A new Ni–Cr–Si–B–Fe fi ller material is prepared for transient liquid-phase(TLP)bonding of Inconel 718 superalloy by mechanical alloying technique.The melting temperature range of the fi ller material and its acti...A new Ni–Cr–Si–B–Fe fi ller material is prepared for transient liquid-phase(TLP)bonding of Inconel 718 superalloy by mechanical alloying technique.The melting temperature range of the fi ller material and its activation energy of melting are determined by diff erential scanning calorimetry technique.The activation energy and melting temperature of the alloy powder decrease with increasing milling time.Inconel 718 alloy was joined via TLP by using the newly developed fi ller material.The eff ect of TLP bonding temperature and time on microstructural evolution and mechanical properties of the joint was investigated.Three distinct microstructural regions were observed in the bonding area:isothermal solidifi cation zone consisting of a single-phase solid solution,diff usion aff ected zone consisting of extensive diff usion-induced precipitates of metallic boride,and unaff ected base material.The ultimate shear strength and microhardness of the TLP-bonded joint increase with bonding time and temperature.展开更多
基金financially supported by the Department of Mechanical engineering and Central Instruments Facility of Indian Institute of Technology Guwahati,India-781039。
文摘A new Ni–Cr–Si–B–Fe fi ller material is prepared for transient liquid-phase(TLP)bonding of Inconel 718 superalloy by mechanical alloying technique.The melting temperature range of the fi ller material and its activation energy of melting are determined by diff erential scanning calorimetry technique.The activation energy and melting temperature of the alloy powder decrease with increasing milling time.Inconel 718 alloy was joined via TLP by using the newly developed fi ller material.The eff ect of TLP bonding temperature and time on microstructural evolution and mechanical properties of the joint was investigated.Three distinct microstructural regions were observed in the bonding area:isothermal solidifi cation zone consisting of a single-phase solid solution,diff usion aff ected zone consisting of extensive diff usion-induced precipitates of metallic boride,and unaff ected base material.The ultimate shear strength and microhardness of the TLP-bonded joint increase with bonding time and temperature.
