Road transport exhaust emissions represent the main sources of atmospheric pollution in urban areas, due to the growing number of circulating vehicles and travelled distances. In order to reduce this pollution source,...Road transport exhaust emissions represent the main sources of atmospheric pollution in urban areas, due to the growing number of circulating vehicles and travelled distances. In order to reduce this pollution source, stricter emission standards are periodically set by governments through- out the world. Consequently, the concentrations of gaseous pollutants and particulate mass to be measured during type-approval tests of new vehicles are becoming progressively lower;moreover from 2011, diesel cars have to comply with particle number limit. In order to assess emission levels of different technology vehicles and investigate the use of a particulate number measurement technique at the exhaust of very low-emitting vehicles, an experimental activity was carried out on three in-use vehicles: a diesel car equipped with a particulate trap (DPF), a hybrid gasoline-elec- tric car and a bi-fuel passenger car fuelled with compressed natural gas (CNG). Cold and hot gaseous and particulate emission factors and fuel consumption were measured during the execution of real and regulatory driving cycles on a chassis dynamometer. Particulate was characterized in terms of mass only for the diesel car and of particle number for all vehicles. The emissions measured over the NEDC show that all three vehicles comply with their standard limits, except CO for CNG passenger car and NOx for diesel car. Cold start influences CO and HC emissions and fuel consumption for all the tested vehicles and in particular for the hybrid car. The real driving cycle is the most critical pattern for the emissions of almost all pollutants. During constant speed tests, the emissions of particles of hybrid car are an order of magnitude lower than those of the CNG car.展开更多
文摘Road transport exhaust emissions represent the main sources of atmospheric pollution in urban areas, due to the growing number of circulating vehicles and travelled distances. In order to reduce this pollution source, stricter emission standards are periodically set by governments through- out the world. Consequently, the concentrations of gaseous pollutants and particulate mass to be measured during type-approval tests of new vehicles are becoming progressively lower;moreover from 2011, diesel cars have to comply with particle number limit. In order to assess emission levels of different technology vehicles and investigate the use of a particulate number measurement technique at the exhaust of very low-emitting vehicles, an experimental activity was carried out on three in-use vehicles: a diesel car equipped with a particulate trap (DPF), a hybrid gasoline-elec- tric car and a bi-fuel passenger car fuelled with compressed natural gas (CNG). Cold and hot gaseous and particulate emission factors and fuel consumption were measured during the execution of real and regulatory driving cycles on a chassis dynamometer. Particulate was characterized in terms of mass only for the diesel car and of particle number for all vehicles. The emissions measured over the NEDC show that all three vehicles comply with their standard limits, except CO for CNG passenger car and NOx for diesel car. Cold start influences CO and HC emissions and fuel consumption for all the tested vehicles and in particular for the hybrid car. The real driving cycle is the most critical pattern for the emissions of almost all pollutants. During constant speed tests, the emissions of particles of hybrid car are an order of magnitude lower than those of the CNG car.
