The Shen-Guang II Upgrade(SG-Ⅱ-U) laser facility consists of eight high-power nanosecond laser beams and one shortpulse picosecond petawatt laser. It is designed for the study of inertial confinement fusion(ICF), esp...The Shen-Guang II Upgrade(SG-Ⅱ-U) laser facility consists of eight high-power nanosecond laser beams and one shortpulse picosecond petawatt laser. It is designed for the study of inertial confinement fusion(ICF), especially for conducting fast ignition(FI) research in China and other basic science experiments. To perform FI successfully with hohlraum targets containing a golden cone, the long-pulse beam and cylindrical hohlraum as well as the short-pulse beam and cone target alignment must satisfy tight specifications(30 and 20 μm rms for each case). To explore new ICF ignition targets with six laser entrance holes(LEHs), a rotation sensor was adapted to meet the requirements of a three-dimensional target and correct beam alignment. In this paper, the strategy for aligning the nanosecond beam based on target alignment sensor(TAS) is introduced and improved to meet requirements of the picosecond lasers and the new six LEHs hohlraum targets in the SG-II-U facility. The expected performance of the alignment system is presented, and the alignment error is also discussed.展开更多
In high power laser facility for inertial confinement fusion research, final optics assembly(FOA) plays a critical role in the frequency conversion, beam focusing, color separation, beam sampling and debris shielding....In high power laser facility for inertial confinement fusion research, final optics assembly(FOA) plays a critical role in the frequency conversion, beam focusing, color separation, beam sampling and debris shielding. The design and performance of FOA in SG-II Upgrade laser facility are mainly introduced here. Due to the limited space and short focal length, a coaxial aspheric wedged focus lens is designed and applied in the FOA configuration. Then the ghost image analysis,the focus characteristic analysis, the B integral control design and the optomechanical design are carried out in the FOA design phase. In order to ensure the FOA performance, two key technologies are developed including measurement and adjustment technique of the wedged focus lens and the stray light management technique based on ground glass.Experimental results show that the design specifications including laser fluence, frequency conversion efficiency and perforation efficiency of the focus spot have been achieved, which meet the requirements of physical experiments well.展开更多
文摘The Shen-Guang II Upgrade(SG-Ⅱ-U) laser facility consists of eight high-power nanosecond laser beams and one shortpulse picosecond petawatt laser. It is designed for the study of inertial confinement fusion(ICF), especially for conducting fast ignition(FI) research in China and other basic science experiments. To perform FI successfully with hohlraum targets containing a golden cone, the long-pulse beam and cylindrical hohlraum as well as the short-pulse beam and cone target alignment must satisfy tight specifications(30 and 20 μm rms for each case). To explore new ICF ignition targets with six laser entrance holes(LEHs), a rotation sensor was adapted to meet the requirements of a three-dimensional target and correct beam alignment. In this paper, the strategy for aligning the nanosecond beam based on target alignment sensor(TAS) is introduced and improved to meet requirements of the picosecond lasers and the new six LEHs hohlraum targets in the SG-II-U facility. The expected performance of the alignment system is presented, and the alignment error is also discussed.
文摘In high power laser facility for inertial confinement fusion research, final optics assembly(FOA) plays a critical role in the frequency conversion, beam focusing, color separation, beam sampling and debris shielding. The design and performance of FOA in SG-II Upgrade laser facility are mainly introduced here. Due to the limited space and short focal length, a coaxial aspheric wedged focus lens is designed and applied in the FOA configuration. Then the ghost image analysis,the focus characteristic analysis, the B integral control design and the optomechanical design are carried out in the FOA design phase. In order to ensure the FOA performance, two key technologies are developed including measurement and adjustment technique of the wedged focus lens and the stray light management technique based on ground glass.Experimental results show that the design specifications including laser fluence, frequency conversion efficiency and perforation efficiency of the focus spot have been achieved, which meet the requirements of physical experiments well.
