With the number of decommissioned electric vehicles increasing annually,a large amount of discarded power battery cathode material is in urgent need of treatment.However,common leaching methods for recovering metal sa...With the number of decommissioned electric vehicles increasing annually,a large amount of discarded power battery cathode material is in urgent need of treatment.However,common leaching methods for recovering metal salts are economically inefficient and polluting.Meanwhile,the recycled material obtained by lithium remediation alone has limited performance in cycling stability.Herein,a short method of solid-phase reduction is developed to recover spent LiFePO4 by simultaneously introducing Mg2+ions for hetero-atom doping.Issues of particle agglomeration,carbon layer breakage,lithium loss,and Fe3+defects in spent LiFePO4 are also addressed.Results show that Mg2+addition during regeneration can remarkably enhance the crystal structure stability and improve the Li+diffusion coefficient.The regenerated LiFePO4 exhibits significantly improved electrochemical performance with a specific discharge capacity of 143.2 mAh·g^(−1)at 0.2 C,and its capacity retention is extremely increased from 37.9%to 98.5%over 200 cycles at 1 C.Especially,its discharge capacity can reach 95.5 mAh·g^(−1)at 10 C,which is higher than that of spent LiFePO4(55.9 mAh·g^(−1)).All these results show that the proposed regeneration strategy of simultaneous carbon coating and Mg2+doping is suitable for the efficient treatment of spent LiFePO4.展开更多
The metallurgical properties of the CaO–SiO_(2)–Al_(2)O_(3)–4.6wt%Mg O–Fe_(2)O_(3)slag system,formed by the co-treatment process of spent automotive catalyst(SAC)and copper-bearing electroplating sludge(CBES),were...The metallurgical properties of the CaO–SiO_(2)–Al_(2)O_(3)–4.6wt%Mg O–Fe_(2)O_(3)slag system,formed by the co-treatment process of spent automotive catalyst(SAC)and copper-bearing electroplating sludge(CBES),were studied systematically in this paper.The slag structure,melting temperature,and viscous characteristics were investigated by Fourier transform infrared(FTIR)spectroscopy,Raman spectroscopy,Fact Sage calculation,and viscosity measurements.Experimental results show that the increase of Fe_(2)O_(3)content(3.8wt%–16.6wt%),the mass ratio of CaO/SiO_(2)(m(CaO)/m(SiO_(2)),0.5–1.3),and the mass ratio of SiO_(2)/Al_(2)O_(3)(m(SiO_(2))/m(Al_(2)O_(3)),1.0–5.0)can promote the depolymerization of silicate network,and the presence of a large amount of Fe_(2)O_(3)in form of tetrahedral and octahedral units ensures the charge compensation of Al^(3+)ions and makes Al_(2)O_(3)only behave as an acid oxide.Thermodynamic calculation and viscosity measurements show that with the increase of Fe_(2)O_(3)content,m(Ca O)/m(SiO_(2)),and m(SiO_(2))/m(Al_(2)O_(3)),the depolymerization of silicate network structure and low-melting-point phase transformation first occur within the slag,leading to the decrease in melting point and viscosity of the slag,while further increase causes the formation of high-melting-point phase and a resultant re-increase in viscosity and melting point.Based on experimental analysis,the preferred slag composition with low polymerization degree,viscosity,and melting point is as follows:Fe_(2)O_(3)content of 10.2wt%–13.4wt%,m(CaO)/m(SiO_(2))of 0.7–0.9 and m(SiO_(2))/m(Al_(2)O_(3))of 3.0–4.0.This work provides a theoretical support for slag design in co-smelting process of SAC and CBES.展开更多
基金supported by the Science and Technology Innovation Program of Hunan Province(No.2020SK2007)the Natural Science Foundation of Hunan Province(No.2019JJ50814)+2 种基金the Fundamental Research Funds for the Central Universities of Central South University(No.1053320211765)the Science and Technology Planning Project of Guangdong Province of China(No.2017B030314046)Guangdong Academy of Sciences for Innovation Capacity Building(No.2016GDASRC0201).
文摘With the number of decommissioned electric vehicles increasing annually,a large amount of discarded power battery cathode material is in urgent need of treatment.However,common leaching methods for recovering metal salts are economically inefficient and polluting.Meanwhile,the recycled material obtained by lithium remediation alone has limited performance in cycling stability.Herein,a short method of solid-phase reduction is developed to recover spent LiFePO4 by simultaneously introducing Mg2+ions for hetero-atom doping.Issues of particle agglomeration,carbon layer breakage,lithium loss,and Fe3+defects in spent LiFePO4 are also addressed.Results show that Mg2+addition during regeneration can remarkably enhance the crystal structure stability and improve the Li+diffusion coefficient.The regenerated LiFePO4 exhibits significantly improved electrochemical performance with a specific discharge capacity of 143.2 mAh·g^(−1)at 0.2 C,and its capacity retention is extremely increased from 37.9%to 98.5%over 200 cycles at 1 C.Especially,its discharge capacity can reach 95.5 mAh·g^(−1)at 10 C,which is higher than that of spent LiFePO4(55.9 mAh·g^(−1)).All these results show that the proposed regeneration strategy of simultaneous carbon coating and Mg2+doping is suitable for the efficient treatment of spent LiFePO4.
基金financially supported by the Guangzhou Basic and Applied Basic Research Project,China(No.202102020623)the Guangdong Academy of Sciences’Project of Science and Technology Development,China(No.2020 GDASYL-20200103101)+1 种基金the National Key Research and Development Program of China(No.2020YFC1908902)the Natural Science Foundation of Guangdong Province Project,China(No.2020A1515010729)。
文摘The metallurgical properties of the CaO–SiO_(2)–Al_(2)O_(3)–4.6wt%Mg O–Fe_(2)O_(3)slag system,formed by the co-treatment process of spent automotive catalyst(SAC)and copper-bearing electroplating sludge(CBES),were studied systematically in this paper.The slag structure,melting temperature,and viscous characteristics were investigated by Fourier transform infrared(FTIR)spectroscopy,Raman spectroscopy,Fact Sage calculation,and viscosity measurements.Experimental results show that the increase of Fe_(2)O_(3)content(3.8wt%–16.6wt%),the mass ratio of CaO/SiO_(2)(m(CaO)/m(SiO_(2)),0.5–1.3),and the mass ratio of SiO_(2)/Al_(2)O_(3)(m(SiO_(2))/m(Al_(2)O_(3)),1.0–5.0)can promote the depolymerization of silicate network,and the presence of a large amount of Fe_(2)O_(3)in form of tetrahedral and octahedral units ensures the charge compensation of Al^(3+)ions and makes Al_(2)O_(3)only behave as an acid oxide.Thermodynamic calculation and viscosity measurements show that with the increase of Fe_(2)O_(3)content,m(Ca O)/m(SiO_(2)),and m(SiO_(2))/m(Al_(2)O_(3)),the depolymerization of silicate network structure and low-melting-point phase transformation first occur within the slag,leading to the decrease in melting point and viscosity of the slag,while further increase causes the formation of high-melting-point phase and a resultant re-increase in viscosity and melting point.Based on experimental analysis,the preferred slag composition with low polymerization degree,viscosity,and melting point is as follows:Fe_(2)O_(3)content of 10.2wt%–13.4wt%,m(CaO)/m(SiO_(2))of 0.7–0.9 and m(SiO_(2))/m(Al_(2)O_(3))of 3.0–4.0.This work provides a theoretical support for slag design in co-smelting process of SAC and CBES.