The results obtained in this work evince that the metallic mineral deposits located in the northern region of the Chilean-Pampean flat slab(in northern Chile and north-western Argentina),at approximately 27°30’S...The results obtained in this work evince that the metallic mineral deposits located in the northern region of the Chilean-Pampean flat slab(in northern Chile and north-western Argentina),at approximately 27°30’S,would be related to the subduction of the Copiapo aseismic ridge.The analysis of the gravity anomalies and vertical gravity gradient allows inferring a deflection and truncation of the main trend of the Andean structures at the extrapolated zone of the Copiapo ridge beneath South America.Thus,the general NNE-trend of the Andean structures are rotated locally to an ENE-strike within the area of the Ojos del Salado-San Buena Ventura lineament.We explain that this anomalous behavior of the gravity derived anomalies is related to the deformational effects imprinted by the ridge subduction.Regions with a low subduction angle(<30° to horizontal)are related to large mineralization due to fluids released by dehydration of the subducting crust.In addition,a higher degree of mantle melting could be produced by a thicker oceanic crust.Therefore,we interpret that the processes associated to the subduction of the Copiapo aseismic ridge(emplaced on a thickened oceanic crust due to a local compensation of the seamounts)are the cause of formation and emplacement of big metallic mineral deposits in this region of Chile and Argentina.展开更多
The analysis of space-time surface deformation during earthquakes reveals the variable state of stress that occurs at deep crustal levels, and this information can be used to better understand the seismic cycle. Under...The analysis of space-time surface deformation during earthquakes reveals the variable state of stress that occurs at deep crustal levels, and this information can be used to better understand the seismic cycle. Understanding the possible mechanisms that produce earthquake precursors is a key issue for earthquake prediction. In the last years, modern geodesy can map the degree of seismic coupling during the interseismic period, as well as the coseismic and postseismic slip for great earthquakes along subduction zones. Earthquakes usually occur due to mass transfer and consequent gravity variations, where these changes have been monitored for intraplate earthquakes by means of terrestrial gravity measurements. When stresses and correspondent rupture areas are large, affecting hundreds of thousands of square kilometres（as occurs in some segments along plate interface zones）, satellite gravimetry data become relevant. This is due to the higher spatial resolution of this type of data when compared to terrestrial data, and also due to their homogeneous precision and availability across the whole Earth.Satellite gravity missions as GOCE can map the Earth gravity field with unprecedented precision and resolution. We mapped geoid changes from two GOCE satellite models obtained by the direct approach,which combines data from other gravity missions as GRACE and LAGEOS regarding their best characteristics. The results show that the geoid height diminished from a year to five months before the main seismic event in the region where maximum slip occurred after the Pisagua Mw = 8.2 great megathrust earthquake. This diminution is interpreted as accelerated inland-directed interseismic mass transfer before the earthquake, coinciding with the intermediate degree of seismic coupling reported in the region. We highlight the advantage of satellite data for modelling surficial deformation related to preseismic displacements. This deformation, combined to geodetical and seismological data, could be useful for delimiting and monitoring areas of higher seismic hazard potential.展开更多
The Ecuador Mw - 7.8 earthquake on April 16, 2016, ruptured a nearly 200 km long zone along the plate interface between Nazca and South American plates which is coincident with a seismic gap since 1942, when a Mw - 7....The Ecuador Mw - 7.8 earthquake on April 16, 2016, ruptured a nearly 200 km long zone along the plate interface between Nazca and South American plates which is coincident with a seismic gap since 1942, when a Mw - 7.8 earthquake happened. This earthquake occurred at a margin characterized by moderately big to giant earthquakes such as the 1906 （Mw 8.8）. A heavily sedimented trench explains the abnormal lengths of the rupture zones in this system as inhibits the role of natural barriers on the propagation of rupture zones. High amount of sediment thickness is associated with tropical climates, high erosion rates and eastward Pacific dominant winds that provoke orographic rainfalls over the Pacific slope of the Ecuatorian Andes. Offshore sediment dispersion off the oceanic trench is controlled by a close arrangement of two aseismic ridges that hit the Costa Rico and South Ecuador margin respectively and a mid ocean ridge that separates the Cocos and Nazca plate trapping sediments. Gravity field and Ocean Circulation Explorer （GOCE） satellite data are used in this work to test the possible relationship between gravity signal and earthquake rupture structure as well as registered aftershock seismic activity. Reduced vertical gravity gradient shows a good correlation with rupture structure for certain degrees of the harmonic expansion and related depth of the causative mass; indicating, such as in other analyzed cases along the subduction margin, that fore-arc structure derived from density heterogeneities explains at a certain extent propagation of the rupture zones. In this analysis the rupture zone of the April 2016 Ecuador earthquake developed through a relatively low density zone of the fore-arc sliver. Finally, aftershock sequence nucleated around the area of maximum slips in the rupture zone, suggesting that heterogeneous density structure of the fore-arc determined from gravity data could be used in forecasting potential damaged zones associated with big ruptures along the subduction border.展开更多
基金CONICETthe National University of San Juan for their financial support
文摘The results obtained in this work evince that the metallic mineral deposits located in the northern region of the Chilean-Pampean flat slab(in northern Chile and north-western Argentina),at approximately 27°30’S,would be related to the subduction of the Copiapo aseismic ridge.The analysis of the gravity anomalies and vertical gravity gradient allows inferring a deflection and truncation of the main trend of the Andean structures at the extrapolated zone of the Copiapo ridge beneath South America.Thus,the general NNE-trend of the Andean structures are rotated locally to an ENE-strike within the area of the Ojos del Salado-San Buena Ventura lineament.We explain that this anomalous behavior of the gravity derived anomalies is related to the deformational effects imprinted by the ridge subduction.Regions with a low subduction angle(<30° to horizontal)are related to large mineralization due to fluids released by dehydration of the subducting crust.In addition,a higher degree of mantle melting could be produced by a thicker oceanic crust.Therefore,we interpret that the processes associated to the subduction of the Copiapo aseismic ridge(emplaced on a thickened oceanic crust due to a local compensation of the seamounts)are the cause of formation and emplacement of big metallic mineral deposits in this region of Chile and Argentina.
文摘The analysis of space-time surface deformation during earthquakes reveals the variable state of stress that occurs at deep crustal levels, and this information can be used to better understand the seismic cycle. Understanding the possible mechanisms that produce earthquake precursors is a key issue for earthquake prediction. In the last years, modern geodesy can map the degree of seismic coupling during the interseismic period, as well as the coseismic and postseismic slip for great earthquakes along subduction zones. Earthquakes usually occur due to mass transfer and consequent gravity variations, where these changes have been monitored for intraplate earthquakes by means of terrestrial gravity measurements. When stresses and correspondent rupture areas are large, affecting hundreds of thousands of square kilometres（as occurs in some segments along plate interface zones）, satellite gravimetry data become relevant. This is due to the higher spatial resolution of this type of data when compared to terrestrial data, and also due to their homogeneous precision and availability across the whole Earth.Satellite gravity missions as GOCE can map the Earth gravity field with unprecedented precision and resolution. We mapped geoid changes from two GOCE satellite models obtained by the direct approach,which combines data from other gravity missions as GRACE and LAGEOS regarding their best characteristics. The results show that the geoid height diminished from a year to five months before the main seismic event in the region where maximum slip occurred after the Pisagua Mw = 8.2 great megathrust earthquake. This diminution is interpreted as accelerated inland-directed interseismic mass transfer before the earthquake, coinciding with the intermediate degree of seismic coupling reported in the region. We highlight the advantage of satellite data for modelling surficial deformation related to preseismic displacements. This deformation, combined to geodetical and seismological data, could be useful for delimiting and monitoring areas of higher seismic hazard potential.
文摘The Ecuador Mw - 7.8 earthquake on April 16, 2016, ruptured a nearly 200 km long zone along the plate interface between Nazca and South American plates which is coincident with a seismic gap since 1942, when a Mw - 7.8 earthquake happened. This earthquake occurred at a margin characterized by moderately big to giant earthquakes such as the 1906 （Mw 8.8）. A heavily sedimented trench explains the abnormal lengths of the rupture zones in this system as inhibits the role of natural barriers on the propagation of rupture zones. High amount of sediment thickness is associated with tropical climates, high erosion rates and eastward Pacific dominant winds that provoke orographic rainfalls over the Pacific slope of the Ecuatorian Andes. Offshore sediment dispersion off the oceanic trench is controlled by a close arrangement of two aseismic ridges that hit the Costa Rico and South Ecuador margin respectively and a mid ocean ridge that separates the Cocos and Nazca plate trapping sediments. Gravity field and Ocean Circulation Explorer （GOCE） satellite data are used in this work to test the possible relationship between gravity signal and earthquake rupture structure as well as registered aftershock seismic activity. Reduced vertical gravity gradient shows a good correlation with rupture structure for certain degrees of the harmonic expansion and related depth of the causative mass; indicating, such as in other analyzed cases along the subduction margin, that fore-arc structure derived from density heterogeneities explains at a certain extent propagation of the rupture zones. In this analysis the rupture zone of the April 2016 Ecuador earthquake developed through a relatively low density zone of the fore-arc sliver. Finally, aftershock sequence nucleated around the area of maximum slips in the rupture zone, suggesting that heterogeneous density structure of the fore-arc determined from gravity data could be used in forecasting potential damaged zones associated with big ruptures along the subduction border.
