期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
电感耦合等离子体质谱测定钢中痕量镧 被引量:1
1
作者 孙娟 杜士毅 +4 位作者 王秉文 庞振兴 王贵玉 张希静 于春波 《分析仪器》 CAS 2021年第4期27-30,共4页
研究了应用标准模式的ICP-MS法定量分析钢中镧的分析方法,利用DOE实验和响应优化器优化了ICP-MS仪器工作条件,采用纯化后的硝酸溶解样品,利用铟作为内标校正,实现了钢中痕量镧元素的定量分析,并对实验过程中可能会造成影响的各个环节进... 研究了应用标准模式的ICP-MS法定量分析钢中镧的分析方法,利用DOE实验和响应优化器优化了ICP-MS仪器工作条件,采用纯化后的硝酸溶解样品,利用铟作为内标校正,实现了钢中痕量镧元素的定量分析,并对实验过程中可能会造成影响的各个环节进行了讨论。该方法检测下限为0.000054%,实验得到加标回收率为102%。 展开更多
关键词 ICP-MS La 内标
下载PDF
Demonstration on the indexes design of gravity satellite orbit parameters in the low-low satellite-to-satellite tracking mode 被引量:1
2
作者 Liu Xiaogang Li Yingchun +1 位作者 Xiao Yun pang zhenxing 《Geodesy and Geodynamics》 2013年第1期29-34,共6页
Combining with the exigent demand of the development of satellite gravimetry system in China, aiming at the determination of technical indexes of gravity satellite orbit parameters, on the basis of the numerical exper... Combining with the exigent demand of the development of satellite gravimetry system in China, aiming at the determination of technical indexes of gravity satellite orbit parameters, on the basis of the numerical experiments and results analysis, the design indexes of gravity satellite orbit height, inter-satellite range and the orbit inclination are analyzed and calculated, and the issues towards twin gravity satellites such as coherence requirement of the orbit semi-major axes, control requirement of the pitch angle and time interval requirement to keep twin satellites formation in mobility are diseussed. Results show that the satellite orbit height is 400 km to 500 km, the inter-satellite range is about 220 km, the satellite orbit inclination is between polar orbit and sun-synchronous orbit, the semi-major axes difference of twin satellites orbit is within ± 70. 146 m, the pitch angle of twin satellites is about 0.9 degree, and the time interval to keep twin satellites formation in mobility is 7 days to 15 days. 展开更多
关键词 low-low satellite-to-satellite tracking (SST-11) satellite orbit height inter-satellite range orbitinclination index design
下载PDF
X-射线荧光光谱法分析中包渣中铬元素
3
作者 闫丽 焦丽 +2 位作者 贾晓红 庞振兴 刘佳 《冶金标准化与质量》 2021年第3期4-6,10,共4页
探讨了利用熔片法制样X-射线焚光光谱法测定中包渣中铬成分的分析方法。着重对没有标准样品和样品前处理方法、制样条件、仪器参数、曲线拟合等方面进行研究,通过优化最终确定了最佳条件。本方法测定样品的准确度为0.0084%,精密度为1.7... 探讨了利用熔片法制样X-射线焚光光谱法测定中包渣中铬成分的分析方法。着重对没有标准样品和样品前处理方法、制样条件、仪器参数、曲线拟合等方面进行研究,通过优化最终确定了最佳条件。本方法测定样品的准确度为0.0084%,精密度为1.75%,与ICP-AES法比较,操作简单、易于操作、成本低、减少废液排放,满足生产需求,结果吻合性较好。 展开更多
关键词 中包渣 炫片 X-射线荧光光谱法
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部