This paper reports a study of the addition effects of either titanium or titanium and nitrogen of steel grade DIN 56NiCrMoV7 on mechanical properties. Three steel grades were produced in 30 kg-induction furnace, one c...This paper reports a study of the addition effects of either titanium or titanium and nitrogen of steel grade DIN 56NiCrMoV7 on mechanical properties. Three steel grades were produced in 30 kg-induction furnace, one conforms the chemical composition of conventional 56NiCrMoV7 while the other two produced steels were microalloyed by either titanium or titanium and nitrogen. The produced cast steel grades were reheated to 1150°C and hold for 2 hours, followed by forging process. The forging process was carried out in temperature range 950°C - 1100°C. Solution treatment of hot forged steels was conducted at 880°C, 850°C followed by air and oil quenching, respectively. Quenched steel samples of different steel grades were tempered at different temperatures in the range of 300°C to 650°C for 45 min. The hardness variations after tempering of the two modified steels comparing with the conventional 56NiCrMoV7 steel were studied. Microadditions of titanium or titanium and nitrogen were found to produce secondary hardening at 550°C to 575°C (45 min) with a hardness peak higher than that attained in the conventional 56NiCrMoV7 steel. The effect of titanium and nitrogen additions on phases formation was investigated by Thermo-Calc. SEM was used to confirm Thermo-Calc analysis. Interpretation between hardness and formed phases has been illustrated.展开更多
文摘This paper reports a study of the addition effects of either titanium or titanium and nitrogen of steel grade DIN 56NiCrMoV7 on mechanical properties. Three steel grades were produced in 30 kg-induction furnace, one conforms the chemical composition of conventional 56NiCrMoV7 while the other two produced steels were microalloyed by either titanium or titanium and nitrogen. The produced cast steel grades were reheated to 1150°C and hold for 2 hours, followed by forging process. The forging process was carried out in temperature range 950°C - 1100°C. Solution treatment of hot forged steels was conducted at 880°C, 850°C followed by air and oil quenching, respectively. Quenched steel samples of different steel grades were tempered at different temperatures in the range of 300°C to 650°C for 45 min. The hardness variations after tempering of the two modified steels comparing with the conventional 56NiCrMoV7 steel were studied. Microadditions of titanium or titanium and nitrogen were found to produce secondary hardening at 550°C to 575°C (45 min) with a hardness peak higher than that attained in the conventional 56NiCrMoV7 steel. The effect of titanium and nitrogen additions on phases formation was investigated by Thermo-Calc. SEM was used to confirm Thermo-Calc analysis. Interpretation between hardness and formed phases has been illustrated.
