Three-dimensional(3D)-printed scaffolds have attracted considerable attention in recent years as they provide a suitable environment for bone cell tissue regeneration and can be customized in shape.Among many other ch...Three-dimensional(3D)-printed scaffolds have attracted considerable attention in recent years as they provide a suitable environment for bone cell tissue regeneration and can be customized in shape.Among many other challenges,the material composition and geometric structure have major impacts on the performance of scaffolds.Hydroxyapatite and tricalcium phosphate(HA/TCP),as the major constituents of natural bone and teeth,possess attractive biological properties and are widely used in bone scaffold fabrication.Many fabrication methods have been investigated in attempts to achieve HA/TCP scaffolds with microporous structure enabling cell growth and nutrient transport.However,current 3D printing methods can only achieve the fabrication of HA/TCP scaffolds with certain range of microporous structure.To overcome this challenge,we developed a slurry-based microscale mask image projection stereolithography,allowing us to form a HA/TCP-based photocurable suspension with complex geometry including biomimetic features and hierarchical porosity.Here,the curing performance and physical properties of the HA/TCP suspension were investigated,and a circular movement process for the fabrication of highly viscous HA/TCP suspension was developed.Based on these investigations,the scaffold composition was optimized.We determined that a 30 wt%HA/TCP scaffold with biomimetic hierarchical structure exhibited superior mechanical properties and porosity.Cell proliferation was investigated in vitro,and the surgery was conducted in a nude mouse in vivo model of long bone with cranial neural crest cells and bone marrow mesenchymal stem cells.The results showed our 3D-printed HA/TCP scaffold with biomimetic hierarchical structure is biocompatible and has sufficient mechanical strength for surgery.展开更多
Additive manufacturing(AM),also known as three-dimensional(3D)printing,is thriving as an effective and robust method in fabricating architected piezoelectric structures,yet most of the commonly adopted printing techni...Additive manufacturing(AM),also known as three-dimensional(3D)printing,is thriving as an effective and robust method in fabricating architected piezoelectric structures,yet most of the commonly adopted printing techniques often face the inherent speed-accuracy trade-off,limiting their speed in manufacturing sophisticated parts containing micro-/nanoscale features.Herein,stabilized,photo-curable resins comprising chemically functionalized piezoelectric nanoparticles(PiezoNPs)were formulated,from which microscale architected 3D piezoelectric structures were printed continuously via micro continuous liquid interface production(μCLIP)at speeds of up to~60μm s^(-1),which are more than 10 times faster than the previously reported stereolithography-based works.The 3D-printed functionalized barium titanate(f-BTO)composites reveal a bulk piezoelectric charge constant d33 of 27.70 pC N^(-1) with the 30 wt%f-BTO.Moreover,rationally designed lattice structures that manifested enhanced,tailorable piezoelectric sensing performance as well as mechanical flexibility were tested and explored in diverse flexible and wearable self-powered sensing applications,e.g.,motion recognition and respiratory monitoring.展开更多
基金supported by the Alfred E.Mann Institute at University of Southern California as a grant to Yang Chai and Yong Chenthe support of National Science Foundation(NSF)grants 1151191 and 1335476the Core Center of Excellence in Nano Imaging(CNI)at USC for the use of microscopic measuring equipment.
文摘Three-dimensional(3D)-printed scaffolds have attracted considerable attention in recent years as they provide a suitable environment for bone cell tissue regeneration and can be customized in shape.Among many other challenges,the material composition and geometric structure have major impacts on the performance of scaffolds.Hydroxyapatite and tricalcium phosphate(HA/TCP),as the major constituents of natural bone and teeth,possess attractive biological properties and are widely used in bone scaffold fabrication.Many fabrication methods have been investigated in attempts to achieve HA/TCP scaffolds with microporous structure enabling cell growth and nutrient transport.However,current 3D printing methods can only achieve the fabrication of HA/TCP scaffolds with certain range of microporous structure.To overcome this challenge,we developed a slurry-based microscale mask image projection stereolithography,allowing us to form a HA/TCP-based photocurable suspension with complex geometry including biomimetic features and hierarchical porosity.Here,the curing performance and physical properties of the HA/TCP suspension were investigated,and a circular movement process for the fabrication of highly viscous HA/TCP suspension was developed.Based on these investigations,the scaffold composition was optimized.We determined that a 30 wt%HA/TCP scaffold with biomimetic hierarchical structure exhibited superior mechanical properties and porosity.Cell proliferation was investigated in vitro,and the surgery was conducted in a nude mouse in vivo model of long bone with cranial neural crest cells and bone marrow mesenchymal stem cells.The results showed our 3D-printed HA/TCP scaffold with biomimetic hierarchical structure is biocompatible and has sufficient mechanical strength for surgery.
文摘Additive manufacturing(AM),also known as three-dimensional(3D)printing,is thriving as an effective and robust method in fabricating architected piezoelectric structures,yet most of the commonly adopted printing techniques often face the inherent speed-accuracy trade-off,limiting their speed in manufacturing sophisticated parts containing micro-/nanoscale features.Herein,stabilized,photo-curable resins comprising chemically functionalized piezoelectric nanoparticles(PiezoNPs)were formulated,from which microscale architected 3D piezoelectric structures were printed continuously via micro continuous liquid interface production(μCLIP)at speeds of up to~60μm s^(-1),which are more than 10 times faster than the previously reported stereolithography-based works.The 3D-printed functionalized barium titanate(f-BTO)composites reveal a bulk piezoelectric charge constant d33 of 27.70 pC N^(-1) with the 30 wt%f-BTO.Moreover,rationally designed lattice structures that manifested enhanced,tailorable piezoelectric sensing performance as well as mechanical flexibility were tested and explored in diverse flexible and wearable self-powered sensing applications,e.g.,motion recognition and respiratory monitoring.