The aim of this study was to elucidate the mode of action of two antimicrobial compounds, nisin, which is hydrophilic, and the lipophilic compound carvacrol. For that purpose, both antimicrobials were loaded into Oil-...The aim of this study was to elucidate the mode of action of two antimicrobial compounds, nisin, which is hydrophilic, and the lipophilic compound carvacrol. For that purpose, both antimicrobials were loaded into Oil-in-/Water nanoemulsions, and their antimicrobial activity against Bacillus subtilis was investigated. The experimental results indicated that the O/W nanoemulsions loaded with both, nisin and carvacrol, having Sauter mean diameter （d3,2） of around 120 nm, were considerably stable under the conditions investigated （up to 1 week storage at room temperature）. The interfacial tension between nisin aqueous solutions and soybean oil could be reduced up to 12 mN/m, as compared to that of pure water and soybean oil （21 mN/m）, so that demonstrating the potential of nisin to be used as emulsifier. The results obtained for O/W nanoemulsions loaded with both antimicrobial compounds indicated a reduction of nearly two log cycles （around 100 times） on B. subtilis population upon incubation for 24 h, compared to the blank （10 mM phosphate buffer）.展开更多
The primary interest to this study was to investigate the effect of milling parameters on the size of hydrophobically modified starch particles, aiming to produce small, uniformly sized modified starch microspheres. O...The primary interest to this study was to investigate the effect of milling parameters on the size of hydrophobically modified starch particles, aiming to produce small, uniformly sized modified starch microspheres. Octie, a commercial product originated from cornstarch modified using Octenyl Succinate Anhydride （OSA）, was dispersed （3 wt%） using different media （water or ethanol） and subsequently wet-milled using a beads mill with zirconium beads at a rotation of 6,000 rpm up to 30 min. It was found that milling Octie in water dispersion for 3 min resulted in the smallest mean particle size （2.04 i 0.91 ktm）, compared to unmilled modified starch granules （15.2 ~ 6.0 lam）. Granular size and morphology changed considerably with further milling. For instance, very dense clusters with variable particle sizes （20.6 ~ 10.0 lam） were obtained after 30 min milling. As depicted by Scanning Electronic Microscopy, a large number of particles were apparently flattened during the milling process rather than broken, forming aggregates. Ultimately, within the range of experimental conditions tested, production of sub-micron modified starch particles was not possible.展开更多
文摘The aim of this study was to elucidate the mode of action of two antimicrobial compounds, nisin, which is hydrophilic, and the lipophilic compound carvacrol. For that purpose, both antimicrobials were loaded into Oil-in-/Water nanoemulsions, and their antimicrobial activity against Bacillus subtilis was investigated. The experimental results indicated that the O/W nanoemulsions loaded with both, nisin and carvacrol, having Sauter mean diameter （d3,2） of around 120 nm, were considerably stable under the conditions investigated （up to 1 week storage at room temperature）. The interfacial tension between nisin aqueous solutions and soybean oil could be reduced up to 12 mN/m, as compared to that of pure water and soybean oil （21 mN/m）, so that demonstrating the potential of nisin to be used as emulsifier. The results obtained for O/W nanoemulsions loaded with both antimicrobial compounds indicated a reduction of nearly two log cycles （around 100 times） on B. subtilis population upon incubation for 24 h, compared to the blank （10 mM phosphate buffer）.
文摘The primary interest to this study was to investigate the effect of milling parameters on the size of hydrophobically modified starch particles, aiming to produce small, uniformly sized modified starch microspheres. Octie, a commercial product originated from cornstarch modified using Octenyl Succinate Anhydride （OSA）, was dispersed （3 wt%） using different media （water or ethanol） and subsequently wet-milled using a beads mill with zirconium beads at a rotation of 6,000 rpm up to 30 min. It was found that milling Octie in water dispersion for 3 min resulted in the smallest mean particle size （2.04 i 0.91 ktm）, compared to unmilled modified starch granules （15.2 ~ 6.0 lam）. Granular size and morphology changed considerably with further milling. For instance, very dense clusters with variable particle sizes （20.6 ~ 10.0 lam） were obtained after 30 min milling. As depicted by Scanning Electronic Microscopy, a large number of particles were apparently flattened during the milling process rather than broken, forming aggregates. Ultimately, within the range of experimental conditions tested, production of sub-micron modified starch particles was not possible.
