The hybrid functionally graded materials(FGM) of hydroxyapatite(HA), stainless steel 316L(SS316L) and carbon nanotubes(CNT) were synthesized for biomedical implants. Three different types of FGM were produced by the c...The hybrid functionally graded materials(FGM) of hydroxyapatite(HA), stainless steel 316L(SS316L) and carbon nanotubes(CNT) were synthesized for biomedical implants. Three different types of FGM were produced by the combination of SS316 L and CNT to reinforce HA in discrete layers of FGM. In the first type of FGM, concentration of SS316 L was varied from 10% to 40%(mass fraction) with an increment of 10% to reinforce micro HA. In the second type of FGM, 0.5%(mass fraction) functionalized CNT was added by maintaining the rest of composition as that of the first type of FGM. In the third type of FGM, mixture of micro and nano HA(mass ratio1:1) was used, keeping rest of composition similar to the second type of FGM. All types of FGM were subjected to uniaxial compaction and sintered by pressureless sintering technique at similar compaction and sintering parameters. The results show that the densification is enhanced with the addition of CNT and nanocrystalline HA in the FGM. Hardness and fracture toughness increase in both FGM reinforced with CNT, but the increase of the hardness and fracture toughness are more pronounced in FGM with micro and nanocrystalline HA.展开更多
The lead-free SrZrO3-modified Bi0.5Na0.5TiO3(BNT-SZ100 x, with x=0-0.15) ceramics were fabricated by a conventional solid-state reaction method. The effects of SZ addition on BNT ceramics were investigated through X-r...The lead-free SrZrO3-modified Bi0.5Na0.5TiO3(BNT-SZ100 x, with x=0-0.15) ceramics were fabricated by a conventional solid-state reaction method. The effects of SZ addition on BNT ceramics were investigated through X-ray diffraction(XRD), scanning electron microscopy(SEM), ferroelectric and electric field-induced strain characterizations. XRD analysis revealed a pure perovskite phase without any traces of secondary phases. Ferroelectric and bipolar field induced-strain curves indicated a disruption of ferroelectric order upon SZ addition into BNT ceramics. A maximum value of remnant polarization(32 μC/cm2) and piezoelectric constant(102 pC/N) was observed at 5%(mole fraction) of SZ. Maximum value of the electric field-induced strain(Smax=0.24%) corresponding to normalized strain(Smax/Emax= d*33= 340 pm/V) was obtained at BNT-SZ9.展开更多
基金GIK Institute for financial assistance and providing research facilitiessupported by the Basic Research program through the National Research Foundation of Korea (NRF) funded by Ministry, Science and Technology (MEST) (2011-0030058)
文摘The hybrid functionally graded materials(FGM) of hydroxyapatite(HA), stainless steel 316L(SS316L) and carbon nanotubes(CNT) were synthesized for biomedical implants. Three different types of FGM were produced by the combination of SS316 L and CNT to reinforce HA in discrete layers of FGM. In the first type of FGM, concentration of SS316 L was varied from 10% to 40%(mass fraction) with an increment of 10% to reinforce micro HA. In the second type of FGM, 0.5%(mass fraction) functionalized CNT was added by maintaining the rest of composition as that of the first type of FGM. In the third type of FGM, mixture of micro and nano HA(mass ratio1:1) was used, keeping rest of composition similar to the second type of FGM. All types of FGM were subjected to uniaxial compaction and sintered by pressureless sintering technique at similar compaction and sintering parameters. The results show that the densification is enhanced with the addition of CNT and nanocrystalline HA in the FGM. Hardness and fracture toughness increase in both FGM reinforced with CNT, but the increase of the hardness and fracture toughness are more pronounced in FGM with micro and nanocrystalline HA.
基金supported by the Basic Research program through the National Research Foundation of Korea (NRF) funded by Ministry, Science and Technology (MEST) (2011-0030058)
文摘The lead-free SrZrO3-modified Bi0.5Na0.5TiO3(BNT-SZ100 x, with x=0-0.15) ceramics were fabricated by a conventional solid-state reaction method. The effects of SZ addition on BNT ceramics were investigated through X-ray diffraction(XRD), scanning electron microscopy(SEM), ferroelectric and electric field-induced strain characterizations. XRD analysis revealed a pure perovskite phase without any traces of secondary phases. Ferroelectric and bipolar field induced-strain curves indicated a disruption of ferroelectric order upon SZ addition into BNT ceramics. A maximum value of remnant polarization(32 μC/cm2) and piezoelectric constant(102 pC/N) was observed at 5%(mole fraction) of SZ. Maximum value of the electric field-induced strain(Smax=0.24%) corresponding to normalized strain(Smax/Emax= d*33= 340 pm/V) was obtained at BNT-SZ9.
