期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
装有贝塞尔盒型能量分析仪的电离规和四极质谱计的研制
1
作者 n.takahashi K.TaKeuchi +3 位作者 J.Yuyama Y.Tuzi 郭长武 陆国柱 《真空》 CAS 北大核心 2003年第1期1-11,共11页
关键词 贝塞尔盒型能量分析仪 电离规 四极质谱计 真空测量仪 压力测量 真空规
下载PDF
Performance of Ionization Gauge and Quadrupole Mass Spectrometer with Bessel-Box Type Energy Analyzer:a Review of Progress
2
作者 n.takahashi K.Takeuchi +1 位作者 J.Yuyama Y Tuzi 《真空科学与技术》 CSCD 北大核心 2003年第1期33-39,共7页
A novel energy analyzer with a simple structured Bessel box has been successfully developed and incorporated into ionization gauges and quadrupole mass spectrometers (QMS) to improve their measurement of the total and... A novel energy analyzer with a simple structured Bessel box has been successfully developed and incorporated into ionization gauges and quadrupole mass spectrometers (QMS) to improve their measurement of the total and partial pressures,respectively.We found that the energy analyzer may not only effectively separate the gas phase ions and electron stimulated desorption (ESD) ions produced in the ionizer,but also screen the ion collector from irradiation of the soft X rays and VUVphotons generated in the ionizer.The screening effects considerably better the trace impurity detection limit of the QMS down to a few tens ppb in the pressure range of 10 -3 Pa.The modified ionization gauge is capable of measuring pressure ranging from 10 -11 to 10 -6 Pa in the pulse counting mode and its upper limit may extends to 10 -3 Pa in DC ion current mode with typical sensitivities factor of(6.7±0.2)×10 -3 Pa -1 for N 2 and (2.3±0.2)×10 -3 Pa -1 for H 2,respectively.No ESD ions was observed in the simple looking spectrum obtained with the modified QMS.We also found that the energy spectra of fragment ions depend strongly on species of parent ions. 展开更多
关键词 BESSEL-BOX型能量分析器 离子规 四级质谱计 性能
下载PDF
泡沫材料的换代产品——PET纤维
3
作者 n.takahashi 刘传斌 《国外纺织技术(纺织针织服装化纤染整)》 2001年第9期11-12,18,共3页
关键词 PET纤维 新型弹性聚酯纤维 结构 特性
下载PDF
铸造Pr-Fe-B-M合金的矫顽力和显微结构(M=Cu,Ga,Ag,Al,In,Pb)
4
作者 n.takahashi H.Nakamura 喻承寅 《电工合金文集》 1992年第2期43-46,共4页
本文叙述了铸造Pr_(17)-Fe_(77.5)-B_4-M_(1.5)(M=Cu,Ga,Ag,Al,In和Pb)合金的矫顽力与显微结构之间的关系。在合金中加入Cu,Ga,Ag等元素,可降低作为共晶组织的富Pr相的熔点,并增加了退火状态的铸造合金的矫顽力。特别是含Cu,Ga和Ag等元... 本文叙述了铸造Pr_(17)-Fe_(77.5)-B_4-M_(1.5)(M=Cu,Ga,Ag,Al,In和Pb)合金的矫顽力与显微结构之间的关系。在合金中加入Cu,Ga,Ag等元素,可降低作为共晶组织的富Pr相的熔点,并增加了退火状态的铸造合金的矫顽力。特别是含Cu,Ga和Ag等元素的铸造合金,在723K温度下退火之后,更进一步增加了合金的矫顽力,其值最高可达732KA/m。 展开更多
关键词 铸造合金 矫顽力 显微结构
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部