Optimization of Maturation of Radio-Cephalic Arteriovenous Fistula Using a Model Relating Energy Loss Rate and Vascular Geometric Parameters

The main reason for the early failure of radio-cephalic arteriovenous fistula (RCAVF) is non-maturity, which means that the blood flow rate in the fistula cannot increase to the expected value for dialysis. From a mechanical perspective, the vascular resistance at the artificially designed anastomosis causes an energy loss that affects blood flow rate growth and leads to early failure. This research studied how to maximize the RCAVF maturity and primary patency by controlling the energy loss rate. We theoretically analyzed and derived a model that evaluates the energy loss rate Eavf in RCAVF as a function of its blood vessel geometric parameters (GPs) for given flow rates. There was an aggregate of five controllable GPs in RCAVF: radial artery diameter (Dra), cephalic vein diameter (Dcv), blood vessel distance between artery and vein (h), anastomotic diameter (Da), and anastomotic angle (θ). Through this analysis, it was found that Eavf was inversely proportional to Dra, Dcv, Da, and θ, whereas proportional to h. Therefore, we recommended surgeons choose the vessels with large diameters, close distance, and increase the diameter and angle of the anastomosis to decrease the early failure of RCAVF. Simultaneously, we could explain the results of many clinical empiricisms with our formula. We found that increasing Dcv and θ was more significant in reducing Eavf than increasing Dra and Da. Based on our model, we could define two critical energy loss rates (CELa, CELb) to help surgeons evaluate the blood vessels and choose the ideal range of θ, and help them design the preoperative RCAVF plan for each patient to increase the maturity and the primary patency of RCAVF.

A Computational Analysis of the Influence of Anastomosis Angle on Stenosis-Prone Locations during Radio-Cephalic Arteriovenous Fistula Maturation

In dialysis treatment, the radio-cephalic arteriovenous fistula (RCAVF) is a commonly used fistula, yet its low maturation rate remains a challenge. To enhance surgical outcomes, the relationship between stenosis-prone locations and RCAVF anastomosis angle is studied during maturation by developing two sets of RCAVF models for early (non-mature) and mature RCAVFs at five anastomosis angles. The impact of hemodynamics and wall shear stress (WSS) is examined to determine optimal anastomotic angles. Results indicate that acute angles produce more physiological WSS distributions and fewer disturbed regions, with early stenosis-prone regions located near the anastomosis that shift to the bending venous segment during remodeling. A pilot study comparing clinical and numerical results is conducted for validation.

Assessment of Linear and Non-Linear Two-Equation Turbulence Models for Aerothermal Turbomachinery Flows

Three linear two-equation turbulence models k- ε, k- ω and k- 1 and a non-linear k- 1 model are used for aerodynamic and thermal turbine flow prediction. The pressure profile in the wake and the heat transfer coefficient on the blade are compared with experimental data. Good agreement is obtained with the linear k-1 model. No significant modifications are observed with the non-linear model. The balance of transport equation terms in the blade wake is also presented. Linear and non-linear k - 1 models are evaluated to predict the threedimensional vortices characterising the turbine flows. The simulations show that the passage vortex is the main origin of the losses.