Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by emp...Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by employing the stir casting method.The structural properties of the produced samples were then investigated by optical microscopy and scanning electron microscopy;their mechanical properties were also addressed by hardness and tensile tests.The results showed that adding 1 vol.%TiO2 nanoparticles reduced the grain size and dendrite arm spacing by about 66%and 31%,respectively.Also,hardness,ultimate tensile strength,yield strength,and elongation of AA2024−1vol.%TiO2(np)composite were increased by about 25%,28%,4%and 163%,respectively,as compared to those of the monolithic component.The agglomerations of nanoparticles in the structure of nanocomposites were found to be a factor weakening the strength against the strengthening mechanisms.Some agglomerations of nanoparticles in the matrix were detected on the fractured surfaces of the tension test specimens.展开更多
The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and the...The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and their interac- tions on ultimate tensile strength of weldments. The shielded metal arc welding （SMAW） process was used with two types of consumables （E7018 and ENi-CI） under eight different conditions using as-cast samples. The microstructur- al evolution and fracture mechanisms were investigated by optical microscopy and scanning electron microscopy （SEM）, respectively. The hardness, tensile and impact tests were also performed to determine the weld quality. Based on experiment design, preheat, consumable, cooling condition, preheat cooling and preheat-consumable inter- actions were significant factors. Preheat is the most effective factor and in the case of E7018, preheat and cooling conditions were the most sensible factors. It was found that buttering was the most appropriate welding method for ferritic ductile cast iron.展开更多
文摘Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by employing the stir casting method.The structural properties of the produced samples were then investigated by optical microscopy and scanning electron microscopy;their mechanical properties were also addressed by hardness and tensile tests.The results showed that adding 1 vol.%TiO2 nanoparticles reduced the grain size and dendrite arm spacing by about 66%and 31%,respectively.Also,hardness,ultimate tensile strength,yield strength,and elongation of AA2024−1vol.%TiO2(np)composite were increased by about 25%,28%,4%and 163%,respectively,as compared to those of the monolithic component.The agglomerations of nanoparticles in the structure of nanocomposites were found to be a factor weakening the strength against the strengthening mechanisms.Some agglomerations of nanoparticles in the matrix were detected on the fractured surfaces of the tension test specimens.
文摘The weldability of a ferritic ductile cast iron was investigated as a function of different consumables and welding conditions. A 23 full factorial experimental design was used to analyze the effect of factors and their interac- tions on ultimate tensile strength of weldments. The shielded metal arc welding （SMAW） process was used with two types of consumables （E7018 and ENi-CI） under eight different conditions using as-cast samples. The microstructur- al evolution and fracture mechanisms were investigated by optical microscopy and scanning electron microscopy （SEM）, respectively. The hardness, tensile and impact tests were also performed to determine the weld quality. Based on experiment design, preheat, consumable, cooling condition, preheat cooling and preheat-consumable inter- actions were significant factors. Preheat is the most effective factor and in the case of E7018, preheat and cooling conditions were the most sensible factors. It was found that buttering was the most appropriate welding method for ferritic ductile cast iron.
