Double-skin façade simulation with computational fluid dynamics:A review of simulation trends,validation methods and research gaps

Dynamic simulation of a double-skin façade(DSF)with computational fluid dynamics(CFD)can be challenging due to the lack of validated models and benchmarking datasets.Furthermore,there is a lack of consensus in the scientific community on what constitutes a successfully validated DSF model.The present review study identifies simulation trends and research gaps for DSFs simulated with CFD.Additionally,this article presents a series of CFD simulations in which key aspects of the DSF modelling are varied:2D or 3D modelling approaches,turbulence viscosity models(TVMs),radiation models,and wall function.These simulation results are compared to the empirical data(both temperature and velocity fields)of a benchmark test with laboratory-controlled boundary conditions.This analysis shows that using the k-εRNG model with enhanced wall treatment and surface-to-surface(S2S)radiation model yields the best results for the 2D case of natural convection flow.Moreover,it is shown that accounting for the velocity field in the validation process is essential to ensure the suitability of a model.Finally,the authors advocate for the use of selected dimensionless numbers to improve the comparability of the different DSF scientific studies.This would also help to identify relevant experimental datasets for validation and suitable CFD simulation settings for specific DSF cases.

Evaluating the different boundary conditions to simulate airflow and heat transfer in Double-Skin Facade

The CFD simulation accuracy mostly depends on the appropriate setting of boundary conditions and numerical simulation parameters.This study shows the influence of two types of boundary condition settings on the CFD simulation results of Double-Skin Facade(DSF)for a specific problem.These two boundary settings are the constant temperature on the DSF surfaces called Boundary A,and Boundary B is defined via solar radiation using the Discrete Ordinate radiation Model(DOM).The paper verified both the numerical simulations using the experimental data.Comparing the numerical results of two types of boundaries with experimental data shows that both cases underestimated the values lower than 5.2 K and 0.1 m/s for the temperature and velocity respectively at the regarded measured points.Boundary A gives more accurate temperature prediction results,while Boundary B shows velocity magnitude closer to the measurements in the middle height of the cavity;the average temperature and velocity differences between the two boundary types are 0.6 K and 0.003 m/s respectively which are negligible.Finally,the selection of boundary conditions depends on study purposes,however,when the DSF is equipped with blinds and if there is not enough data in hand but the exact value of solar irradiation,using the Boundary B approach is suggested;it can provide reasonable results associated with multi-type of thermal boundary conditions at the same time.Furthermore,if the goal is to investigate the flow pattern in the DSF,Boundary B is argued to perform better than the constant temperature boundary condition.