Development of simple methods for preparation of polymeric electrode materials with nanofibrous network structure is a perspective way toward cheap supercapacitors with high specific capacitance and energy density. In...Development of simple methods for preparation of polymeric electrode materials with nanofibrous network structure is a perspective way toward cheap supercapacitors with high specific capacitance and energy density. In this work one-pot synthesis of electroactive ternary composite based on polypyrrole, polyacrylamide and chitin nanofibers with beneficial morphology was elaborated. Ternary system demonstrates better electrochemical performance in comparison with both polypyrrole–polyacrylamide and polypyrrole–chitin binary composites. Possible mechanism of synergistic effect of simultaneous influence of polyacrylamide and chitin nanofibers on the formation of composite＇s structure is discussed.The highest attained specific capacitance of electroactive polypyrrole in ternary composite reached 249 F/g at 0.5 A/g and 150 F/g at 32 A/g. Symmetrical supercapacitor was assembled using the elaborated electrode material. High specific capacitance 89 F/g and good cycling stability with capacitance retention of 90% after 3000 cycles at 2 A/g were measured.展开更多
Green method for preparation of ion-conducting membranes(ICM) based on bacterial cellulose nanofibers(CNF) modified by a copolymer of sodium acrylate and 2-acrylamido-2-methylpropanesulfonic acid was elaborated. FTIR ...Green method for preparation of ion-conducting membranes(ICM) based on bacterial cellulose nanofibers(CNF) modified by a copolymer of sodium acrylate and 2-acrylamido-2-methylpropanesulfonic acid was elaborated. FTIR and NMR data confirmed grafting of polyacrylate onto cellulose surface. Formation of porous structure of the ICM was controlled by SEM and AFM. The maximal ionic conductivity of the membranes reaches 1.5 and 3.1 mS·cm^(-1)(60 ℃ and 98% relative humidity) when they are saturated with water or H_2SO_4(1 mol·L^(-1)) electrolyte,respectively. Prepared ICM was tested as a separator in a symmetrical supercapacitor with electrodes based on polyaniline hydrogel. The assembled cell demonstrate ability to operate at high current density up to 100 A·g^(-1) maintaining specific capacitance 165 F·g^(-1). Maximal specific capacitance of 289 F·g^(-1) was achieved at current density 1 A·g^(-1). Retaining of 90% of initial capacitance after 10000 of charge-discharge cycles proves high electrochemical stability of prepared ICM.展开更多
基金supported by Russian Foundation(grant 16-13-10164)financial support of Russian Ministry of Education within State Contract 14.W03.31.0014(megagrant)
文摘Development of simple methods for preparation of polymeric electrode materials with nanofibrous network structure is a perspective way toward cheap supercapacitors with high specific capacitance and energy density. In this work one-pot synthesis of electroactive ternary composite based on polypyrrole, polyacrylamide and chitin nanofibers with beneficial morphology was elaborated. Ternary system demonstrates better electrochemical performance in comparison with both polypyrrole–polyacrylamide and polypyrrole–chitin binary composites. Possible mechanism of synergistic effect of simultaneous influence of polyacrylamide and chitin nanofibers on the formation of composite＇s structure is discussed.The highest attained specific capacitance of electroactive polypyrrole in ternary composite reached 249 F/g at 0.5 A/g and 150 F/g at 32 A/g. Symmetrical supercapacitor was assembled using the elaborated electrode material. High specific capacitance 89 F/g and good cycling stability with capacitance retention of 90% after 3000 cycles at 2 A/g were measured.
文摘Green method for preparation of ion-conducting membranes(ICM) based on bacterial cellulose nanofibers(CNF) modified by a copolymer of sodium acrylate and 2-acrylamido-2-methylpropanesulfonic acid was elaborated. FTIR and NMR data confirmed grafting of polyacrylate onto cellulose surface. Formation of porous structure of the ICM was controlled by SEM and AFM. The maximal ionic conductivity of the membranes reaches 1.5 and 3.1 mS·cm^(-1)(60 ℃ and 98% relative humidity) when they are saturated with water or H_2SO_4(1 mol·L^(-1)) electrolyte,respectively. Prepared ICM was tested as a separator in a symmetrical supercapacitor with electrodes based on polyaniline hydrogel. The assembled cell demonstrate ability to operate at high current density up to 100 A·g^(-1) maintaining specific capacitance 165 F·g^(-1). Maximal specific capacitance of 289 F·g^(-1) was achieved at current density 1 A·g^(-1). Retaining of 90% of initial capacitance after 10000 of charge-discharge cycles proves high electrochemical stability of prepared ICM.
