Understanding the effects of cover crops and tillage on soil physical properties is important for determining soil productivity. This study was conducted at Lincoln University＇s Freeman Center, USA to evaluate the ef...Understanding the effects of cover crops and tillage on soil physical properties is important for determining soil productivity. This study was conducted at Lincoln University＇s Freeman Center, USA to evaluate the effects of tillage and cover crop management on soil hydraulic properties. The field site included three replicate blocks in a randomized complete block design with each plot measuring 21.3 m in length and 12.2 m in width. Treatment factors were tillage at two levels （moldboard plow tillage vs. no tillage） and cover crop at two levels （cereal rye （Secale cereal） cover crop vs. no cover crop）. Soil samples were collected in late spring/early summer from each treatment at 10-cm depth increments from the soil surface to a depth of 40 cm using cores （76.2-mm diameter and 76.2-mm length）. Soil bulk density was 13% lower with tillage compared with no-tillage. Volumetric water content was significantly higher at 0.0 and -0.4 kPa pressures with tillage compared with no tillage. Tillage increased the proportion of coarse mesopores by 32gc compared with no tillage, resulting in 87% higher saturated hydraulic conductivity （Ksat）. Cover crop increased the proportion of macropores by 24~ compared with no cover crop; this can potentially increase water infiltration and reduce runoff. As a result of higher macroporosity, Ksat was higher under cover crop compared with no cover crop. This study demonstrated that tillage can benefit soil hydraulic properties in the short term, but these effects may not persist over time. Cover crops may slightly improve soil hydraulic properties, but longer term studies are needed to evaluate the long-term effects.展开更多
基金funded by the USDA-National Institute of Food and Agriculture (NIFA) research (Cropping Systems Coordinated Agricultural Project: Climate Change Mitigation, and Adaptation in Cornbased Cropping Systems) grant (No. 2011-68002-30190)
文摘Understanding the effects of cover crops and tillage on soil physical properties is important for determining soil productivity. This study was conducted at Lincoln University＇s Freeman Center, USA to evaluate the effects of tillage and cover crop management on soil hydraulic properties. The field site included three replicate blocks in a randomized complete block design with each plot measuring 21.3 m in length and 12.2 m in width. Treatment factors were tillage at two levels （moldboard plow tillage vs. no tillage） and cover crop at two levels （cereal rye （Secale cereal） cover crop vs. no cover crop）. Soil samples were collected in late spring/early summer from each treatment at 10-cm depth increments from the soil surface to a depth of 40 cm using cores （76.2-mm diameter and 76.2-mm length）. Soil bulk density was 13% lower with tillage compared with no-tillage. Volumetric water content was significantly higher at 0.0 and -0.4 kPa pressures with tillage compared with no tillage. Tillage increased the proportion of coarse mesopores by 32gc compared with no tillage, resulting in 87% higher saturated hydraulic conductivity （Ksat）. Cover crop increased the proportion of macropores by 24~ compared with no cover crop; this can potentially increase water infiltration and reduce runoff. As a result of higher macroporosity, Ksat was higher under cover crop compared with no cover crop. This study demonstrated that tillage can benefit soil hydraulic properties in the short term, but these effects may not persist over time. Cover crops may slightly improve soil hydraulic properties, but longer term studies are needed to evaluate the long-term effects.
