Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes, paint pigments, manufacturing units etc. Chromium exists in a...Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes, paint pigments, manufacturing units etc. Chromium exists in aqueous systems in both trivalent (Cr 3+) and hexavalent (Cr 6+) forms. The hexavalent form is carcinogenic and toxic to aquatic life, whereas Cr 3+ is however comparatively less toxic. This study was undertaken to investigate the total chromium removal from industrial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation. The study was conducted in four phases. In phase Ⅰ, the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected. As a result, pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively. Phase Ⅱ showed that lower dose of sodium meta bisulfate was sufficient to obtain 100 % efficiency in reducing Cr 6+ to Cr 3+, and it was noted that reaction time had no significance in the whole process. A design curve for reduction process was established which can act as a tool for treatment of industrial effluents. Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr 3+ to chromium hydroxide by using lime. An efficiency of 100 % was achievable and a settling time of 30 minutes produced clear effluent. Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries, when precipitated at pH of 12 gave 100 % efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.展开更多
Spectroscopic emission of lead plasma, generated by the fundamental （1064 nm） and second harmonics （532 nm） of a Q-switched pulsed Nd： YAG laser, is studied. The spectral lines of neutral atoms and singly ionized...Spectroscopic emission of lead plasma, generated by the fundamental （1064 nm） and second harmonics （532 nm） of a Q-switched pulsed Nd： YAG laser, is studied. The spectral lines of neutral atoms and singly ionized lead ions were shown predominantly. The profiles of neutral lead lines observed were used to extract the excitation temperature using Boltzmann plots, whereas electron number density was determined from the profile of Stark broadened line. The variations of excitation temperature and electron number density as a function of laser energy were studied.展开更多
文摘Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes, paint pigments, manufacturing units etc. Chromium exists in aqueous systems in both trivalent (Cr 3+) and hexavalent (Cr 6+) forms. The hexavalent form is carcinogenic and toxic to aquatic life, whereas Cr 3+ is however comparatively less toxic. This study was undertaken to investigate the total chromium removal from industrial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation. The study was conducted in four phases. In phase Ⅰ, the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected. As a result, pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively. Phase Ⅱ showed that lower dose of sodium meta bisulfate was sufficient to obtain 100 % efficiency in reducing Cr 6+ to Cr 3+, and it was noted that reaction time had no significance in the whole process. A design curve for reduction process was established which can act as a tool for treatment of industrial effluents. Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr 3+ to chromium hydroxide by using lime. An efficiency of 100 % was achievable and a settling time of 30 minutes produced clear effluent. Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries, when precipitated at pH of 12 gave 100 % efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.
基金financially supported by the Higher Education Commission (HEC) and Pakistan Science Foundation (PSF-134)MCS, National University of Sciences & Technology (NUST) for encouragement in terms of provision of time and financial support to carry out research work
文摘Spectroscopic emission of lead plasma, generated by the fundamental （1064 nm） and second harmonics （532 nm） of a Q-switched pulsed Nd： YAG laser, is studied. The spectral lines of neutral atoms and singly ionized lead ions were shown predominantly. The profiles of neutral lead lines observed were used to extract the excitation temperature using Boltzmann plots, whereas electron number density was determined from the profile of Stark broadened line. The variations of excitation temperature and electron number density as a function of laser energy were studied.
