A Multiphase Wellbore Flow Model for Sour Gas “Kicks”

This study presents a new multiphase flow model with transient heat transfer and pressure coupling to simulate HTHP(high temperature and high pressure)sour gas“kicks”phenomena.The model is intended to support the estimation of wellbore temperature and pressure when sour gas kicks occur during drilling operation.The model considers sour gas solubility,phase transition and effects of temperature and pressure on the physical parameters of drilling fluid.Experimental data for a large-diameter pipe flow are used to validate the model.The results indicate that with fluid circulation,the annulus temperature with H2S kicks is the highest,followed by CO_(2),and CH_(4) is the lowest.The phase transition point of H2S is closer to wellhead compared with CO_(2),resulting in a faster expansion rate,which is more imperceptible and dangerous.With fluid circulation,the drilling fluid density and plastic viscosity both first decrease and then increase with the increase in the well depth.The bottom hole pressure when H2S kicks is greater than that for CO_(2) with the same amount of sour gas,and the pressure difference gradually increases with the increase of H2S/CO_(2) content.In addition,a parametric sensitivity analysis has been conducted to evaluate qualitatively and rank the influential factors affecting the bottom hole temperature and pressure.