Transient swelling-induced finite bending of hydrogel-based bilayers:analytical and FEM approaches

Hydrogels with their time-dependent intrinsic behaviors have recently been used widely in soft structures as sensors/actuators.One of the most interesting structures is the bilayer made up of hydrogels which may undergo swelling-induced bending.In this work,by proposing a semi-analytical method,the transient bending of hydrogel-based bilayers is investigated.Utilizing nonlinear solid mechanics,a robust semi-analytical solution is developed which captures the transient finite bending of hydrogel-based bilayers.Moreover,the multiphysics model of the hydrogels is implemented in the finite element method(FEM) framework to verify the developed semi-analytical procedure results.The effects of different material properties are investigated to illustrate the nonlinear behavior of these structures.The von-Mises stress contour extracted from FEM shows that the critical area of these soft structures is at the interface of the layers which experiences the maximum stress,and this area is most likely to rupture in large deformations.

An investigation on multilayer shape memory polymers under finite bending through nonlinear thermo-visco-hyperelasticity

This study presents a semi-analytical solution to describe the behavior of shape memory polymers(SMPs) based on the nonlinear thermo-visco-hyperelasticity which originates from the concepts of internal state variables and rational thermodynamics.This method is developed for the finite bending of multilayers in a dual-shape memory effect(SME) cycle.The layer number and layering order are investigated for two different SMPs and a hyperelastic material.In addition to the semi-analytical solution,the finite element simulation is performed to verify the predicted results,where the outcomes demonstrate the excellent accuracy of the proposed solution for predicting the behavior of the multilayer SMPs.Since this method has a much lower computational cost than the finite element method(FEM),it can be used as an effective tool to analyze the SMP behavior under different conditions,including different materials,different geometries,different layer numbers,and different layer arrangements.

Vibration analysis of FG annular sector in moderately thick plates with two piezoelectric layers

Free vibration of functionally graded (FG) annular sector plates embedded with two piezoelectric layers is studied with a generalized differential quadrature (GDQ) method. Based on the first-order shear deformation (FSD) plate theory and Hamilton’s principle with parameters satisfying Maxwell’s electrostatics equation in the piezoelectric layers, governing equations of motion are developed. Both open and closed circuit (shortly connected) boundary conditions on the piezoelectric surfaces, which are respective conditions for sensors and actuators, are accounted for. It is observed that the open circuit condition gives higher natural frequencies than a shortly connected condition. For the simulation of the potential electric function in piezoelectric layers, a sinusoidal function in the transverse direction is considered. It is assumed that properties of the FG material (FGM) change continuously through the thickness according to a power distribution law. The fast rate convergence and accuracy of the GDQ method with a small number of grid points are demonstrated through some numerical examples. With various combinations of free, clamped, and simply supported boundary conditions, the effects of the thicknesses of piezoelectric layers and host plate, power law index of FGMs, and plate geometrical parameters (e.g., angle and radii of annular sector) on the in-plane and out-of-plane nat-ural frequencies for different FG and piezoelectric materials are also studied. Results can be used to predict the behaviors of FG and piezoelectric materials in mechanical systems.

Swelling-induced finite bending of functionally graded pH-responsive hydrogels:a semi-analytical method

Recently, pH-sensitive hydrogels have been utilized in the diverse applications including sensors, switches, and actuators. In order to have continuous stress and deformation ?elds, a new semi-analytical approach is developed to predict the swelling induced?nite bending for a functionally graded(FG) layer composed of a pH-sensitive hydrogel,in which the cross-link density is continuously distributed along the thickness direction under the plane strain condition. Without considering the intermediary virtual reference,the initial state is mapped into the deformed con?guration in a circular shape by utilizing a total deformation gradient tensor stemming from the inhomogeneous swelling of an FG layer in response to the variation of the pH value of the solvent. To enlighten the capability of the presented analytical method, the ?nite element method(FEM) is used to verify the accuracy of the analytical results in some case studies. The perfect agreement con-?rms the accuracy of the presented method. Due to the applicability of FG pH-sensitive hydrogels, some design factors such as the semi-angle, the bending curvature, the aspect ratio, and the distributions of deformation and stress ?elds are studied. Furthermore, the tangential free-stress axes are illustrated in deformed con?guration.

Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion

The swelling behavior of a temperature-sensitive poly-N-isopropylacrylamide(PNIPAM) hydrogel circular cylinder is studied subjected to combined extension-torsion and varied temperature. In this regard, a semi-analytical solution is proposed for general combined loading. A finite element(FE) analysis is conducted, subjecting a hydrogel cylinder to the combined extension-torsion and the varied temperature to evaluate the validity and accuracy of the solution. A user-defined UHYPER subroutine is developed and verified under free and constrained swelling conditions. The FE results illustrate excellent agreement with the semi-analytical solution. Due to the complexity of the problem, some compositions and applied loading factors are analyzed. It is revealed that for larger cross-linked density and larger ending temperature, the cylinder yields higher stresses and smaller radial swelling deformation. Besides, the radial and hoop stresses increase by applying larger twist and axial stretch. The hoop stresses intersect at approximately R/Rout = 0.58, where the hoop stress vanishes. Besides, the axial force has direct and inverse relationships with the axial stretch and the twist, respectively. However, the resultant torsional moment behavior is complex, and the position of the maximum point varies significantly by altering the axial stretch and the twist.

Design and fluid-structure interaction analysis for a microfluidic T-junction with chemo-responsive hydrogel valves

Due to the deformation ability even under small loads, hydrogels have been widely used as a type of soft materials in various applications such as actuating and sensing, and have attracted many researchers to study their behaviors. In this paper, the behavior of hydrogel micro-valves with reverse sensitivity to the p H inside a T-junction flow sorter is investigated. With the fluid-structure interaction(FSI) approach, the effects of various parameters such as the inlet pressure and the p H value on the stress and deformation of the micro-valves are examined, and the results with and without FSI,including the flow rate and the closure p H, are compared. In order to reduce the response time of hydrogels, the effects of three different patterns on the performance of the microvalves are explored. Eventually, it is concluded that FSI is a key influential factor in designing and analyzing the behaviors of hydrogels.