parameter, Reynolds number, and unsteadiness parameter on the velocity behavior and characteristics of boundary layer thickness and skin friction were analyzed. Results obtained indicate that the behavior of boundary layer of viscoelastic fluid strongly depends on time-space fractional parameters. Increases of time fractional derivative parameter and relaxation parameter cause a decrease of velocity while boundary layer thickness increase, but the space fractional derivative parameter and fractional Reynolds number have the opposite effects.

Suitable Heat Transfer Model for Self-Similar Laminar Boundary Layer in Power Law Fluids

The classical power law non-Newtonian fluids energy boundary layer equation is proved improper to describe the self-similar heat transfer. A theoretical analysis for momentum and energy boundary layer transfer behavior is made and the full similarity heat boundary layer equation is developed, which may be characterized by a power law relationship between shear stress and velocity gradient with the Falkner-Skan equation as a special case. Both analytical and numerical solutions are presented for momentum and energy boundary layer equations by using the similarity transformation and shooting technique and the associated transfer characteristics are discussed.

Numerical Study of Thermal Boundary Layer on a Continuous Moving Surface in Power Law Fluids

这份报纸在连续移动表面上调查幂定律液体的流动和热转移。温度分发被认为热扩散性和流动和热转移的特征上的幂定律粘性的效果被分析数字地获得。结果证明热边界层的分发板的速度比率参数取决于不仅，而且在幂定律索引和液体的 Prandtl 数字上。

Momentum and Heat Transfer in Laminar Boundary Layer Behind Shock Wave

Analytical and numerical solutions are established for momentum and energy laminar boundary layer induced by a shock wave. The results indicated that skin friction σ decreases with increasing in velocity ratio ξ(1≤ξ【 6). For each specified ξ(1≤ξ【 6), temperature w(t) increases with increasing of Tw but decreases with Te , and for a range of t ∈[1,ξ], w(t) decreases with the increasing of t. Thermal diffusion increases with increasing of uw but decreases with increasing Ue.