The effect of final hot rolling in the intercritical (α+γ) region on microstructure and properties is very specific to the individual processing conditions and the chemical composition of a steel.S460 is a plate ste...The effect of final hot rolling in the intercritical (α+γ) region on microstructure and properties is very specific to the individual processing conditions and the chemical composition of a steel.S460 is a plate steel processed in this way.To reproduce at the laboratory scale,a multi-stage simulation was developed which included a high temperature austenite deformation and an isothermal hold.The effect of the applied cooling rate following intercritical deformation was investigated.At 1K/s (typical industrial cooling) the microstructure was similar to the reference sample,but included an intragranular ferrite fraction.This was due to differences in processing history,and considered to be linked to a larger prior austenite grain size.At an accelerated cooling rate (15K/s),acicular ferrite formed on shear bands within the strained austenite phase.EBSD scans have been completed to provide further information about the microstructures,with band contrast able to identify the pearlite phase at the slowest cooling rate.This is a starting point from which to focus on the ferrite morphologies.展开更多
The effects of large strain and strain path reversal on the deformation microstructure evolution in austenite below the recrystallisation temperature were studied by hot torsion using a non-transforming Fe-30wt%Ni mod...The effects of large strain and strain path reversal on the deformation microstructure evolution in austenite below the recrystallisation temperature were studied by hot torsion using a non-transforming Fe-30wt%Ni model austenitic alloy.Results show that the high angle boundaries (HABs) can be generated by both microstructure mechanism through dislocation accumulation and texture mechanism via subgrain rotation.However,multiple strain path reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same amount of total accumulative strain.This effect is attributed to the subgrain rotation mechanism being less effective at small strains.In comparison,the same hot torsion tests were conducted using a microalloyed steel at a temperature between Ae 3 and Ar 3.After single strain path reversal,substantial deformation-induced austenite-to-ferrite phase transformation was observed.Meanwhile,a test with multiple strain path reversals but with the same total strain produces much lower levels of strain-induced ferrite formation.This difference is correlated to the observations made in the Fe-30wt%Ni model alloy.It is believed that the different amount of strain-induced ferrite originated from the different levels of strain-induced HABs within the austenite which act as ferrite nucleation sites.展开更多
文摘The effect of final hot rolling in the intercritical (α+γ) region on microstructure and properties is very specific to the individual processing conditions and the chemical composition of a steel.S460 is a plate steel processed in this way.To reproduce at the laboratory scale,a multi-stage simulation was developed which included a high temperature austenite deformation and an isothermal hold.The effect of the applied cooling rate following intercritical deformation was investigated.At 1K/s (typical industrial cooling) the microstructure was similar to the reference sample,but included an intragranular ferrite fraction.This was due to differences in processing history,and considered to be linked to a larger prior austenite grain size.At an accelerated cooling rate (15K/s),acicular ferrite formed on shear bands within the strained austenite phase.EBSD scans have been completed to provide further information about the microstructures,with band contrast able to identify the pearlite phase at the slowest cooling rate.This is a starting point from which to focus on the ferrite morphologies.
文摘The effects of large strain and strain path reversal on the deformation microstructure evolution in austenite below the recrystallisation temperature were studied by hot torsion using a non-transforming Fe-30wt%Ni model austenitic alloy.Results show that the high angle boundaries (HABs) can be generated by both microstructure mechanism through dislocation accumulation and texture mechanism via subgrain rotation.However,multiple strain path reversals lead to less well-developed HABs in the original grains compared to single reversal deformed to the same amount of total accumulative strain.This effect is attributed to the subgrain rotation mechanism being less effective at small strains.In comparison,the same hot torsion tests were conducted using a microalloyed steel at a temperature between Ae 3 and Ar 3.After single strain path reversal,substantial deformation-induced austenite-to-ferrite phase transformation was observed.Meanwhile,a test with multiple strain path reversals but with the same total strain produces much lower levels of strain-induced ferrite formation.This difference is correlated to the observations made in the Fe-30wt%Ni model alloy.It is believed that the different amount of strain-induced ferrite originated from the different levels of strain-induced HABs within the austenite which act as ferrite nucleation sites.
