Innovations of mining technologies were proposed by beneficial utilizations of unfavorable factors such as high geostress,high geotemperature and high mining depth to achieve green mining as mining depth increases ine...Innovations of mining technologies were proposed by beneficial utilizations of unfavorable factors such as high geostress,high geotemperature and high mining depth to achieve green mining as mining depth increases inevitably.Cuttability of deep hard rock was investigated by experimental and regressed analyses to find the reasonable stress adjustment method to improve non-explosive mechanized fragmentation for hard ore-rock.A non-explosive mechanized and intellectualized mining method was proposed to continuously and precisely exploit phosphate underground,which promoted the high-recovery,low-waste and high-efficiency exploitation of phosphate with recovery rate over 90%,dilution rate near 5%and cutting efficiency about 107.7 t/h.A circular economy model and the backfill system were proposed to conduct resource utilizations of solid waste,by which the utilization amount of waste increased year after year.In 2018,the utilization amounts of phosphogypsum,yellow phosphorus slag and waste rock increased to 1853.6×10^3 t/a,291.1×10^3 t/a and 1493.8×10^3 t/a,respectively.展开更多
To investigate the influence of the bedding angle,β,on the mechanical properties and rockburst proneness,uniaxial compression tests were conducted using cylindrical phyllite specimens with different bedding angles.Ac...To investigate the influence of the bedding angle,β,on the mechanical properties and rockburst proneness,uniaxial compression tests were conducted using cylindrical phyllite specimens with different bedding angles.According to the results,the peak stress,peak strain,cumulative acoustic emission counts,and potential energy of the elastic strain exhibited a U-shaped change trend.With an increase in β from 0°to 90°,the failure mode transformed from tensile splitting failure along the bedding plane to shear slip failure along the weak bedding plane.Finally,the failure mode evolved into a tensile splitting failure across the bedding plane.When β=15°,30°,and 45°,the phyllite specimens exhibited strong,slight,and moderate rockburst proneness,with strong,slight,and moderate shear slip rockbursts,respectively.When β=0°,60°,75°,and 90°,the phyllite specimens had extremely strong rockburst proneness,and an extremely strong strain rockburst occurred.展开更多
Rocks are likely to undergo spalling failure under dynamic loading.The fracture development and rock failure behaviours were investigated during dynamic tensile loading.Tests were conducted with a split-Hopkinson pres...Rocks are likely to undergo spalling failure under dynamic loading.The fracture development and rock failure behaviours were investigated during dynamic tensile loading.Tests were conducted with a split-Hopkinson pressure bar(SHPB)in four different impact loading conditions.Thin sections near failure surfaces were also made to evaluate the growth patterns of fractures observed by polarizing microscope.Scanning electron microscopy(SEM)was used to observe mineral grains on failure surfaces and to evaluate their response to loading and failure.The results indicate that the number of spalling cracks increases with increase in peak impact loads and that quartz sustains abundant intergranular fracturing.Cleavage planes and their direction relative to loading play a vital role in rock strength and fracturing.Separation along cleavage planes perpendicular to loading without the movement of micaceous minerals parallel to loading appears to be unique to the rock spalling process.展开更多
True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure p...True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure process and characteristics of a circular tunnel of surrounding rocks. The spalling failure under SWC can be divided into four periods: calm period, buckling deformation period, period of rock fragment gradual buckling and exfoliation, and period of formation of symmetrical V-shaped notches. When the horizontal axial and vertical stresses were constant, the spalling failure severity was reduced with the increase in lateral stress. Under natural water content, a strong rockburst with dynamic failure characteristics occurred on the circular hole sidewall. Under SWC, the failure severity was reduced and the circular hole sidewall experienced spalling failure, exhibiting progressive static failure characteristics.Therefore, water can reduce the failure severity of surrounding rocks in deep underground engineering, which has a certain guiding significance for the prevention and control of rockbursts.展开更多
To determine the relationship between slabbing failure and the specimen height-to-width(H/W)ratio and to analyze the conditions,characteristics,and mechanism of slabbing failure in the laboratory,uniaxial compression ...To determine the relationship between slabbing failure and the specimen height-to-width(H/W)ratio and to analyze the conditions,characteristics,and mechanism of slabbing failure in the laboratory,uniaxial compression tests were conducted using six groups of granite specimens.The entire failure process was recorded using strain gauges and high-speed cameras.The initiation and propagation of fractures in specimens were identified by analyzing the monitoring results of stress,strain,and acoustic emission.The experimental results show that changes in the specimen H/W ratio can transform the macro failure mode.When the H/W ratio is reduced to 0.5,the macro failure mode is dominated by slabbing.Low load-bearing ability is observed in specimens with slabbing failure,and the slabbing fractures are approximately parallel to the loading direction.Moreover,the fracture propagation characteristics and acoustic emission signals of slabbing failure specimens show typical tensile failure characteristics,indicating that slabbing failure is essentially a special tensile failure.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51927808,51904335,52174098)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2020zzts199)。
基金Projects(41630642,51904335,51904333)supported by the National Natural Science Foundation of China
文摘Innovations of mining technologies were proposed by beneficial utilizations of unfavorable factors such as high geostress,high geotemperature and high mining depth to achieve green mining as mining depth increases inevitably.Cuttability of deep hard rock was investigated by experimental and regressed analyses to find the reasonable stress adjustment method to improve non-explosive mechanized fragmentation for hard ore-rock.A non-explosive mechanized and intellectualized mining method was proposed to continuously and precisely exploit phosphate underground,which promoted the high-recovery,low-waste and high-efficiency exploitation of phosphate with recovery rate over 90%,dilution rate near 5%and cutting efficiency about 107.7 t/h.A circular economy model and the backfill system were proposed to conduct resource utilizations of solid waste,by which the utilization amount of waste increased year after year.In 2018,the utilization amounts of phosphogypsum,yellow phosphorus slag and waste rock increased to 1853.6×10^3 t/a,291.1×10^3 t/a and 1493.8×10^3 t/a,respectively.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(Nos.51904335,11972378,41630642)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2019zzts310).
文摘To investigate the influence of the bedding angle,β,on the mechanical properties and rockburst proneness,uniaxial compression tests were conducted using cylindrical phyllite specimens with different bedding angles.According to the results,the peak stress,peak strain,cumulative acoustic emission counts,and potential energy of the elastic strain exhibited a U-shaped change trend.With an increase in β from 0°to 90°,the failure mode transformed from tensile splitting failure along the bedding plane to shear slip failure along the weak bedding plane.Finally,the failure mode evolved into a tensile splitting failure across the bedding plane.When β=15°,30°,and 45°,the phyllite specimens exhibited strong,slight,and moderate rockburst proneness,with strong,slight,and moderate shear slip rockbursts,respectively.When β=0°,60°,75°,and 90°,the phyllite specimens had extremely strong rockburst proneness,and an extremely strong strain rockburst occurred.
基金the financial supports from the National Natural Science Foundation of China(Nos.51904335,51904333,11772357,51927808)。
文摘Rocks are likely to undergo spalling failure under dynamic loading.The fracture development and rock failure behaviours were investigated during dynamic tensile loading.Tests were conducted with a split-Hopkinson pressure bar(SHPB)in four different impact loading conditions.Thin sections near failure surfaces were also made to evaluate the growth patterns of fractures observed by polarizing microscope.Scanning electron microscopy(SEM)was used to observe mineral grains on failure surfaces and to evaluate their response to loading and failure.The results indicate that the number of spalling cracks increases with increase in peak impact loads and that quartz sustains abundant intergranular fracturing.Cleavage planes and their direction relative to loading play a vital role in rock strength and fracturing.Separation along cleavage planes perpendicular to loading without the movement of micaceous minerals parallel to loading appears to be unique to the rock spalling process.
基金financial support from the National Natural Science Foundation of China (Nos.51904335,41630642)。
文摘True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure process and characteristics of a circular tunnel of surrounding rocks. The spalling failure under SWC can be divided into four periods: calm period, buckling deformation period, period of rock fragment gradual buckling and exfoliation, and period of formation of symmetrical V-shaped notches. When the horizontal axial and vertical stresses were constant, the spalling failure severity was reduced with the increase in lateral stress. Under natural water content, a strong rockburst with dynamic failure characteristics occurred on the circular hole sidewall. Under SWC, the failure severity was reduced and the circular hole sidewall experienced spalling failure, exhibiting progressive static failure characteristics.Therefore, water can reduce the failure severity of surrounding rocks in deep underground engineering, which has a certain guiding significance for the prevention and control of rockbursts.
基金the National Natural Science Foundation of China(Nos.11972378,51904335,51927808)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2021zzts0282).
文摘To determine the relationship between slabbing failure and the specimen height-to-width(H/W)ratio and to analyze the conditions,characteristics,and mechanism of slabbing failure in the laboratory,uniaxial compression tests were conducted using six groups of granite specimens.The entire failure process was recorded using strain gauges and high-speed cameras.The initiation and propagation of fractures in specimens were identified by analyzing the monitoring results of stress,strain,and acoustic emission.The experimental results show that changes in the specimen H/W ratio can transform the macro failure mode.When the H/W ratio is reduced to 0.5,the macro failure mode is dominated by slabbing.Low load-bearing ability is observed in specimens with slabbing failure,and the slabbing fractures are approximately parallel to the loading direction.Moreover,the fracture propagation characteristics and acoustic emission signals of slabbing failure specimens show typical tensile failure characteristics,indicating that slabbing failure is essentially a special tensile failure.
