The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilize...The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilized yttrium.Using Rietveld refinement,it was found that the obtained fcc phase has crystallite size smaller than 10 nm and microstrain larger than 10-3.Both conditions are required to form an fcc phase in Ti-based alloys.For all samples,the microstructure of the fcc phase consists of equiaxial crystallites with sizes smaller than 10 nm.The largest presence of fcc phase in the studied Ti alloy was found with 6 at.%Sn,because this alloy exhibits the largest microstrain(1.5×10-2)and crystallite size of 6.5 nm.Experimental data reveal that a solid solution and an amorphous phase were formed during milling.The necessary conditions to promote the formation of solid solution and amorphous phases were determined using thermodynamic calculations.When the amount of Sn increases,the energy required to form an amorphous phase varies from approximately 10 to approximately-5 k J/mol for 3 and 12 at.%Sn,respectively.The thermodynamic calculations are in agreement with XRD patterns analysis and HRTEM results.展开更多
Background:Forefoot strike(FFS) and rearfoot strike(RFS) runners differ in their kinematics,force loading rates,and joint loading patterns,but the timing of their muscle activation is less clear.Methods:Forty recreati...Background:Forefoot strike(FFS) and rearfoot strike(RFS) runners differ in their kinematics,force loading rates,and joint loading patterns,but the timing of their muscle activation is less clear.Methods:Forty recreational and highly trained runners ran at four speeds barefoot and shod on a motorized treadmill. "Barefoot" runners wore thin,five-toed socks and shod runners wore neutral running shoes.Subjects were instructed to run comfortably at each speed with no instructions about foot strike patterns.Results:Eleven runners landed with an FFS when barefoot and shod and eleven runners landed with an RFS when barefoot and shod.The 18remaining runners shifted from an FFS when barefoot to an RFS when shod(shifters).Shod shifters ran with a lower stride frequency and greater stride length than all other runners.All FFS runners landed with more plantarflexed ankles and more vertical lower legs at the beginning of stance compared to RFS runners.FFS runners activated their plantarflexor muscles 1 1%earlier and 10%longer than RFS runners.Conclusion:This earlier and longer relative activation of the plantarrlexors likely enhances the capacity for the passive structures of the foot and ankle to store elastic energy,and may also enhance the performance of the active muscle by increasing the storage of elastic strain energy in the cross-bridaes and activated thin.展开更多
The objective of the Apollon project is the generation of 10 PW peak power pulses of 15 fs at 1 shot/minute. In this paper the Apollon facility design, the technological challenges and the current progress of the proj...The objective of the Apollon project is the generation of 10 PW peak power pulses of 15 fs at 1 shot/minute. In this paper the Apollon facility design, the technological challenges and the current progress of the project will be presented.展开更多
基金financial support from FONDECYT Project No.1190797FONDEQUIP/EQM Project No.140095。
文摘The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilized yttrium.Using Rietveld refinement,it was found that the obtained fcc phase has crystallite size smaller than 10 nm and microstrain larger than 10-3.Both conditions are required to form an fcc phase in Ti-based alloys.For all samples,the microstructure of the fcc phase consists of equiaxial crystallites with sizes smaller than 10 nm.The largest presence of fcc phase in the studied Ti alloy was found with 6 at.%Sn,because this alloy exhibits the largest microstrain(1.5×10-2)and crystallite size of 6.5 nm.Experimental data reveal that a solid solution and an amorphous phase were formed during milling.The necessary conditions to promote the formation of solid solution and amorphous phases were determined using thermodynamic calculations.When the amount of Sn increases,the energy required to form an amorphous phase varies from approximately 10 to approximately-5 k J/mol for 3 and 12 at.%Sn,respectively.The thermodynamic calculations are in agreement with XRD patterns analysis and HRTEM results.
基金the Purves Summer Research AwardSherman Fairchild Foundation+1 种基金National Science Foundation (NSF-0634592)Howard Hughes Medical Institute Undergraduate Science Program award 52006301 to Harvey Mudd College
文摘Background:Forefoot strike(FFS) and rearfoot strike(RFS) runners differ in their kinematics,force loading rates,and joint loading patterns,but the timing of their muscle activation is less clear.Methods:Forty recreational and highly trained runners ran at four speeds barefoot and shod on a motorized treadmill. "Barefoot" runners wore thin,five-toed socks and shod runners wore neutral running shoes.Subjects were instructed to run comfortably at each speed with no instructions about foot strike patterns.Results:Eleven runners landed with an FFS when barefoot and shod and eleven runners landed with an RFS when barefoot and shod.The 18remaining runners shifted from an FFS when barefoot to an RFS when shod(shifters).Shod shifters ran with a lower stride frequency and greater stride length than all other runners.All FFS runners landed with more plantarflexed ankles and more vertical lower legs at the beginning of stance compared to RFS runners.FFS runners activated their plantarflexor muscles 1 1%earlier and 10%longer than RFS runners.Conclusion:This earlier and longer relative activation of the plantarrlexors likely enhances the capacity for the passive structures of the foot and ankle to store elastic energy,and may also enhance the performance of the active muscle by increasing the storage of elastic strain energy in the cross-bridaes and activated thin.
基金financial support from the ILE-APOLLON 07-CPER 017-01 contract
文摘The objective of the Apollon project is the generation of 10 PW peak power pulses of 15 fs at 1 shot/minute. In this paper the Apollon facility design, the technological challenges and the current progress of the project will be presented.
