Some effective parameters on the copper extraction from Kiire chalcopyrite concentrate were optimized by using response surface methodology （RSM）. Experiments designed by RSM were carried out in the presence of ammo...Some effective parameters on the copper extraction from Kiire chalcopyrite concentrate were optimized by using response surface methodology （RSM）. Experiments designed by RSM were carried out in the presence of ammonium persulfate （APS） and different types of impeller in an autoclave system. Ammonium persulfate concentration and leaching temperature were defined numerically and three types of impellers were defined categorically as independent variables using experimental design software. The optimum condition for copper extraction from the chalcopyrite concentrate is found to be ammonium persulfate concentration of 277.77 kg/m3, leaching temperature of 389.98 K and wheel type of impeller. The proposed model equation using RSM has shown good agreement with the experimental data, with correlation coefficients R2 and RaZaj for the model as 0.89 and 0.84, respectively.展开更多
The reduction of Cr（Ⅵ） in aqueous solution by using bauxite ore was investigated.Experimental results for Cr（Ⅵ）reduction in aqueous solution depending on some factors such as time,sulfuric acid amount,bauxite do...The reduction of Cr（Ⅵ） in aqueous solution by using bauxite ore was investigated.Experimental results for Cr（Ⅵ）reduction in aqueous solution depending on some factors such as time,sulfuric acid amount,bauxite dosage,initial Cr（Ⅵ）concentration,formic acid concentration,daylight and temperature were presented.The obtained results show that sulfuric acid amount,bauxite dosage and initial Cr（Ⅵ） concentration of solution are most effective parameters on the reduction process.Also,it has been found that the 60 g/L of bauxite dosage is sufficient to reduce up to 100% of Cr（Ⅵ） from acidic solution under the condition of low initial Cr（Ⅵ） mass concentrations such as 10 mg/L.The reduction reaction is completed within 30 min at 25 ℃ under the experimental conditions：bauxite dosage of 60 g/L,amount of sulfuric acid 40-60 stoichiometric and initial mass concentration of Cr（Ⅵ）,10 mg/L.It was determined that reduction percentage is decreasing with increasing initial Cr（Ⅵ） concentration.The chemical oxygen demand of bauxite ore was found to be 26 mg COD/g.展开更多
基金supported by the TUBITAK(Scientific and Technological Research Council of Turkey) under the Project No:106M177
文摘Some effective parameters on the copper extraction from Kiire chalcopyrite concentrate were optimized by using response surface methodology （RSM）. Experiments designed by RSM were carried out in the presence of ammonium persulfate （APS） and different types of impeller in an autoclave system. Ammonium persulfate concentration and leaching temperature were defined numerically and three types of impellers were defined categorically as independent variables using experimental design software. The optimum condition for copper extraction from the chalcopyrite concentrate is found to be ammonium persulfate concentration of 277.77 kg/m3, leaching temperature of 389.98 K and wheel type of impeller. The proposed model equation using RSM has shown good agreement with the experimental data, with correlation coefficients R2 and RaZaj for the model as 0.89 and 0.84, respectively.
文摘The reduction of Cr（Ⅵ） in aqueous solution by using bauxite ore was investigated.Experimental results for Cr（Ⅵ）reduction in aqueous solution depending on some factors such as time,sulfuric acid amount,bauxite dosage,initial Cr（Ⅵ）concentration,formic acid concentration,daylight and temperature were presented.The obtained results show that sulfuric acid amount,bauxite dosage and initial Cr（Ⅵ） concentration of solution are most effective parameters on the reduction process.Also,it has been found that the 60 g/L of bauxite dosage is sufficient to reduce up to 100% of Cr（Ⅵ） from acidic solution under the condition of low initial Cr（Ⅵ） mass concentrations such as 10 mg/L.The reduction reaction is completed within 30 min at 25 ℃ under the experimental conditions：bauxite dosage of 60 g/L,amount of sulfuric acid 40-60 stoichiometric and initial mass concentration of Cr（Ⅵ）,10 mg/L.It was determined that reduction percentage is decreasing with increasing initial Cr（Ⅵ） concentration.The chemical oxygen demand of bauxite ore was found to be 26 mg COD/g.
