This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate mat...This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate matter samples(PM_(2.5))using ion-imprinted polymers as adsorbent packed in minicolumn.A bulk polymerization method was chosen to synthesize the polymer based on a ternary complex of lead ions with 4-2-pyridilazo resorcinol and 4-vinyl pyridine with methacrylic acid as a functional monomer.The optimum pH for sorption was 6,and other variables for the FIA system were optimized,including breakthrough volume,eluent concentration,and eluent volume.The optimum conditions were reached with a breakthrough volume of 4.45 mL,calculated as a dynamic retention capacity of 5.20 mg/g of Pb(II)40 mg/L,with a 1.5 mL/min flow rate.The eluent used for the FIA system was 0.5 mL HNO_(3)of 3 mol/L.Linearity,precision,and limits of detection of the FIA system were determined before being applied to preconcentration and analysis of lead ions in PM_(2.5)samples.The precision of the method was determined to be 3.09%by calculating the coefficients of the variant.Linearity of the method in the concentration range of 50-1000μg/L gave a coefficient correlation of 0.9925,showing a good response,and the limit of detection of the system was 5.11μg/L,better than that of the FAAS method.Performances of the FIA system were evaluated and showed good results with an enrichment factor of more than 20 times higher and a concentration efficiency of 11.65 min^(-1)with a consumptive index of 4.5 mL.Preconcentration and analysis of the PM_(2.5)samples in Bandung City showed the concentrations of Pb(II)were 26.67μg/L and 33.3μg/L with the accuracy of the method for each sample of104.75%and 107.86%.展开更多
基金Badan Riset dan Inovasi Nasional,Dissertation research grant。
文摘This work reported a simple and sensitive flow injection analysis(FIA)technique coupled with a Flame Atomic Absorption Spectrophotometer(FAAS)for online preconcentration of lead(Ⅱ)ions in the airborne particulate matter samples(PM_(2.5))using ion-imprinted polymers as adsorbent packed in minicolumn.A bulk polymerization method was chosen to synthesize the polymer based on a ternary complex of lead ions with 4-2-pyridilazo resorcinol and 4-vinyl pyridine with methacrylic acid as a functional monomer.The optimum pH for sorption was 6,and other variables for the FIA system were optimized,including breakthrough volume,eluent concentration,and eluent volume.The optimum conditions were reached with a breakthrough volume of 4.45 mL,calculated as a dynamic retention capacity of 5.20 mg/g of Pb(II)40 mg/L,with a 1.5 mL/min flow rate.The eluent used for the FIA system was 0.5 mL HNO_(3)of 3 mol/L.Linearity,precision,and limits of detection of the FIA system were determined before being applied to preconcentration and analysis of lead ions in PM_(2.5)samples.The precision of the method was determined to be 3.09%by calculating the coefficients of the variant.Linearity of the method in the concentration range of 50-1000μg/L gave a coefficient correlation of 0.9925,showing a good response,and the limit of detection of the system was 5.11μg/L,better than that of the FAAS method.Performances of the FIA system were evaluated and showed good results with an enrichment factor of more than 20 times higher and a concentration efficiency of 11.65 min^(-1)with a consumptive index of 4.5 mL.Preconcentration and analysis of the PM_(2.5)samples in Bandung City showed the concentrations of Pb(II)were 26.67μg/L and 33.3μg/L with the accuracy of the method for each sample of104.75%and 107.86%.
