This work focuses on the sol-gel spin coating technique of TiO2 nanostructure synthesis and its characterization. Though various methods have been used to fabricate TiO2 nanostructure, much effort has not been exerted...This work focuses on the sol-gel spin coating technique of TiO2 nanostructure synthesis and its characterization. Though various methods have been used to fabricate TiO2 nanostructure, much effort has not been exerted to achieve better photoresponsive and narrowly dispersed TiO2 nanostructure using the sol-gel spin coating method. Therefore, it is imperative to realize the synthesis of TiO2 nanostructures, and investigate their properties. In this work, TiO2 is synthesized by sol-gel spin coating technique using titanium tetraisopropoxide, isopropanol, acetic acid and deionized water as starting materials and deposited on borosilicate glass substrates. The effects of annealing temperatures (300˚C, 400˚C and 500˚C) on the structural and optical properties of the films were investigated by different techniques: Scanning Electron Microscopy (SEM), optical microscopy and UV-visible spectrophotometry. The optical characterization showed the direct band gap at 3.7 eV, 3.6 eV and 3.4 eV for 300˚C, 400˚C and 500˚C, respectively, and the optical transmittance and reflectance spectra showed a greater performance at 500˚C. The grain sizes obtained from SEM annealed at 300˚C, 400˚C and 500˚C are found to be about 6.0 nm, 5.0 nm and 4.0 nm respectively. The grain size of TiO2 nanostructure films decreased with increasing annealing temperatures. The results clearly indicated that the sol-gel spin coating synthesis of TiO2 nanostructure and post-thermal treatment at 500˚C cooled naturally at room temperature result in better photoresponsive and narrowly dispersed TiO2 nanostructure films with higher photoresponsive and good optical properties.展开更多
This paper reports the synthesis and characterization of ZnO thin films prepared by sol-gel spin coating technique. The sol-gel was prepared from zinc acetate dehydrate as a precursor, 2-me- thoxyethanol as a solvent ...This paper reports the synthesis and characterization of ZnO thin films prepared by sol-gel spin coating technique. The sol-gel was prepared from zinc acetate dehydrate as a precursor, 2-me- thoxyethanol as a solvent and di-ethanolamine as a stabilizer, and then deposited on glass substrate using spin coater at the coating speed of 1000 rpm, 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm and 6000 rpm. After pre-heated at 150℃, the samples were post-heated at 250oC and also annealed at 400℃. X-ray diffraction (XRD) of the films showed polycrystalline hexagonal structure, with (002) orientation as most intense peak having a grain size of 28.1 nm. The absorbance of the film decreases with increasing wavelength and the transmittance was generally high between visible regions from 280 nm - 1200 nm. The ZnO films deposited at a spinning speed of 2000 rpm had highest transmittance of 88% in the visible region from 280 nm - 1200 nm. The energy band gap was found to be in the range of 3.23 - 3.40 eV. The thicknesses of the films decreased with increase in coating speed. Based on these results, ZnO thin films obtained could have useful application in transparent conducting oxide electrode in solar cells.展开更多
文摘This work focuses on the sol-gel spin coating technique of TiO2 nanostructure synthesis and its characterization. Though various methods have been used to fabricate TiO2 nanostructure, much effort has not been exerted to achieve better photoresponsive and narrowly dispersed TiO2 nanostructure using the sol-gel spin coating method. Therefore, it is imperative to realize the synthesis of TiO2 nanostructures, and investigate their properties. In this work, TiO2 is synthesized by sol-gel spin coating technique using titanium tetraisopropoxide, isopropanol, acetic acid and deionized water as starting materials and deposited on borosilicate glass substrates. The effects of annealing temperatures (300˚C, 400˚C and 500˚C) on the structural and optical properties of the films were investigated by different techniques: Scanning Electron Microscopy (SEM), optical microscopy and UV-visible spectrophotometry. The optical characterization showed the direct band gap at 3.7 eV, 3.6 eV and 3.4 eV for 300˚C, 400˚C and 500˚C, respectively, and the optical transmittance and reflectance spectra showed a greater performance at 500˚C. The grain sizes obtained from SEM annealed at 300˚C, 400˚C and 500˚C are found to be about 6.0 nm, 5.0 nm and 4.0 nm respectively. The grain size of TiO2 nanostructure films decreased with increasing annealing temperatures. The results clearly indicated that the sol-gel spin coating synthesis of TiO2 nanostructure and post-thermal treatment at 500˚C cooled naturally at room temperature result in better photoresponsive and narrowly dispersed TiO2 nanostructure films with higher photoresponsive and good optical properties.
文摘This paper reports the synthesis and characterization of ZnO thin films prepared by sol-gel spin coating technique. The sol-gel was prepared from zinc acetate dehydrate as a precursor, 2-me- thoxyethanol as a solvent and di-ethanolamine as a stabilizer, and then deposited on glass substrate using spin coater at the coating speed of 1000 rpm, 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm and 6000 rpm. After pre-heated at 150℃, the samples were post-heated at 250oC and also annealed at 400℃. X-ray diffraction (XRD) of the films showed polycrystalline hexagonal structure, with (002) orientation as most intense peak having a grain size of 28.1 nm. The absorbance of the film decreases with increasing wavelength and the transmittance was generally high between visible regions from 280 nm - 1200 nm. The ZnO films deposited at a spinning speed of 2000 rpm had highest transmittance of 88% in the visible region from 280 nm - 1200 nm. The energy band gap was found to be in the range of 3.23 - 3.40 eV. The thicknesses of the films decreased with increase in coating speed. Based on these results, ZnO thin films obtained could have useful application in transparent conducting oxide electrode in solar cells.
