Individualized Design of the Ventilator Mask based on the Residual Concentration of CO2

OSAHS(Obstructive Sleep Apnea Hypopnea Syndrome)is a respiratory disease mainly characterized by limited and repeated pauses of breathing in sleep.Currently,the optimal treatment is to apply CPAP(Continuous Positive Airway Pressure)ventilation on the upper airway of the patient through a household respiratory machine.However,if the ventilator mask is designed improperly,it might cause the residue and repeated inhalation of CO2,which will exert an adverse impact on the therapeutic effect.Present research numerically analyzed the CO2 transportation inside a commercial ventilator mask(Mirage SoftGel,ResMed,Australia)based on the reconstructed 3D numerical model of a volunteer's face and performed the improved design of the ventilator mask in terms of the CO2 residual concentration below the nostrils.The fluid dynamic analyses showed that at the end time of expiratory,the CO2 residual concentration below the nostrils is close to 4%.To improve the therapeutic effect,we changed the position of the exhaust holes and found that by moving the exhaust holes to the bottom of the ventilator mask,the CO2 residual concentration below the nostrils would be reduced to no more than 1%.This study established a near physiological computational model and provided a new method for the individualized design of the commercial ventilator mask.

Energy-efficient Bio-inspired Gait Planning and Control for Biped Robot Based on Human Locomotion Analysis

In this paper an experiment of human locomotion was carried out using a motion capture system to extract the human gait features. The modifiable key gait parameters affecting the dominant performance of biped robot walking were obtained from the extracted human gait features. Based on the modifiable key gait parameters and the Allowable Zero Moment Point （ZMP） Variation Region （AZR）, we proposed an effective Bio-inspired Gait Planning （BGP） and control scheme for biped robot to- wards a given travel distance D. First, we construct an on-line Bio-inspired Gait Synthesis algorithm （BGSN） to generate a complete walking gait motion using the modifiable key gait parameters. Second, a Bio-inspired Gait Parameters Optimization algorithm （BGPO） is established to minimize the energy consumption of all actuators and guarantee biped robot walking with certain walking stability margin. Third, the necessary controllers for biped robot were introduced in briefly. Simulation and experiment results demonstrated the effectiveness of the proposed method, and the gait control system was implemented on DRC-XT humanoid robot.

An Experimental Analysis of Overcoming Obstacle in Human Walking

In this paper, an experimental analysis of overcoming obstacle in human walking is carried out by means of a motion capture system. In the experiment, the lower body of an adult human is divided into seven segments, and three markers are pasted to each segment with the aim to obtain moving trajectory and to calculate joint variation during walking. Moreover, kinematic data in terms of displacement, velocity and acceleration are acquired as well. In addition, ground reaction forces are measured using force sensors. Based on the experimental results, features of overcoming obstacle in human walking are ana- lyzed. Experimental results show that the reason which leads to smooth walking can be identified as that the human has slight movement in the vertical direction during walking; the reason that human locomotion uses gravity effectively can be identified as that feet rotate around the toe joints during toe-off phase aiming at using gravitational potential energy to provide propulsion for swing phase. Furthermore, both normal walking gait and obstacle overcoming gait are characterized in a form that can provide necessary knowledge and useful databases for the implementation of motion planning and gait planning towards overcoming obstacle for humanoid robots.

A Unified Dynamic Control Method for a Redundant Dual Arm Robot

Compared to single arm robot system, dual arm robot has the ability of performing human-like dexterity and cooperation. Dual arm cooperative operation has attracted more and more attention in industrial applications, such as in assembly of complex parts, manufacturing tasks and handling objects. A unified dynamic control method, which is divided into three modes, namely, independent mode, dependent mode, and half dependent mode, is proposed for a redundant dual arm robot with focus on the movement and force of the desired task being operated. Attention is devoted to develop a unified formulation of the above three modes. In addition, a closed form of inverse kinematic solution instead of numerical integration approach is proposed with the aim to guarantee position accuracy. Different from traditional dynamic controllers, where the independent redundancy resolution is obtained based on particular velocity or acceleration levels, here the two dynamic controllers are improved by combining a closed form of inverse kinematic solution with velocity and acceleration levels. Furthermore, the theoretical results of the proposed control method are validated by simulations and experiments.

The Impulse Excitation Joint Servo Drive Design and Adaptive Backstepping Control of Humanoid Robots

This study aims to explore the humanoid robot joint servo drive integration design and adaptive backstepping control. To make the humanoid robot have explosive power as the human does, simply increasing the power output of the motor of a lightweight design cannot meet the demand of moving heavy objects and so on. Moreover, the backstepping control algorithm is designed to implement the dual-arm cooperative control. The joint servo drive is redesigned in the present study, which can drive the motor at a limitation state when needed output high-voltage pulse can stimulate the motor so that the motor can produce an instantaneous large torque. A miniature design scheme is presented in this study for the servo drive, explaining the design method of each part module. The ex- perimental data illustrate that the servo drive can produce an output torque greater than the rate of the high-voltage pulse that stimulates the motor. Knowledge of the control of humanoid robot moving a heavy object has important practical significance. The present study provides a complete actual problem and exhibits a real practical use case which can be used to speed up the explosive humanoid robot arms.

Adaptive Fuzzy Sliding Mode Controller with Nonlinear Observer for Redundant Manipulators Handling Varying External Force

An Adaptive Fuzzy Sliding Mode Controller with Nonlinear Observer （AFSMCO） for the redundant robotic manipulator is proposed in this paper. This approach could achieve a precise trajectory tracking for a robot manipulator in the presence of uncertainties and disturbances. Primarily, a suitable observer using the recursive algorithm is presented for an accurate estima- tion of external disturbances caused by the varying external force. Secondly, the adaptive fuzzy logic is designed to approximate the parameters of the sliding mode controller （AFSMC） to avoid chattering in real time. Moreover, it is shown using the Lyapunov theory that the tracking error asymptotically converges to zero. Finally, the effectiveness of the proposed control approach and theoretical discussion are demonstrated by simulation results on a 7-1ink robot and tested on a 7-DOF manipulator platform.