期刊文献+
共找到1篇文章
< 1 >
每页显示 20 50 100
Effect of multiaxial deformation on structure, mechanical properties, and corrosion resistance of a Mg-Ca alloy 被引量:1
1
作者 N.Yu.Yurchenko N.D.Stepanov +7 位作者 G.A.Salishchev V.N.Serebryany n.s.martynenko E.A.Lukyanova L.L.Rokhlin N.Birbilis S.V.Dobatkin Y.Z.Estrin 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2022年第1期284-298,共15页
This article provides a report on the effect of multiaxial deformation(MAD) on the structure, texture, mechanical characteristics, and corrosion resistance of the Mg-0.8(wt.)% Ca alloy. MAD was carried out on the allo... This article provides a report on the effect of multiaxial deformation(MAD) on the structure, texture, mechanical characteristics, and corrosion resistance of the Mg-0.8(wt.)% Ca alloy. MAD was carried out on the alloy in the as-cast and the annealed states in multiple passes, with a stepwise decrease in the deformation temperature from 450 to 250 ℃ in 50 ℃ steps. The cumulative true strain at the end of the process was 22.5. In the case of the as-cast alloy, this resulted in a refined microstructure characterized by an average grain size of 2.7 μm and a fraction of high-angle boundaries(HABs) of 57.6%. The corresponding values for the annealed alloy were 2.1 μm and 68.2%. The predominant mechanism of structure formation was associated with discontinuous and continuous dynamic recrystallization acting in concert. MAD was also shown to lead to the formation of a rather sharp prismatic texture in the as-cast alloy, whilst in the case of the annealed one the texture was weakened. A displacement of the basal poles {00.4} from the periphery to the center of a pole figure was observed. These changes in the microstructure and texture gave rise to a significant improvement of the mechanical characteristics of the alloy. This included an increase of the ultimate tensile strength reaching 308 MPa for annealed material and 264 MPa for the as-cast one in conjunction with a twofold increase in ductility. A further important result of the MAD processing was a reduction of the rate of electrochemical corrosion, as indicated by a significant decrease in the corrosion current density in both microstructural states of the alloy studied. 展开更多
关键词 Metals and alloys Multiaxial deformation MICROSTRUCTURE RECRYSTALLIZATION Mechanical properties CORROSION
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部