We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexib...We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexible polyimide(PI)substrate and a planar spiral inductance coil(thickness 300 nm),made using micro-electro-mechanical system(MEMS)technology.It can be bent or folded at will,and can be attached firmly to the surface of objects with a bending structure.The principle of radio frequency wireless transmission is used to measure the acceleration signal by changing the distance between the accelerometer and the antenna.Compared with other accelerometers with a lead wire,the accelerometer can prevent the lead from falling off in the course of vibration,thereby prolonging its service life.Through establishment of an experimental platform,when the distance between the antenna and accelerometer was 5 mm,the characterization of the surface of bending structures demonstrated the sensing capabilities of the accelerometer at accelerations of 20-100 m/s2.The results indicate that the acceleration and peak-to-peak output voltage were nearly linear,with accelerometer sensitivity reaching 0.27 mV/(m·s-2).Moreover,the maximum error of the accelerometer was less than 0.037%.展开更多
基金Project supported by the China Aviation Development Group IndustryUniversity-Research Cooperation Project(No.HFZL2020CXY019)the Fundamental Research Program of Shanxi Province,China(No.20210302123024)the National Natural Science Foundation of China(No.51821003)。
文摘We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexible polyimide(PI)substrate and a planar spiral inductance coil(thickness 300 nm),made using micro-electro-mechanical system(MEMS)technology.It can be bent or folded at will,and can be attached firmly to the surface of objects with a bending structure.The principle of radio frequency wireless transmission is used to measure the acceleration signal by changing the distance between the accelerometer and the antenna.Compared with other accelerometers with a lead wire,the accelerometer can prevent the lead from falling off in the course of vibration,thereby prolonging its service life.Through establishment of an experimental platform,when the distance between the antenna and accelerometer was 5 mm,the characterization of the surface of bending structures demonstrated the sensing capabilities of the accelerometer at accelerations of 20-100 m/s2.The results indicate that the acceleration and peak-to-peak output voltage were nearly linear,with accelerometer sensitivity reaching 0.27 mV/(m·s-2).Moreover,the maximum error of the accelerometer was less than 0.037%.
