A non-fullerene acceptor enables efficient P3HT-based organic solar cells with small voltage loss and thickness insensitivity

Poly(3-hexylthiophene)(P3HT) is a low-cost polymer donor for organic solar cells (OSCs). However, the P3HT-based OSCs usually give low power conversion efficiencies (PCEs) due to the wide bandgap and the high-lying energy levels of P3HT. To solve this problem, in this work, we design and synthesize a new A-D-A type non-fullerene acceptor, DFPCBR, which owns an electron-donating (D) core constructed by linking a 2,5-difluorobenzene ring with two cyclopentadithiophene moieties, and two electron-accepting (A) end-groups of benzo[c][1,2,5]thiadiazole connected with 3-ethyl-2-thioxothiazolidin-4-one. Because of the strong electron-donating ability and large conjugation effect of D core, DFPCBR shows appropriate energy levels and a narrow bandgap matching well with those of P3HT. Therefore, with P3HT as the donor and DFPCBR as the acceptor, the OSCs possess broad absorption range from 350 nm to 780 nm and the reduced energy loss (Eloss) of 0.79 eV (compared with ~1.40 eV for the P3HT:PC61BM device), providing a good PCE of 5.34% with a high open-circuit voltage (VOC) of 0.80 V. Besides, we observe that the photovoltaic performances of these devices are insensitive to the thickness of the active layers:even if the active layer is as thick as 320 nm,~80%of the best PCE is maintained, which is rarely reported for fullerene-free P3HT-based OSCs, suggesting that DFPCBR has the potential application in commercial OSCs in the future.

Design of Non-fused Ring Acceptors toward High-Performance,Stable,and Low-Cost Organic Photovoltaics

Toward future commercial applications of organic solar cells(OSCs),organic photovoltaic materials that enable high efficiency,excellent stability,and low cost should be developed.Fused-ring electron acceptors(FREAs)have declared that OSCs are capable of showing efficiencies over 19%,whereas stability and cost are not solved yet.As the counterparts of FREAs,non-fused ring electron acceptors(NFREAs)are more flexible in molecular design.They have better stability because of the reduction of intramolecular tension via breaking fused backbone and have more advantages in cost with the reduction of synthetic complexity.However,the challenge for NFREAs is the relatively lower efficiencies(around 15%at current stage),which require better molecular designs for addressing the issues of conformational unicity and effective molecular packing.In this Account,we comprehensively summarize works about NFREAs carried out in our group from three main frameworks,including molecular design and efficiency optimization,material cost,and stability.First,in the part of molecular design and efficiency optimization,the existing rotatable single bond in NFREAs will bring the problem of conformational uncertainty,but it can be solved through proper molecular design,which also regulates the energy levels,light absorption range,and the packing mode of the molecule for obtaining higher performance.Thus,in this part,we discuss the evolution of NFREAs in three aspects,including molecular skeleton optimization,terminal modification,and side chain engineering.Many strategies are used in the design of a molecular skeleton,such as utilizing the quinoid effect,introducing functional groups with the electron push−pulling effect,and using multiple conformational lock.Furthermore,simplifying the skeleton is also the preferred development tendency.As for the terminal,the main modification strategy is adjusting the conjugation length and halogen atoms.What is more,by adjusting the side chain to induce appropriate steric hindrance,we can fix the orientation of molecules,thus regulating molecular packing modes.Second,regarding material cost,we compare the synthesis complexities between state-of-the-art FREAs and NFREAs.Because the synthesis processes of NFREAs reduce the complex cyclization reactions,the synthesis routes are greatly simplified,and the molecule can be obtained through three minimal steps.Third,regarding stability,we analyze the workable strategies used in NFREAs from the views of intrinsic material stability,photostability,and thermal stability.Finally,we conclude the challenges that should be conquered for NFREAs and propose perspectives that could be performed for NFREAs,with the hope of pushing the development of OSCs toward high performance,stability,and low cost.

Efficient and 1,8-diiodooctane-free ternary organic solar cells fabricated via nanoscale morphology tuning using small-molecule dye additive

The ternary strategy for incorporating multiple photon-sensitive components into a single junction has emerged as an effective method for optimizing the nanoscale morphology and improving the device performance of organic solar cells （OSCs）.In this study,efficient and stable ternary OSCs were achieved by introducing the small-molecule dye （5E,5＆#39;E）-5,5＆#39;-（4＆#39;,4″-（1,2-diphenylethene-1,2-diyl）bis（biphenyl-4＆#39;,4-diyl））bis（methan-1-yl-1-ylidene）bis（3-ethyl-2-thioxothia zolidin-4-one） （BTPERn） into poly[4,8-bis（5-（2-ethylhexyl）thiophen-2-yl）benzo[1,2-b：4,5-b＆#39;]dithiopheneco-3-fluorothieno[3,4-b]thiophene-2-carboxylate] （PTB7-Th）：[6,6]-phenyl C71 butyric acid methyl ester （PC71BM） blend films processed using a 1,8-diiodooctane （DIO）-free solvent.The incorporation of BTPE-Rn enhanced the short-circuit current density and fill factor of the ternary OSCs compared with those of binary OSCs.An investigation of the optical,electronic,and morphological properties of the ternary blends indicated that the third component of BTPE-Rn not only promoted the photon utilization of blends through the energy-transfer process but also improved the electron mobility of the blends owing to the fullerene-rich nanophase optimization.More importantly,this ternary strategy of utilizing a small-molecule dye to replace the photounstable DIO additive enhanced the operational stability of the OSCs.