The effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete （SCGC） was investigated in this paper. The work focused on the concrete mixes with a fixed water-to...The effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete （SCGC） was investigated in this paper. The work focused on the concrete mixes with a fixed water-to-geopolymer solid （W/Gs） ratio of 0.33 by mass and a constant total binder content of 400 kg/m3. The mass fractions of silica fume that replaced fly ash in this research were 0wt%, 5wt%, 10wt%, and 15wt%. The workability-related fresh properties of SCGC were assessed through slump flow, V-funnel, and L-box test methods. Hardened concrete tests were limited to compressive, splitting tensile and flexural strengths, all of which were measured at the age of 1, 7, and 28 d after 48-h oven curing. The results indicate that the addition of silica fume as a partial replacement of fly ash results in the loss of workability; nevertheless, the mechanical properties of hardened SCGC are significantly improved by incorporating silica fume, especially up to 10wt%. Applying this percentage of silica fume results in 4.3% reduction in the slump flow; however, it increases the compressive strength by 6.9%, tensile strength by 12.8% and flexural strength by 11.5%.展开更多
基金Universiti Teknologi PETRONAS and the Ministry of Science,Technology,and Innovation,Malaysia (Research grant 06-02-02-SF0052) for providing the financial support and research facilities
文摘The effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete （SCGC） was investigated in this paper. The work focused on the concrete mixes with a fixed water-to-geopolymer solid （W/Gs） ratio of 0.33 by mass and a constant total binder content of 400 kg/m3. The mass fractions of silica fume that replaced fly ash in this research were 0wt%, 5wt%, 10wt%, and 15wt%. The workability-related fresh properties of SCGC were assessed through slump flow, V-funnel, and L-box test methods. Hardened concrete tests were limited to compressive, splitting tensile and flexural strengths, all of which were measured at the age of 1, 7, and 28 d after 48-h oven curing. The results indicate that the addition of silica fume as a partial replacement of fly ash results in the loss of workability; nevertheless, the mechanical properties of hardened SCGC are significantly improved by incorporating silica fume, especially up to 10wt%. Applying this percentage of silica fume results in 4.3% reduction in the slump flow; however, it increases the compressive strength by 6.9%, tensile strength by 12.8% and flexural strength by 11.5%.
